82 files changed, 928 insertions, 371 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7f99cd652203..eb7bb511f853 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)         += clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)          += cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)          += davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)        += digicolor
 machine-$(CONFIG_ARCH_DOVE)             += dove
 machine-$(CONFIG_ARCH_EBSA110)          += ebsa110
 machine-$(CONFIG_ARCH_EFM32)            += efm32
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2c6248d9a9ef..c3255e0c90aa 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -301,3 +301,11 @@
        cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
        cd-inverted;
 };
+&aes {
+        status = "okay";
+};
+&sham {
+        status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 83d40f7655e5..6b8493720424 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,11 +24,3 @@
 &mmc1 {
        vmmc-supply = <&ldo3_reg>;
 };
-&sham {
-        status = "okay";
-};
-&aes {
-        status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index df5fee6b6b4b..87fc7a35e802 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -15,6 +15,7 @@
 #include "am33xx.dtsi"
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 / {
        model = "TI AM335x EVM-SK";
@@ -647,6 +648,16 @@
        cap-power-off-card;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+                ref-clock-frequency = <38400000>;
+        };
 };
 &mcasp1 {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 7266a00aab2e..5c5667a3624d 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -328,6 +328,10 @@
        dual_emac_res_vlan = <3>;
 };
+&phy_sel {
+        rmii-clock-ext;
+};
 &mac {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 712edce7d6fb..071b56aa0c7e 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -99,7 +99,7 @@
        ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <0>;
                reg = <0x0664>;
        };
@@ -107,7 +107,7 @@
        ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <1>;
                reg = <0x0664>;
        };
@@ -115,7 +115,7 @@
        ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <2>;
                reg = <0x0664>;
        };
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c7dc9dab93a4..cfb49686ab6a 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -107,7 +107,7 @@
        ehrpwm0_tbclk: ehrpwm0_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <0>;
                reg = <0x0664>;
        };
@@ -115,7 +115,7 @@
        ehrpwm1_tbclk: ehrpwm1_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <1>;
                reg = <0x0664>;
        };
@@ -123,7 +123,7 @@
        ehrpwm2_tbclk: ehrpwm2_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <2>;
                reg = <0x0664>;
        };
@@ -131,7 +131,7 @@
        ehrpwm3_tbclk: ehrpwm3_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <4>;
                reg = <0x0664>;
        };
@@ -139,7 +139,7 @@
        ehrpwm4_tbclk: ehrpwm4_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <5>;
                reg = <0x0664>;
        };
@@ -147,7 +147,7 @@
        ehrpwm5_tbclk: ehrpwm5_tbclk {
                #clock-cells = <0>;
                compatible = "ti,gate-clock";
-                clocks = <&dpll_per_m2_ck>;
+                clocks = <&l4ls_gclk>;
                ti,bit-shift = <6>;
                reg = <0x0664>;
        };
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index ac2c5dd03663..e7f0a4ae271c 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -853,7 +853,7 @@
                        };
                        usb1: gadget@fffa4000 {
-                                compatible = "atmel,at91rm9200-udc";
+                                compatible = "atmel,at91sam9260-udc";
                                reg = <0xfffa4000 0x4000>;
                                interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
                                clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index e247b0b5fdab..d55fdf2487ef 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -124,11 +124,12 @@
                        };
                        usb1: gadget@fffa4000 {
-                                compatible = "atmel,at91rm9200-udc";
+                                compatible = "atmel,at91sam9261-udc";
                                reg = <0xfffa4000 0x4000>;
                                interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-                                clocks = <&usb>, <&udc_clk>, <&udpck>;
+                                clocks = <&udc_clk>, <&udpck>;
-                                clock-names = "usb_clk", "udc_clk", "udpck";
+                                clock-names = "pclk", "hclk";
+                                atmel,matrix = <&matrix>;
                                status = "disabled";
                        };
@@ -262,7 +263,7 @@
                        };
                        matrix: matrix@ffffee00 {
-                                compatible = "atmel,at91sam9260-bus-matrix";
+                                compatible = "atmel,at91sam9260-bus-matrix", "syscon";
                                reg = <0xffffee00 0x200>;
                        };
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 088219d1c8ce..fce301c4e9d6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -856,7 +856,7 @@
                        };
                        usb1: gadget@fff78000 {
-                                compatible = "atmel,at91rm9200-udc";
+                                compatible = "atmel,at91sam9263-udc";
                                reg = <0xfff78000 0x4000>;
                                interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
                                clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 119893181189..488af63d5174 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1300,7 +1300,7 @@
                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
                        reg = <0x00800000 0x100000>;
                        interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-                        clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+                        clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
                        clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e77c9bb5485d..d221179d0f1a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1066,7 +1066,7 @@
                                reg = <0x00500000 0x80000
                                       0xf803c000 0x400>;
                                interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-                                clocks = <&usb>, <&udphs_clk>;
