diff options
Diffstat (limited to 'drivers/fpga/altera-cvp.c')
-rw-r--r-- | drivers/fpga/altera-cvp.c | 339 |
1 files changed, 268 insertions, 71 deletions
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c index 53b963071c7b..4e0edb60bfba 100644 --- a/drivers/fpga/altera-cvp.c +++ b/drivers/fpga/altera-cvp.c | |||
@@ -22,10 +22,10 @@ | |||
22 | #define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */ | 22 | #define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */ |
23 | 23 | ||
24 | /* Vendor Specific Extended Capability Registers */ | 24 | /* Vendor Specific Extended Capability Registers */ |
25 | #define VSE_PCIE_EXT_CAP_ID 0x200 | 25 | #define VSE_PCIE_EXT_CAP_ID 0x0 |
26 | #define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */ | 26 | #define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */ |
27 | 27 | ||
28 | #define VSE_CVP_STATUS 0x21c /* 32bit */ | 28 | #define VSE_CVP_STATUS 0x1c /* 32bit */ |
29 | #define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */ | 29 | #define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */ |
30 | #define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */ | 30 | #define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */ |
31 | #define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */ | 31 | #define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */ |
@@ -33,26 +33,44 @@ | |||
33 | #define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */ | 33 | #define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */ |
34 | #define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */ | 34 | #define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */ |
35 | 35 | ||
36 | #define VSE_CVP_MODE_CTRL 0x220 /* 32bit */ | 36 | #define VSE_CVP_MODE_CTRL 0x20 /* 32bit */ |
37 | #define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */ | 37 | #define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */ |
38 | #define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */ | 38 | #define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */ |
39 | #define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */ | 39 | #define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */ |
40 | #define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8) | 40 | #define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8) |
41 | 41 | ||
42 | #define VSE_CVP_DATA 0x228 /* 32bit */ | 42 | #define VSE_CVP_DATA 0x28 /* 32bit */ |
43 | #define VSE_CVP_PROG_CTRL 0x22c /* 32bit */ | 43 | #define VSE_CVP_PROG_CTRL 0x2c /* 32bit */ |
44 | #define VSE_CVP_PROG_CTRL_CONFIG BIT(0) | 44 | #define VSE_CVP_PROG_CTRL_CONFIG BIT(0) |
45 | #define VSE_CVP_PROG_CTRL_START_XFER BIT(1) | 45 | #define VSE_CVP_PROG_CTRL_START_XFER BIT(1) |
46 | #define VSE_CVP_PROG_CTRL_MASK GENMASK(1, 0) | ||
46 | 47 | ||
47 | #define VSE_UNCOR_ERR_STATUS 0x234 /* 32bit */ | 48 | #define VSE_UNCOR_ERR_STATUS 0x34 /* 32bit */ |
48 | #define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */ | 49 | #define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */ |
49 | 50 | ||
51 | #define V1_VSEC_OFFSET 0x200 /* Vendor Specific Offset V1 */ | ||
52 | /* V2 Defines */ | ||
53 | #define VSE_CVP_TX_CREDITS 0x49 /* 8bit */ | ||
54 | |||
55 | #define V2_CREDIT_TIMEOUT_US 20000 | ||
56 | #define V2_CHECK_CREDIT_US 10 | ||
57 | #define V2_POLL_TIMEOUT_US 1000000 | ||
58 | #define V2_USER_TIMEOUT_US 500000 | ||
59 | |||
60 | #define V1_POLL_TIMEOUT_US 10 | ||
61 | |||
50 | #define DRV_NAME "altera-cvp" | 62 | #define DRV_NAME "altera-cvp" |
51 | #define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager" | 63 | #define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager" |
52 | 64 | ||
65 | /* Write block sizes */ | ||
66 | #define ALTERA_CVP_V1_SIZE 4 | ||
67 | #define ALTERA_CVP_V2_SIZE 4096 | ||
68 | |||
53 | /* Optional CvP config error status check for debugging */ | 69 | /* Optional CvP config error status check for debugging */ |
54 | static bool altera_cvp_chkcfg; | 70 | static bool altera_cvp_chkcfg; |
55 | 71 | ||
72 | struct cvp_priv; | ||
73 | |||
56 | struct altera_cvp_conf { | 74 | struct altera_cvp_conf { |
57 | struct fpga_manager *mgr; | 75 | struct fpga_manager *mgr; |
