diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-arm-versatile.c')
-rw-r--r-- | drivers/gpu/drm/panel/panel-arm-versatile.c | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c new file mode 100644 index 000000000000..3930b4925b15 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-arm-versatile.c | |||
@@ -0,0 +1,377 @@ | |||
1 | // SPDX-License-Identifier: GPL-2.0 | ||
2 | /* | ||
3 | * Panel driver for the ARM Versatile family reference designs from | ||
4 | * ARM Limited. | ||
5 | * | ||
6 | * Author: | ||
7 | * Linus Walleij <linus.wallei@linaro.org> | ||
8 | * | ||
9 | * On the Versatile AB, these panels come mounted on daughterboards | ||
10 | * named "IB1" or "IB2" (Interface Board 1 & 2 respectively.) They | ||
11 | * are documented in ARM DUI 0225D Appendix C and D. These daughter | ||
12 | * boards support TFT display panels. | ||
13 | * | ||
14 | * - The IB1 is a passive board where the display connector defines a | ||
15 | * few wires for encoding the display type for autodetection, | ||
16 | * suitable display settings can then be looked up from this setting. | ||
17 | * The magic bits can be read out from the system controller. | ||
18 | * | ||
19 | * - The IB2 is a more complex board intended for GSM phone development | ||
20 | * with some logic and a control register, which needs to be accessed | ||
21 | * and the board display needs to be turned on explicitly. | ||
22 | * | ||
23 | * On the Versatile PB, a special CLCD adaptor board is available | ||
24 | * supporting the same displays as the Versatile AB, plus one more | ||
25 | * Epson QCIF display. | ||
26 | * | ||
27 | */ | ||
28 | #include <drm/drmP.h> | ||
29 | #include <drm/drm_panel.h> | ||
30 | |||
31 | #include <linux/bitops.h> | ||
32 | #include <linux/init.h> | ||
33 | #include <linux/kernel.h> | ||
34 | #include <linux/mfd/syscon.h> | ||
35 | #include <linux/module.h> | ||
36 | #include <linux/platform_device.h> | ||
37 | #include <linux/regmap.h> | ||
38 | |||
39 | #include <video/of_videomode.h> | ||
40 | #include <video/videomode.h> | ||
41 | |||
42 | /* | ||
43 | * This configuration register in the Versatile and RealView | ||
44 | * family is uniformly present but appears more and more | ||
45 | * unutilized starting with the RealView series. | ||
46 | */ | ||
47 | #define SYS_CLCD 0x50 | ||
48 | |||
49 | /* The Versatile can detect the connected panel type */ | ||
50 | #define SYS_CLCD_CLCDID_MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12)) | ||
51 | #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) | ||
52 | #define SYS_CLCD_ID_SHARP_8_4 (0x01 << 8) | ||
53 | #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) | ||
54 | #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) | ||
55 | #define SYS_CLCD_ID_VGA (0x1f << 8) | ||
56 | |||
57 | /* IB2 control register for the Versatile daughterboard */ | ||
58 | #define IB2_CTRL 0x00 | ||
59 | #define IB2_CTRL_LCD_SD BIT(1) /* 1 = shut down LCD */ | ||
60 | #define IB2_CTRL_LCD_BL_ON BIT(0) | ||
61 | #define IB2_CTRL_LCD_MASK (BIT(0)|BIT(1)) | ||
62 | |||
63 | /** | ||
64 | * struct versatile_panel_type - lookup struct for the supported panels | ||
65 | */ | ||
66 | struct versatile_panel_type { | ||
67 | /** | ||
68 | * @name: the name of this panel | ||
69 | */ | ||
70 | const char *name; | ||
71 | /** | ||
72 | * @magic: the magic value from the detection register | ||
73 | */ | ||
74 | u32 magic; | ||
75 | /** | ||