+                                clocks = <&utmi>, <&udphs_clk>;
                                clock-names = "hclk", "pclk";
                                status = "disabled";
@@ -1185,7 +1185,7 @@
                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
                        reg = <0x00700000 0x100000>;
                        interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-                        clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+                        clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
                        clock-names = "usb_clk", "ehci_clk", "uhpck";
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb1b8f5..1933ce821311 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -263,17 +263,15 @@
        dcan1_pins_default: dcan1_pins_default {
                pinctrl-single,pins = <
-                        0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+                        0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-                        0x3d4   (MUX_MODE15)            /* dcan1_rx.off */
+                        0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
-                        0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
                >;
        };
        dcan1_pins_sleep: dcan1_pins_sleep {
                pinctrl-single,pins = <
-                        0x3d0   (MUX_MODE15)    /* dcan1_tx.off */
+                        0x3d0   (MUX_MODE15 | PULL_UP)  /* dcan1_tx.off */
-                        0x3d4   (MUX_MODE15)    /* dcan1_rx.off */
+                        0x418   (MUX_MODE15 | PULL_UP)  /* wakeup0.off */
-                        0x418   (MUX_MODE15)    /* wakeup0.off */
                >;
        };
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d8711713610..48dbf0b03966 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -119,17 +119,15 @@
        dcan1_pins_default: dcan1_pins_default {
                pinctrl-single,pins = <
-                        0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+                        0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-                        0x3d4   (MUX_MODE15)            /* dcan1_rx.off */
+                        0x418   (PULL_UP | MUX_MODE1)   /* wakeup0.dcan1_rx */
-                        0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
                >;
        };
        dcan1_pins_sleep: dcan1_pins_sleep {
                pinctrl-single,pins = <
-                        0x3d0   (MUX_MODE15)    /* dcan1_tx.off */
+                        0x3d0   (MUX_MODE15 | PULL_UP)  /* dcan1_tx.off */
-                        0x3d4   (MUX_MODE15)    /* dcan1_rx.off */
+                        0x418   (MUX_MODE15 | PULL_UP)  /* wakeup0.off */
-                        0x418   (MUX_MODE15)    /* wakeup0.off */
                >;
        };
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2a9994f73974..3b933f74d000 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -243,10 +243,18 @@
                ti,invert-autoidle-bit;
        };
+        dpll_core_byp_mux: dpll_core_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                ti,bit-shift = <23>;
+                reg = <0x012c>;
+        };
        dpll_core_ck: dpll_core_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-core-clock";
-                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
                reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
        };
@@ -309,10 +317,18 @@
                clock-div = <1>;
        };
+        dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x0240>;
+        };
        dpll_dsp_ck: dpll_dsp_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+                clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
                reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
        };
@@ -335,10 +351,18 @@
                clock-div = <1>;
        };
+        dpll_iva_byp_mux: dpll_iva_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x01ac>;
+        };
        dpll_iva_ck: dpll_iva_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+                clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
                reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
        };
@@ -361,10 +385,18 @@
                clock-div = <1>;
        };
+        dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                ti,bit-shift = <23>;
+                reg = <0x02e4>;
+        };
        dpll_gpu_ck: dpll_gpu_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
                reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
        };
@@ -398,10 +430,18 @@
                clock-div = <1>;
        };
+        dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                ti,bit-shift = <23>;
+                reg = <0x021c>;
+        };
        dpll_ddr_ck: dpll_ddr_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
                reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
        };
@@ -416,10 +456,18 @@
                ti,invert-autoidle-bit;
        };
+        dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                ti,bit-shift = <23>;
+                reg = <0x02b4>;
+        };
        dpll_gmac_ck: dpll_gmac_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+                clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
                reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
        };
@@ -482,10 +530,18 @@
                clock-div = <1>;
        };
+        dpll_eve_byp_mux: dpll_eve_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x0290>;
+        };
        dpll_eve_ck: dpll_eve_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+                clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
                reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
        };
@@ -1249,10 +1305,18 @@
                clock-div = <1>;
        };
+        dpll_per_byp_mux: dpll_per_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x014c>;
+        };
        dpll_per_ck: dpll_per_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+                clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
                reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
        };
@@ -1275,10 +1339,18 @@
                clock-div = <1>;
        };
+        dpll_usb_byp_mux: dpll_usb_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x018c>;
+        };
        dpll_usb_ck: dpll_usb_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-j-type-clock";
-                clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+                clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
                reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
        };