58 | struct pci_dev *pci_dev; | 76 | struct pci_dev *pci_dev; |
@@ -61,14 +79,47 @@ struct altera_cvp_conf { | |||
61 | u32 data); | 79 | u32 data); |
62 | char mgr_name[64]; | 80 | char mgr_name[64]; |
63 | u8 numclks; | 81 | u8 numclks; |
82 | u32 sent_packets; | ||
83 | u32 vsec_offset; | ||
84 | const struct cvp_priv *priv; | ||
85 | }; | ||
86 | |||
87 | struct cvp_priv { | ||
88 | void (*switch_clk)(struct altera_cvp_conf *conf); | ||
89 | int (*clear_state)(struct altera_cvp_conf *conf); | ||
90 | int (*wait_credit)(struct fpga_manager *mgr, u32 blocks); | ||
91 | size_t block_size; | ||
92 | int poll_time_us; | ||
93 | int user_time_us; | ||
64 | }; | 94 | }; |
65 | 95 | ||
96 | static int altera_read_config_byte(struct altera_cvp_conf *conf, | ||
97 | int where, u8 *val) | ||
98 | { | ||
99 | return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where, | ||
100 | val); | ||
101 | } | ||
102 | |||
103 | static int altera_read_config_dword(struct altera_cvp_conf *conf, | ||
104 | int where, u32 *val) | ||
105 | { | ||
106 | return pci_read_config_dword(conf->pci_dev, conf->vsec_offset + where, | ||
107 | val); | ||
108 | } | ||
109 | |||
110 | static int altera_write_config_dword(struct altera_cvp_conf *conf, | ||
111 | int where, u32 val) | ||
112 | { | ||
113 | return pci_write_config_dword(conf->pci_dev, conf->vsec_offset + where, | ||
114 | val); | ||
115 | } | ||
116 | |||
66 | static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr) | 117 | static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr) |
67 | { | 118 | { |
68 | struct altera_cvp_conf *conf = mgr->priv; | 119 | struct altera_cvp_conf *conf = mgr->priv; |
69 | u32 status; | 120 | u32 status; |
70 | 121 | ||
71 | pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status); | 122 | altera_read_config_dword(conf, VSE_CVP_STATUS, &status); |
72 | 123 | ||
73 | if (status & VSE_CVP_STATUS_CFG_DONE) | 124 | if (status & VSE_CVP_STATUS_CFG_DONE) |
74 | return FPGA_MGR_STATE_OPERATING; | 125 | return FPGA_MGR_STATE_OPERATING; |
@@ -86,7 +137,8 @@ static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val) | |||
86 | 137 | ||
87 | static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val) | 138 | static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val) |
88 | { | 139 | { |
89 | pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val); | 140 | pci_write_config_dword(conf->pci_dev, conf->vsec_offset + VSE_CVP_DATA, |
141 | val); | ||
90 | } | 142 | } |
91 | 143 | ||
92 | /* switches between CvP clock and internal clock */ | 144 | /* switches between CvP clock and internal clock */ |
@@ -96,10 +148,10 @@ static void altera_cvp_dummy_write(struct altera_cvp_conf *conf) | |||
96 | u32 val; | 148 | u32 val; |
97 | 149 | ||
98 | /* set 1 CVP clock cycle for every CVP Data Register Write */ | 150 | /* set 1 CVP clock cycle for every CVP Data Register Write */ |
99 | pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val); | 151 | altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val); |
100 | val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK; | 152 | val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK; |
101 | val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF; | 153 | val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF; |
102 | pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val); | 154 | altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val); |
103 | 155 | ||
104 | for (i = 0; i < CVP_DUMMY_WR; i++) | 156 | for (i = 0; i < CVP_DUMMY_WR; i++) |
105 | conf->write_data(conf, 0); /* dummy data, could be any value */ | 157 | conf->write_data(conf, 0); /* dummy data, could be any value */ |
@@ -116,7 +168,7 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask, | |||
116 | retries++; | 168 | retries++; |
117 | 169 | ||
118 | do { | 170 | do { |
119 | pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val); | 171 | altera_read_config_dword(conf, VSE_CVP_STATUS, &val); |
120 | if ((val & status_mask) == status_val) | 172 | if ((val & status_mask) == status_val) |
121 | return 0; | 173 | return 0; |
122 | 174 | ||
@@ -127,32 +179,136 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask, | |||