76 | * @mode: the DRM display mode for this panel | ||
77 | */ | ||
78 | struct drm_display_mode mode; | ||
79 | /** | ||
80 | * @bus_flags: the DRM bus flags for this panel e.g. inverted clock | ||
81 | */ | ||
82 | u32 bus_flags; | ||
83 | /** | ||
84 | * @width_mm: the panel width in mm | ||
85 | */ | ||
86 | u32 width_mm; | ||
87 | /** | ||
88 | * @height_mm: the panel height in mm | ||
89 | */ | ||
90 | u32 height_mm; | ||
91 | /** | ||
92 | * @ib2: the panel may be connected on an IB2 daughterboard | ||
93 | */ | ||
94 | bool ib2; | ||
95 | }; | ||
96 | |||
97 | /** | ||
98 | * struct versatile_panel - state container for the Versatile panels | ||
99 | */ | ||
100 | struct versatile_panel { | ||
101 | /** | ||
102 | * @dev: the container device | ||
103 | */ | ||
104 | struct device *dev; | ||
105 | /** | ||
106 | * @panel: the DRM panel instance for this device | ||
107 | */ | ||
108 | struct drm_panel panel; | ||
109 | /** | ||
110 | * @panel_type: the Versatile panel type as detected | ||
111 | */ | ||
112 | const struct versatile_panel_type *panel_type; | ||
113 | /** | ||
114 | * @map: map to the parent syscon where the main register reside | ||
115 | */ | ||
116 | struct regmap *map; | ||
117 | /** | ||
118 | * @ib2_map: map to the IB2 syscon, if applicable | ||
119 | */ | ||
120 | struct regmap *ib2_map; | ||
121 | }; | ||
122 | |||
123 | static const struct versatile_panel_type versatile_panels[] = { | ||
124 | /* | ||
125 | * Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT | ||
126 | * found on the Versatile AB IB1 connector or the Versatile | ||
127 | * PB adaptor board connector. | ||
128 | */ | ||
129 | { | ||
130 | .name = "Sanyo TM38QV67A02A", | ||
131 | .magic = SYS_CLCD_ID_SANYO_3_8, | ||
132 | .width_mm = 79, | ||
133 | .height_mm = 54, | ||
134 | .mode = { | ||
135 | .clock = 10000000, | ||
136 | .hdisplay = 320, | ||
137 | .hsync_start = 320 + 6, | ||
138 | .hsync_end = 320 + 6 + 6, | ||
139 | .htotal = 320 + 6 + 6 + 6, | ||
140 | .vdisplay = 240, | ||
141 | .vsync_start = 240 + 5, | ||
142 | .vsync_end = 240 + 5 + 6, | ||
143 | .vtotal = 240 + 5 + 6 + 5, | ||
144 | .vrefresh = 116, | ||
145 | .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, | ||
146 | }, | ||
147 | }, | ||
148 | /* | ||
149 | * Sharp LQ084V1DG21 640x480 VGA Color TFT module | ||
150 | * found on the Versatile AB IB1 connector or the Versatile | ||
151 | * PB adaptor board connector. | ||
152 | */ | ||
153 | { | ||
154 | .name = "Sharp LQ084V1DG21", | ||
155 | .magic = SYS_CLCD_ID_SHARP_8_4, | ||
156 | .width_mm = 171, | ||
157 | .height_mm = 130, | ||
158 | .mode = { | ||
159 | .clock = 25000000, | ||
160 | .hdisplay = 640, | ||
161 | .hsync_start = 640 + 24, | ||
162 | .hsync_end = 640 + 24 + 96, | ||
163 | .htotal = 640 + 24 + 96 + 24, | ||
164 | .vdisplay = 480, | ||
165 | .vsync_start = 480 + 11, | ||
166 | .vsync_end = 480 + 11 + 2, | ||
167 | .vtotal = 480 + 11 + 2 + 32, | ||
168 | .vrefresh = 60, | ||
169 | .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, | ||
170 | }, | ||
171 | }, | ||
172 | /* | ||
173 | * Epson L2F50113T00 - 2.2 inch QCIF 176x220 Color TFT | ||
174 | * found on the Versatile PB adaptor board connector. | ||
175 | */ | ||
176 | { | ||
177 | .name = "Epson L2F50113T00", | ||
178 | .magic = SYS_CLCD_ID_EPSON_2_2, | ||
179 | .width_mm = 34, | ||
180 | .height_mm = 45, | ||
181 | .mode = { | ||
182 | .clock = 625000000, | ||
