diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvmdio.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvmdio.c | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c new file mode 100644 index 000000000000..74f1c157a480 --- /dev/null +++ b/drivers/net/ethernet/marvell/mvmdio.c | |||
| @@ -0,0 +1,228 @@ | |||
| 1 | /* | ||
| 2 | * Driver for the MDIO interface of Marvell network interfaces. | ||
| 3 | * | ||
| 4 | * Since the MDIO interface of Marvell network interfaces is shared | ||
| 5 | * between all network interfaces, having a single driver allows to | ||
| 6 | * handle concurrent accesses properly (you may have four Ethernet | ||
| 7 | * ports, but they in fact share the same SMI interface to access the | ||
| 8 | * MDIO bus). Moreover, this MDIO interface code is similar between | ||
| 9 | * the mv643xx_eth driver and the mvneta driver. For now, it is only | ||
| 10 | * used by the mvneta driver, but it could later be used by the | ||
| 11 | * mv643xx_eth driver as well. | ||
| 12 | * | ||
| 13 | * Copyright (C) 2012 Marvell | ||
| 14 | * | ||
| 15 | * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | ||
| 16 | * | ||
| 17 | * This file is licensed under the terms of the GNU General Public | ||
| 18 | * License version 2. This program is licensed "as is" without any | ||
| 19 | * warranty of any kind, whether express or implied. | ||
| 20 | */ | ||
| 21 | |||
| 22 | #include <linux/init.h> | ||
| 23 | #include <linux/kernel.h> | ||
| 24 | #include <linux/module.h> | ||
| 25 | #include <linux/mutex.h> | ||
| 26 | #include <linux/phy.h> | ||
| 27 | #include <linux/of_address.h> | ||
| 28 | #include <linux/of_mdio.h> | ||
| 29 | #include <linux/platform_device.h> | ||
| 30 | #include <linux/delay.h> | ||
| 31 | |||
| 32 | #define MVMDIO_SMI_DATA_SHIFT 0 | ||
| 33 | #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 | ||
| 34 | #define MVMDIO_SMI_PHY_REG_SHIFT 21 | ||
| 35 | #define MVMDIO_SMI_READ_OPERATION BIT(26) | ||
| 36 | #define MVMDIO_SMI_WRITE_OPERATION 0 | ||
| 37 | #define MVMDIO_SMI_READ_VALID BIT(27) | ||
| 38 | #define MVMDIO_SMI_BUSY BIT(28) | ||
| 39 | |||
| 40 | struct orion_mdio_dev { | ||
| 41 | struct mutex lock; | ||
| 42 | void __iomem *smireg; | ||
| 43 | }; | ||
| 44 | |||
| 45 | /* Wait for the SMI unit to be ready for another operation | ||
| 46 | */ | ||
| 47 | static int orion_mdio_wait_ready(struct mii_bus *bus) | ||
| 48 | { | ||
| 49 | struct orion_mdio_dev *dev = bus->priv; | ||
| 50 | int count; | ||
| 51 | u32 val; | ||
| 52 | |||
| 53 | count = 0; | ||
| 54 | while (1) { | ||
| 55 | val = readl(dev->smireg); | ||
| 56 | if (!(val & MVMDIO_SMI_BUSY)) | ||
| 57 | break; | ||
| 58 | |||
| 59 | if (count > 100) { | ||
| 60 | dev_err(bus->parent, "Timeout: SMI busy for too long\n"); | ||
| 61 | return -ETIMEDOUT; | ||
| 62 | } | ||
| 63 | |||
| 64 | udelay(10); | ||
| 65 | count++; | ||
| 66 | } | ||
| 67 | |||
| 68 | return 0; | ||
| 69 | } | ||
| 70 | |||
| 71 | static int orion_mdio_read(struct mii_bus *bus, int mii_id, | ||
| 72 | int regnum) | ||
| 73 | { | ||
| 74 | struct orion_mdio_dev *dev = bus->priv; | ||
| 75 | int count; | ||
| 76 | u32 val; | ||
| 77 | int ret; | ||
| 78 | |||
| 79 | mutex_lock(&dev->lock); | ||
| 80 | |||
| 81 | ret = orion_mdio_wait_ready(bus); | ||
| 82 | if (ret < 0) { | ||
| 83 | mutex_unlock(&dev->lock); | ||
| 84 | return ret; | ||
| 85 | } | ||
| 86 | |||
| 87 | writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | | ||
| 88 | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | | ||
| 89 | MVMDIO_SMI_READ_OPERATION), | ||
| 90 | dev->smireg); | ||
| 91 | |||
| 92 | /* Wait for the value to become available */ | ||
| 93 | count = 0; | ||
| 94 | while (1) { | ||
| 95 | val = readl(dev->smireg); | ||
| 96 | if (val & MVMDIO_SMI_READ_VALID) | ||
| 97 | break; | ||
| 98 | |||
| 99 | if (count > 100) { | ||
| 100 | dev_err(bus->parent, "Timeout when reading PHY\n"); | ||
| 101 | mutex_unlock(&dev->lock); | ||
| 102 | return -ETIMEDOUT; | ||
| 103 | } | ||
| 104 | |||
| 105 | udelay(10); | ||