127 | return -ETIMEDOUT; | 179 | return -ETIMEDOUT; |
128 | } | 180 | } |
129 | 181 | ||
182 | static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes) | ||
183 | { | ||
184 | struct altera_cvp_conf *conf = mgr->priv; | ||
185 | u32 val; | ||
186 | int ret; | ||
187 | |||
188 | /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */ | ||
189 | ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val); | ||
190 | if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) { | ||
191 | dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n", | ||
192 | bytes); | ||
193 | return -EPROTO; | ||
194 | } | ||
195 | return 0; | ||
196 | } | ||
197 | |||
198 | /* | ||
199 | * CvP Version2 Functions | ||
200 | * Recent Intel FPGAs use a credit mechanism to throttle incoming | ||
201 | * bitstreams and a different method of clearing the state. | ||
202 | */ | ||
203 | |||
204 | static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf) | ||
205 | { | ||
206 | u32 val; | ||
207 | int ret; | ||
208 | |||
209 | /* Clear the START_XFER and CVP_CONFIG bits */ | ||
210 | ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val); | ||
211 | if (ret) { | ||
212 | dev_err(&conf->pci_dev->dev, | ||
213 | "Error reading CVP Program Control Register\n"); | ||
214 | return ret; | ||
215 | } | ||
216 | |||
217 | val &= ~VSE_CVP_PROG_CTRL_MASK; | ||
218 | ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val); | ||
219 | if (ret) { | ||
220 | dev_err(&conf->pci_dev->dev, | ||
221 | "Error writing CVP Program Control Register\n"); | ||
222 | return ret; | ||
223 | } | ||
224 | |||
225 | return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, | ||
226 | conf->priv->poll_time_us); | ||
227 | } | ||
228 | |||
229 | static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr, | ||
230 | u32 blocks) | ||
231 | { | ||
232 | u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US; | ||
233 | struct altera_cvp_conf *conf = mgr->priv; | ||
234 | int ret; | ||
235 | u8 val; | ||
236 | |||
237 | do { | ||
238 | ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val); | ||
239 | if (ret) { | ||
240 | dev_err(&conf->pci_dev->dev, | ||
241 | "Error reading CVP Credit Register\n"); | ||
242 | return ret; | ||
243 | } | ||
244 | |||
245 | /* Return if there is space in FIFO */ | ||
246 | if (val - (u8)conf->sent_packets) | ||
247 | return 0; | ||
248 | |||
249 | ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE); | ||
250 | if (ret) { | ||
251 | dev_err(&conf->pci_dev->dev, | ||
252 | "CE Bit error credit reg[0x%x]:sent[0x%x]\n", | ||
253 | val, conf->sent_packets); | ||
254 | return -EAGAIN; | ||
255 | } | ||
256 | |||
257 | /* Limit the check credit byte traffic */ | ||
258 | usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1); | ||
259 | } while (timeout--); | ||
260 | |||
261 | dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n"); | ||
262 | return -ETIMEDOUT; | ||
263 | } | ||
264 | |||
265 | static int altera_cvp_send_block(struct altera_cvp_conf *conf, | ||
266 | const u32 *data, size_t len) | ||
267 | { | ||
268 | u32 mask, words = len / sizeof(u32); | ||
269 | int i, remainder; | ||
270 | |||
271 | for (i = 0; i < words; i++) | ||
272 | conf->write_data(conf, *data++); | ||
273 | |||
274 | /* write up to 3 trailing bytes, if any */ | ||
275 | remainder = len % sizeof(u32); | ||
276 | if (remainder) { | ||
277 | mask = BIT(remainder * 8) - 1; | ||
278 | if (mask) | ||
279 | conf->write_data(conf, *data & mask); | ||
280 | } | ||
281 | |||
282 | return 0; | ||
283 | } | ||
284 | |||
130 | static int altera_cvp_teardown(struct fpga_manager *mgr, | 285 | static int altera_cvp_teardown(struct fpga_manager *mgr, |
131 | struct fpga_image_info *info) | 286 | struct fpga_image_info *info) |
132 | { | 287 | { |
133 | struct altera_cvp_conf *conf = mgr->priv; | 288 | struct altera_cvp_conf *conf = mgr->priv; |
134 | struct pci_dev *pdev = conf->pci_dev; | ||
135 | int ret; | 289 | int ret; |
136 | u32 val; | 290 | u32 val; |
137 | 291 | ||
138 | /* STEP 12 - reset START_XFER bit */ | 292 | /* STEP 12 - reset START_XFER bit */ |
139 | pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val); | 293 | altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val); |