183 | .hdisplay = 176, | ||
184 | .hsync_start = 176 + 2, | ||
185 | .hsync_end = 176 + 2 + 3, | ||
186 | .htotal = 176 + 2 + 3 + 3, | ||
187 | .vdisplay = 220, | ||
188 | .vsync_start = 220 + 0, | ||
189 | .vsync_end = 220 + 0 + 2, | ||
190 | .vtotal = 220 + 0 + 2 + 1, | ||
191 | .vrefresh = 390, | ||
192 | .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, | ||
193 | }, | ||
194 | .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE, | ||
195 | }, | ||
196 | /* | ||
197 | * Sanyo ALR252RGT 240x320 portrait display found on the | ||
198 | * Versatile AB IB2 daughterboard for GSM prototyping. | ||
199 | */ | ||
200 | { | ||
201 | .name = "Sanyo ALR252RGT", | ||
202 | .magic = SYS_CLCD_ID_SANYO_2_5, | ||
203 | .width_mm = 37, | ||
204 | .height_mm = 50, | ||
205 | .mode = { | ||
206 | .clock = 5400000, | ||
207 | .hdisplay = 240, | ||
208 | .hsync_start = 240 + 10, | ||
209 | .hsync_end = 240 + 10 + 10, | ||
210 | .htotal = 240 + 10 + 10 + 20, | ||
211 | .vdisplay = 320, | ||
212 | .vsync_start = 320 + 2, | ||
213 | .vsync_end = 320 + 2 + 2, | ||
214 | .vtotal = 320 + 2 + 2 + 2, | ||
215 | .vrefresh = 116, | ||
216 | .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, | ||
217 | }, | ||
218 | .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE, | ||
219 | .ib2 = true, | ||
220 | }, | ||
221 | }; | ||
222 | |||
223 | static inline struct versatile_panel * | ||
224 | to_versatile_panel(struct drm_panel *panel) | ||
225 | { | ||
226 | return container_of(panel, struct versatile_panel, panel); | ||
227 | } | ||
228 | |||
229 | static int versatile_panel_disable(struct drm_panel *panel) | ||
230 | { | ||
231 | struct versatile_panel *vpanel = to_versatile_panel(panel); | ||
232 | |||
233 | /* If we're on an IB2 daughterboard, turn off display */ | ||
234 | if (vpanel->ib2_map) { | ||
235 | dev_dbg(vpanel->dev, "disable IB2 display\n"); | ||
236 | regmap_update_bits(vpanel->ib2_map, | ||
237 | IB2_CTRL, | ||
238 | IB2_CTRL_LCD_MASK, | ||
239 | IB2_CTRL_LCD_SD); | ||
240 | } | ||
241 | |||
242 | return 0; | ||
243 | } | ||
244 | |||
245 | static int versatile_panel_enable(struct drm_panel *panel) | ||
246 | { | ||
247 | struct versatile_panel *vpanel = to_versatile_panel(panel); | ||
248 | |||
249 | /* If we're on an IB2 daughterboard, turn on display */ | ||
250 | if (vpanel->ib2_map) { | ||
251 | dev_dbg(vpanel->dev, "enable IB2 display\n"); | ||
252 | regmap_update_bits(vpanel->ib2_map, | ||
253 | IB2_CTRL, | ||
254 | IB2_CTRL_LCD_MASK, | ||
255 | IB2_CTRL_LCD_BL_ON); | ||
256 | } | ||
257 | |||
258 | return 0; | ||
259 | } | ||
260 | |||
261 | static int versatile_panel_get_modes(struct drm_panel *panel) | ||
262 | { | ||
263 | struct drm_connector *connector = panel->connector; | ||
264 | struct versatile_panel *vpanel = to_versatile_panel(panel); | ||
265 | struct drm_display_mode *mode; | ||
266 | |||
267 | strncpy(connector->display_info.name, vpanel->panel_type->name, | ||
268 | DRM_DISPLAY_INFO_LEN); | ||
269 | connector->display_info.width_mm = vpanel->panel_type->width_mm; | ||
270 | connector->display_info.height_mm = vpanel->panel_type->height_mm; | ||
271 | connector->display_info.bus_flags = vpanel->panel_type->bus_flags; | ||
272 | |||
273 | mode = drm_mode_duplicate(panel->drm, &vpanel->panel_type->mode); | ||
274 | drm_mode_set_name(mode); | ||
275 | mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | ||
276 | |||
277 | mode->width_mm = vpanel->panel_type->width_mm; | ||