| 106 | count++; | ||
| 107 | } | ||
| 108 | |||
| 109 | mutex_unlock(&dev->lock); | ||
| 110 | |||
| 111 | return val & 0xFFFF; | ||
| 112 | } | ||
| 113 | |||
| 114 | static int orion_mdio_write(struct mii_bus *bus, int mii_id, | ||
| 115 | int regnum, u16 value) | ||
| 116 | { | ||
| 117 | struct orion_mdio_dev *dev = bus->priv; | ||
| 118 | int ret; | ||
| 119 | |||
| 120 | mutex_lock(&dev->lock); | ||
| 121 | |||
| 122 | ret = orion_mdio_wait_ready(bus); | ||
| 123 | if (ret < 0) { | ||
| 124 | mutex_unlock(&dev->lock); | ||
| 125 | return ret; | ||
| 126 | } | ||
| 127 | |||
| 128 | writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | | ||
| 129 | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | | ||
| 130 | MVMDIO_SMI_WRITE_OPERATION | | ||
| 131 | (value << MVMDIO_SMI_DATA_SHIFT)), | ||
| 132 | dev->smireg); | ||
| 133 | |||
| 134 | mutex_unlock(&dev->lock); | ||
| 135 | |||
| 136 | return 0; | ||
| 137 | } | ||
| 138 | |||
| 139 | static int orion_mdio_reset(struct mii_bus *bus) | ||
| 140 | { | ||
| 141 | return 0; | ||
| 142 | } | ||
| 143 | |||
| 144 | static int orion_mdio_probe(struct platform_device *pdev) | ||
| 145 | { | ||
| 146 | struct device_node *np = pdev->dev.of_node; | ||
| 147 | struct mii_bus *bus; | ||
| 148 | struct orion_mdio_dev *dev; | ||
| 149 | int i, ret; | ||
| 150 | |||
| 151 | bus = mdiobus_alloc_size(sizeof(struct orion_mdio_dev)); | ||
| 152 | if (!bus) { | ||
| 153 | dev_err(&pdev->dev, "Cannot allocate MDIO bus\n"); | ||
| 154 | return -ENOMEM; | ||
| 155 | } | ||
| 156 | |||
| 157 | bus->name = "orion_mdio_bus"; | ||
| 158 | bus->read = orion_mdio_read; | ||
| 159 | bus->write = orion_mdio_write; | ||
| 160 | bus->reset = orion_mdio_reset; | ||
| 161 | snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", | ||
| 162 | dev_name(&pdev->dev)); | ||
| 163 | bus->parent = &pdev->dev; | ||
| 164 | |||
| 165 | bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); | ||
| 166 | if (!bus->irq) { | ||
| 167 | dev_err(&pdev->dev, "Cannot allocate PHY IRQ array\n"); | ||
| 168 | mdiobus_free(bus); | ||
| 169 | return -ENOMEM; | ||
| 170 | } | ||
| 171 | |||
| 172 | for (i = 0; i < PHY_MAX_ADDR; i++) | ||
| 173 | bus->irq[i] = PHY_POLL; | ||
| 174 | |||
| 175 | dev = bus->priv; | ||
| 176 | dev->smireg = of_iomap(pdev->dev.of_node, 0); | ||
| 177 | if (!dev->smireg) { | ||
| 178 | dev_err(&pdev->dev, "No SMI register address given in DT\n"); | ||
| 179 | kfree(bus->irq); | ||
| 180 | mdiobus_free(bus); | ||
| 181 | return -ENODEV; | ||
| 182 | } | ||
| 183 | |||
| 184 | mutex_init(&dev->lock); | ||
| 185 | |||
| 186 | ret = of_mdiobus_register(bus, np); | ||
| 187 | if (ret < 0) { | ||
| 188 | dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); | ||
| 189 | iounmap(dev->smireg); | ||
| 190 | kfree(bus->irq); | ||
| 191 | mdiobus_free(bus); | ||
| 192 | return ret; | ||
| 193 | } | ||
| 194 | |||
| 195 | platform_set_drvdata(pdev, bus); | ||
| 196 | |||
| 197 | return 0; | ||
| 198 | } | ||
| 199 | |||
| 200 | static int orion_mdio_remove(struct platform_device *pdev) | ||
| 201 | { | ||
| 202 | struct mii_bus *bus = platform_get_drvdata(pdev); | ||
| 203 | mdiobus_unregister(bus); | ||
| 204 | kfree(bus->irq); | ||
| 205 | mdiobus_free(bus); | ||
| 206 | return 0; | ||
| 207 | } | ||
| 208 | |||
| 209 | static const struct of_device_id orion_mdio_match[] = { | ||
| 210 | { .compatible = "marvell,orion-mdio" }, | ||
| 211 | { } | ||
| 212 | }; | ||
| 213 | MODULE_DEVICE_TABLE(of, orion_mdio_match); | ||
| 214 | |||
| 215 | static struct platform_driver orion_mdio_driver = { | ||
| 216 | .probe = orion_mdio_probe, | ||
| 217 | .remove = orion_mdio_remove, | ||
| 218 | .driver = { | ||
| 219 | .name = "orion-mdio", | ||
| 220 | .of_match_table = orion_mdio_match, | ||
| 221 | }, | ||
| 222 | }; | ||
| 223 | |||
| 224 | module_platform_driver(orion_mdio_driver); | ||
| 225 | |||
| 226 | MODULE_DESCRIPTION("Marvell MDIO interface driver"); | ||
| 227 | MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>"); | ||
| 228 | MODULE_LICENSE("GPL"); | ||