140 | val &= ~VSE_CVP_PROG_CTRL_START_XFER; | 294 | val &= ~VSE_CVP_PROG_CTRL_START_XFER; |
141 | pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val); | 295 | altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val); |
142 | 296 | ||
143 | /* STEP 13 - reset CVP_CONFIG bit */ | 297 | /* STEP 13 - reset CVP_CONFIG bit */ |
144 | val &= ~VSE_CVP_PROG_CTRL_CONFIG; | 298 | val &= ~VSE_CVP_PROG_CTRL_CONFIG; |
145 | pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val); | 299 | altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val); |
146 | 300 | ||
147 | /* | 301 | /* |
148 | * STEP 14 | 302 | * STEP 14 |
149 | * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy | 303 | * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy |
150 | * writes to the HIP | 304 | * writes to the HIP |
151 | */ | 305 | */ |
152 | altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */ | 306 | if (conf->priv->switch_clk) |
307 | conf->priv->switch_clk(conf); | ||
153 | 308 | ||
154 | /* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */ | 309 | /* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */ |
155 | ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10); | 310 | ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, |
311 | conf->priv->poll_time_us); | ||
156 | if (ret) | 312 | if (ret) |
157 | dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n"); | 313 | dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n"); |
158 | 314 | ||
@@ -164,7 +320,6 @@ static int altera_cvp_write_init(struct fpga_manager *mgr, | |||
164 | const char *buf, size_t count) | 320 | const char *buf, size_t count) |
165 | { | 321 | { |
166 | struct altera_cvp_conf *conf = mgr->priv; | 322 | struct altera_cvp_conf *conf = mgr->priv; |
167 | struct pci_dev *pdev = conf->pci_dev; | ||
168 | u32 iflags, val; | 323 | u32 iflags, val; |
169 | int ret; | 324 | int ret; |
170 | 325 | ||
@@ -184,7 +339,7 @@ static int altera_cvp_write_init(struct fpga_manager *mgr, | |||
184 | conf->numclks = 1; /* for uncompressed and unencrypted images */ | 339 | conf->numclks = 1; /* for uncompressed and unencrypted images */ |
185 | 340 | ||
186 | /* STEP 1 - read CVP status and check CVP_EN flag */ | 341 | /* STEP 1 - read CVP status and check CVP_EN flag */ |
187 | pci_read_config_dword(pdev, VSE_CVP_STATUS, &val); | 342 | altera_read_config_dword(conf, VSE_CVP_STATUS, &val); |
188 | if (!(val & VSE_CVP_STATUS_CVP_EN)) { | 343 | if (!(val & VSE_CVP_STATUS_CVP_EN)) { |
189 | dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val); | 344 | dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val); |
190 | return -ENODEV; | 345 | return -ENODEV; |
@@ -202,30 +357,42 @@ static int altera_cvp_write_init(struct fpga_manager *mgr, | |||
202 | * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned) | 357 | * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned) |
203 | */ | 358 | */ |
204 | /* switch from fabric to PMA clock */ | 359 | /* switch from fabric to PMA clock */ |
205 | pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val); | 360 | altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val); |
206 | val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL; | 361 | val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL; |
207 | pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val); | 362 | altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val); |
208 | 363 | ||
209 | /* set CVP mode */ | 364 | /* set CVP mode */ |
210 | pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val); | 365 | altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val); |
211 | val |= VSE_CVP_MODE_CTRL_CVP_MODE; | 366 | val |= VSE_CVP_MODE_CTRL_CVP_MODE; |
212 | pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val); | 367 | altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val); |
213 | 368 | ||
214 | /* | 369 | /* |
215 | * STEP 3 | 370 | * STEP 3 |
216 | * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP | 371 | * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP |
217 | */ | 372 | */ |
218 | altera_cvp_dummy_write(conf); | 373 | if (conf->priv->switch_clk) |
374 | conf->priv->switch_clk(conf); | ||
375 | |||
376 | if (conf->priv->clear_state) { | ||