278 | mode->height_mm = vpanel->panel_type->height_mm; | ||
279 | drm_mode_probed_add(connector, mode); | ||
280 | |||
281 | return 1; | ||
282 | } | ||
283 | |||
284 | static const struct drm_panel_funcs versatile_panel_drm_funcs = { | ||
285 | .disable = versatile_panel_disable, | ||
286 | .enable = versatile_panel_enable, | ||
287 | .get_modes = versatile_panel_get_modes, | ||
288 | }; | ||
289 | |||
290 | static int versatile_panel_probe(struct platform_device *pdev) | ||
291 | { | ||
292 | struct device *dev = &pdev->dev; | ||
293 | struct versatile_panel *vpanel; | ||
294 | struct device *parent; | ||
295 | struct regmap *map; | ||
296 | int ret; | ||
297 | u32 val; | ||
298 | int i; | ||
299 | |||
300 | parent = dev->parent; | ||
301 | if (!parent) { | ||
302 | dev_err(dev, "no parent for versatile panel\n"); | ||
303 | return -ENODEV; | ||
304 | } | ||
305 | map = syscon_node_to_regmap(parent->of_node); | ||
306 | if (IS_ERR(map)) { | ||
307 | dev_err(dev, "no regmap for versatile panel parent\n"); | ||
308 | return PTR_ERR(map); | ||
309 | } | ||
310 | |||
311 | vpanel = devm_kzalloc(dev, sizeof(*vpanel), GFP_KERNEL); | ||
312 | if (!vpanel) | ||
313 | return -ENOMEM; | ||
314 | |||
315 | ret = regmap_read(map, SYS_CLCD, &val); | ||
316 | if (ret) { | ||
317 | dev_err(dev, "cannot access syscon regs\n"); | ||
318 | return ret; | ||
319 | } | ||
320 | |||
321 | val &= SYS_CLCD_CLCDID_MASK; | ||
322 | |||
323 | for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) { | ||
324 | const struct versatile_panel_type *pt; | ||
325 | |||
326 | pt = &versatile_panels[i]; | ||
327 | if (pt->magic == val) { | ||
328 | vpanel->panel_type = pt; | ||
329 | break; | ||
330 | } | ||
331 | } | ||
332 | |||
333 | /* No panel detected or VGA, let's leave this show */ | ||
334 | if (i == ARRAY_SIZE(versatile_panels)) { | ||
335 | dev_info(dev, "no panel detected\n"); | ||
336 | return -ENODEV; | ||
337 | } | ||
338 | |||
339 | dev_info(dev, "detected: %s\n", vpanel->panel_type->name); | ||
340 | vpanel->dev = dev; | ||
341 | vpanel->map = map; | ||
342 | |||
343 | /* Check if the panel is mounted on an IB2 daughterboard */ | ||
344 | if (vpanel->panel_type->ib2) { | ||
345 | vpanel->ib2_map = syscon_regmap_lookup_by_compatible( | ||
346 | "arm,versatile-ib2-syscon"); | ||
347 | if (IS_ERR(vpanel->ib2_map)) | ||
348 | vpanel->ib2_map = NULL; | ||
349 | else | ||
350 | dev_info(dev, "panel mounted on IB2 daughterboard\n"); | ||
351 | } | ||
352 | |||
353 | drm_panel_init(&vpanel->panel); | ||
354 | vpanel->panel.dev = dev; | ||
355 | vpanel->panel.funcs = &versatile_panel_drm_funcs; | ||
356 | |||
357 | return drm_panel_add(&vpanel->panel); | ||
358 | } | ||
359 | |||
360 | static const struct of_device_id versatile_panel_match[] = { | ||
361 | { .compatible = "arm,versatile-tft-panel", }, | ||
362 | {}, | ||
363 | }; | ||
364 | MODULE_DEVICE_TABLE(of, versatile_panel_match); | ||
365 | |||
366 | static struct platform_driver versatile_panel_driver = { | ||
367 | .probe = versatile_panel_probe, | ||
368 | .driver = { | ||
369 | .name = "versatile-tft-panel", | ||
370 | .of_match_table = versatile_panel_match, | ||
371 | }, | ||
372 | }; | ||
373 | module_platform_driver(versatile_panel_driver); | ||
374 | |||
375 | MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); | ||
376 | MODULE_DESCRIPTION("ARM Versatile panel driver"); | ||
377 | MODULE_LICENSE("GPL v2"); | ||