377 | ret = conf->priv->clear_state(conf); | ||
378 | if (ret) { | ||
379 | dev_err(&mgr->dev, "Problem clearing out state\n"); | ||
380 | return ret; | ||
381 | } | ||
382 | } | ||
383 | |||
384 | conf->sent_packets = 0; | ||
219 | 385 | ||
220 | /* STEP 4 - set CVP_CONFIG bit */ | 386 | /* STEP 4 - set CVP_CONFIG bit */ |
221 | pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val); | 387 | altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val); |
222 | /* request control block to begin transfer using CVP */ | 388 | /* request control block to begin transfer using CVP */ |
223 | val |= VSE_CVP_PROG_CTRL_CONFIG; | 389 | val |= VSE_CVP_PROG_CTRL_CONFIG; |
224 | pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val); | 390 | altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val); |
225 | 391 | ||
226 | /* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */ | 392 | /* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */ |
227 | ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, | 393 | ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, |
228 | VSE_CVP_STATUS_CFG_RDY, 10); | 394 | VSE_CVP_STATUS_CFG_RDY, |
395 | conf->priv->poll_time_us); | ||
229 | if (ret) { | 396 | if (ret) { |
230 | dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n"); | 397 | dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n"); |
231 | return ret; | 398 | return ret; |
@@ -235,33 +402,28 @@ static int altera_cvp_write_init(struct fpga_manager *mgr, | |||
235 | * STEP 6 | 402 | * STEP 6 |
236 | * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP | 403 | * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP |
237 | */ | 404 | */ |
238 | altera_cvp_dummy_write(conf); | 405 | if (conf->priv->switch_clk) |
406 | conf->priv->switch_clk(conf); | ||
407 | |||
408 | if (altera_cvp_chkcfg) { | ||
409 | ret = altera_cvp_chk_error(mgr, 0); | ||
410 | if (ret) { | ||
411 | dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n"); | ||
412 | return ret; | ||
413 | } | ||
414 | } | ||
239 | 415 | ||
240 | /* STEP 7 - set START_XFER */ | 416 | /* STEP 7 - set START_XFER */ |
241 | pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val); | 417 | altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val); |
242 | val |= VSE_CVP_PROG_CTRL_START_XFER; | 418 | val |= VSE_CVP_PROG_CTRL_START_XFER; |
243 | pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val); | 419 | altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val); |
244 | 420 | ||
245 | /* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */ | 421 | /* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */ |
246 | pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val); | 422 | if (conf->priv->switch_clk) { |
247 | val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK; | 423 | altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val); |
248 | val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF; | 424 | val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK; |
249 | pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val); | 425 | val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF; |
250 | 426 | altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val); | |
251 | return 0; | ||
252 | } | ||
253 | |||
254 | static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes) | ||
255 | { | ||
256 | struct altera_cvp_conf *conf = mgr->priv; | ||
257 | u32 val; | ||
258 | |||
259 | /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */ | ||
260 | pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val); | ||
261 | if (val & VSE_CVP_STATUS_CFG_ERR) { | ||
262 | dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n", | ||
263 | bytes); | ||
264 | return -EPROTO; | ||
265 | } | 427 | } |
266 | return 0; | 428 | return 0; |
267 | } | 429 | } |
@@ -270,20 +432,32 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf, | |||
270 | size_t count) | 432 | size_t count) |
271 | { | 433 | { |
272 | struct altera_cvp_conf *conf = mgr->priv; | 434 | struct altera_cvp_conf *conf = mgr->priv; |
435 | size_t done, remaining, len; | ||
273 | const u32 *data; | 436 | const u32 *data; |
274 | size_t done, remaining; | ||
275 | int status = 0; | 437 | int status = 0; |
276 | u32 mask; | ||
277 | 438 | ||
278 | /* STEP 9 - write 32-bit data from RBF file to CVP data register */ | 439 | /* STEP 9 - write 32-bit data from RBF file to CVP data register */ |
279 | data = (u32 *)buf; | 440 | data = (u32 *)buf; |
280 | remaining = count; | 441 | remaining = count; |
281 | done = 0; | 442 | done = 0; |
282 | 443 | ||
283 | while (remaining >= 4) { | 444 | while (remaining) { |
284 | conf->write_data(conf, *data++); | 445 | /* Use credit throttling if available */ |
285 | done += 4; | 446 | if (conf->priv->wait_credit) { |
286 | remaining -= 4; | 447 | status = conf->priv->wait_credit(mgr, done); |
448 | if (status) { | ||
449 | dev_err(&conf->pci_dev->dev, | ||
450 | "Wait Credit ERR: 0x%x\n", status); | ||
451 | return status; | ||
452 | } | ||
453 | } | ||
454 | |||
455 | len = min(conf->priv->block_size, remaining); | ||
456 | altera_cvp_send_block(conf, data, len); | ||
457 | data += len / sizeof(u32); | ||
458 | done += len; | ||
459 | remaining -= len; | ||
460 | conf->sent_packets++; | ||
287 | 461 | ||
288 | /* | 462 | /* |
289 | * STEP 10 (optional) and STEP 11 | 463 | * STEP 10 (optional) and STEP 11 |
@@ -301,11 +475,6 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf, | |||
301 | } | 475 | } |
302 | } | 476 | } |
303 | 477 | ||
304 | /* write up to 3 trailing bytes, if any */ | ||
305 | mask = BIT(remaining * 8) - 1; | ||
306 | if (mask) | ||
307 | conf->write_data(conf, *data & mask); | ||
308 | |||
309 | if (altera_cvp_chkcfg) | 478 | if (altera_cvp_chkcfg) |
310 | status = altera_cvp_chk_error(mgr, count); | 479 | status = altera_cvp_chk_error(mgr, count); |
311 | 480 | ||
@@ -316,31 +485,30 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr, | |||
316 | struct fpga_image_info *info) | 485 | struct fpga_image_info *info) |
317 | { | 486 | { |
318 | struct altera_cvp_conf *conf = mgr->priv; | 487 | struct altera_cvp_conf *conf = mgr->priv; |
319 | struct pci_dev *pdev = conf->pci_dev; | 488 | u32 mask, val; |
320 | int ret; | 489 | int ret; |
321 | u32 mask; | ||
322 | u32 val; | ||
323 | 490 | ||
324 | ret = altera_cvp_teardown(mgr, info); | 491 | ret = altera_cvp_teardown(mgr, info); |
325 | if (ret) | 492 | if (ret) |
326 | return ret; | 493 | return ret; |
327 | 494 | ||
328 | /* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */ | 495 | /* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */ |
329 | pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val); | 496 | altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val); |
330 | if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) { | 497 | if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) { |
331 | dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n"); | 498 | dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n"); |
332 | return -EPROTO; | 499 | return -EPROTO; |
333 | } | 500 | } |
334 | 501 | ||
335 | /* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */ | 502 | /* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */ |
336 | pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val); | 503 | altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val); |
337 | val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL; | 504 | val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL; |
338 | val &= ~VSE_CVP_MODE_CTRL_CVP_MODE; | 505 | val &= ~VSE_CVP_MODE_CTRL_CVP_MODE; |
339 | pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val); | 506 | altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val); |
340 | 507 | ||
341 | /* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */ | 508 | /* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */ |
342 | mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE; | 509 | mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE; |
343 | ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US); | 510 | ret = altera_cvp_wait_status(conf, mask, mask, |
511 | conf->priv->user_time_us); | ||
344 | if (ret) | 512 | if (ret) |
345 | dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n"); | 513 | dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n"); |
346 | 514 | ||
@@ -354,6 +522,21 @@ static const struct fpga_manager_ops altera_cvp_ops = { | |||
354 | .write_complete = altera_cvp_write_complete, | 522 | .write_complete = altera_cvp_write_complete, |
355 | }; | 523 | }; |
356 | 524 | ||
525 | static const struct cvp_priv cvp_priv_v1 = { | ||
526 | .switch_clk = altera_cvp_dummy_write, | ||
527 | .block_size = ALTERA_CVP_V1_SIZE, | ||
528 | .poll_time_us = V1_POLL_TIMEOUT_US, | ||
529 | .user_time_us = TIMEOUT_US, | ||
530 | }; | ||
531 | |||
532 | static const struct cvp_priv cvp_priv_v2 = { | ||
533 | .clear_state = altera_cvp_v2_clear_state, | ||
534 | .wait_credit = altera_cvp_v2_wait_for_credit, | ||
535 | .block_size = ALTERA_CVP_V2_SIZE, | ||
536 | .poll_time_us = V2_POLL_TIMEOUT_US, | ||
537 | .user_time_us = V2_USER_TIMEOUT_US, | ||
538 | }; | ||
539 | |||
357 | static ssize_t chkcfg_show(struct device_driver *dev, char *buf) | 540 | static ssize_t chkcfg_show(struct device_driver *dev, char *buf) |
358 | { | 541 | { |
359 | return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg); | 542 | return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg); |
@@ -395,22 +578,29 @@ static int altera_cvp_probe(struct pci_dev *pdev, | |||
395 | { | 578 | { |
396 | struct altera_cvp_conf *conf; | 579 | struct altera_cvp_conf *conf; |
397 | struct fpga_manager *mgr; | 580 | struct fpga_manager *mgr; |
581 | int ret, offset; | ||
398 | u16 cmd, val; | 582 | u16 cmd, val; |
399 | u32 regval; | 583 | u32 regval; |
400 | int ret; | 584 | |
585 | /* Discover the Vendor Specific Offset for this device */ | ||
586 | offset = pci_find_next_ext_capability(pdev, 0, PCI_EXT_CAP_ID_VNDR); | ||
587 | if (!offset) { | ||
588 | dev_err(&pdev->dev, "No Vendor Specific Offset.\n"); | ||
589 | return -ENODEV; | ||
590 | } | ||
401 | 591 | ||
402 | /* | 592 | /* |
403 | * First check if this is the expected FPGA device. PCI config | 593 | * First check if this is the expected FPGA device. PCI config |
404 | * space access works without enabling the PCI device, memory | 594 | * space access works without enabling the PCI device, memory |
405 | * space access is enabled further down. | 595 | * space access is enabled further down. |
406 | */ | 596 | */ |
407 | pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val); | 597 | pci_read_config_word(pdev, offset + VSE_PCIE_EXT_CAP_ID, &val); |
408 | if (val != VSE_PCIE_EXT_CAP_ID_VAL) { | 598 | if (val != VSE_PCIE_EXT_CAP_ID_VAL) { |
409 | dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val); | 599 | dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val); |
410 | return -ENODEV; | 600 | return -ENODEV; |
411 | } | 601 | } |
412 | 602 | ||
413 | pci_read_config_dword(pdev, VSE_CVP_STATUS, ®val); | 603 | pci_read_config_dword(pdev, offset + VSE_CVP_STATUS, ®val); |
414 | if (!(regval & VSE_CVP_STATUS_CVP_EN)) { | 604 | if (!(regval & VSE_CVP_STATUS_CVP_EN)) { |
415 | dev_err(&pdev->dev, | 605 | dev_err(&pdev->dev, |
416 | "CVP is disabled for this device: CVP_STATUS Reg 0x%x\n", | 606 | "CVP is disabled for this device: CVP_STATUS Reg 0x%x\n", |
@@ -422,6 +612,8 @@ static int altera_cvp_probe(struct pci_dev *pdev, | |||
422 | if (!conf) | 612 | if (!conf) |
423 | return -ENOMEM; | 613 | return -ENOMEM; |
424 | 614 | ||
615 | conf->vsec_offset = offset; | ||
616 | |||
425 | /* | 617 | /* |
426 | * Enable memory BAR access. We cannot use pci_enable_device() here | 618 | * Enable memory BAR access. We cannot use pci_enable_device() here |
427 | * because it will make the driver unusable with FPGA devices that | 619 | * because it will make the driver unusable with FPGA devices that |
@@ -446,6 +638,11 @@ static int altera_cvp_probe(struct pci_dev *pdev, | |||
446 | conf->pci_dev = pdev; | 638 | conf->pci_dev = pdev; |
447 | conf->write_data = altera_cvp_write_data_iomem; | 639 | conf->write_data = altera_cvp_write_data_iomem; |
448 | 640 | ||
641 | if (conf->vsec_offset == V1_VSEC_OFFSET) | ||
642 | conf->priv = &cvp_priv_v1; | ||
643 | else | ||
644 | conf->priv = &cvp_priv_v2; | ||
645 | |||
449 | conf->map = pci_iomap(pdev, CVP_BAR, 0); | 646 | conf->map = pci_iomap(pdev, CVP_BAR, 0); |
450 | if (!conf->map) { | 647 | if (!conf->map) { |
451 | dev_warn(&pdev->dev, "Mapping CVP BAR failed\n"); | 648 | dev_warn(&pdev->dev, "Mapping CVP BAR failed\n"); |