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 277b48b0b6f9..ac6b0ae42caf 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -18,6 +18,7 @@
 */
 #include "skeleton.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 / {
@@ -193,6 +194,7 @@
                        interrupts = <0 216 0>;
                        clocks = <&cmu CLK_TMU_APBIF>;
                        clock-names = "tmu_apbif";
+                        #include "exynos4412-tmu-sensor-conf.dtsi"
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
new file mode 100644
index 000000000000..735cb2f10817
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Device tree sources for Exynos4 thermal zone
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <dt-bindings/thermal/thermal.h>
+/ {
+thermal-zones {
+        cpu_thermal: cpu-thermal {
+                thermal-sensors = <&tmu 0>;
+                polling-delay-passive = <0>;
+                polling-delay = <0>;
+                trips {
+                        cpu_alert0: cpu-alert-0 {
+                                temperature = <70000>; /* millicelsius */
+                                hysteresis = <10000>; /* millicelsius */
+                                type = "active";
+                        };
+                        cpu_alert1: cpu-alert-1 {
+                                temperature = <95000>; /* millicelsius */
+                                hysteresis = <10000>; /* millicelsius */
+                                type = "active";
+                        };
+                        cpu_alert2: cpu-alert-2 {
+                                temperature = <110000>; /* millicelsius */
+                                hysteresis = <10000>; /* millicelsius */
+                                type = "active";
+                        };
+                        cpu_crit0: cpu-crit-0 {
+                                temperature = <120000>; /* millicelsius */
+                                hysteresis = <0>; /* millicelsius */
+                                type = "critical";
+                        };
+                };
+                cooling-maps {
+                        map0 {
+                                trip = <&cpu_alert0>;
+                        };
+                        map1 {
+                                trip = <&cpu_alert1>;
+                        };
+                };
+        };
+};
+};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 76173cacd450..77ea547768f4 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -38,6 +38,7 @@
                i2c5 = &i2c_5;
                i2c6 = &i2c_6;
                i2c7 = &i2c_7;
+                i2c8 = &i2c_8;
                csis0 = &csis_0;
                csis1 = &csis_1;
                fimc0 = &fimc_0;
@@ -104,6 +105,7 @@
                compatible = "samsung,exynos4210-pd";
                reg = <0x10023C20 0x20>;
                #power-domain-cells = <0>;
+                power-domains = <&pd_lcd0>;
        };
        pd_cam: cam-power-domain@10023C00 {
@@ -554,6 +556,22 @@
                status = "disabled";
        };
+        i2c_8: i2c@138E0000 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "samsung,s3c2440-hdmiphy-i2c";
+                reg = <0x138E0000 0x100>;
+                interrupts = <0 93 0>;
+                clocks = <&clock CLK_I2C_HDMI>;
+                clock-names = "i2c";
+                status = "disabled";
+                hdmi_i2c_phy: hdmiphy@38 {
+                        compatible = "exynos4210-hdmiphy";
+                        reg = <0x38>;
+                };
+        };
        spi_0: spi@13920000 {
                compatible = "samsung,exynos4210-spi";
                reg = <0x13920000 0x100>;
@@ -663,6 +681,33 @@
                status = "disabled";
        };
+        tmu: tmu@100C0000 {
+                #include "exynos4412-tmu-sensor-conf.dtsi"
+        };
+        hdmi: hdmi@12D00000 {
+                compatible = "samsung,exynos4210-hdmi";
+                reg = <0x12D00000 0x70000>;
+                interrupts = <0 92 0>;
+                clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
+                        "mout_hdmi";
+                clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+                        <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+                        <&clock CLK_MOUT_HDMI>;
+                phy = <&hdmi_i2c_phy>;
+                power-domains = <&pd_tv>;
+                samsung,syscon-phandle = <&pmu_system_controller>;
+                status = "disabled";
+        };
+        mixer: mixer@12C10000 {
+                compatible = "samsung,exynos4210-mixer";
+                interrupts = <0 91 0>;
+                reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+                power-domains = <&pd_tv>;
+                status = "disabled";
+        };
        ppmu_dmc0: ppmu_dmc0@106a0000 {
                compatible = "samsung,exynos-ppmu";
                reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 3d6652a4b6cb..32c5fd8f6269 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -426,6 +426,25 @@
                status = "okay";
        };
+        tmu@100C0000 {
+                status = "okay";
+        };
+        thermal-zones {
+                cpu_thermal: cpu-thermal {
+                        cooling-maps {
+                                map0 {
+                                     /* Corresponds to 800MHz at freq_table */
+                                     cooling-device = <&cpu0 2 2>;
+                                };
+                                map1 {
+                                     /* Corresponds to 200MHz at freq_table */
+                                     cooling-device = <&cpu0 4 4>;
+                               };
+                       };
+                };
+        };
        camera {
                pinctrl-names = "default";
                pinctrl-0 = <>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index b57e6b82ea20..d4f2b11319dd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -505,6 +505,63 @@
                        assigned-clock-rates = <0>, <160000000>;
                };
        };
+        hdmi_en: voltage-regulator-hdmi-5v {
+                compatible = "regulator-fixed";
+                regulator-name = "HDMI_5V";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                gpio = <&gpe0 1 0>;
+                enable-active-high;
+        };
+        hdmi_ddc: i2c-ddc {
+                compatible = "i2c-gpio";
+                gpios = <&gpe4 2 0 &gpe4 3 0>;
+                i2c-gpio,delay-us = <100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                pinctrl-0 = <&i2c_ddc_bus>;
+                pinctrl-names = "default";
+                status = "okay";
+        };
+        mixer@12C10000 {
+                status = "okay";
+        };
+        hdmi@12D00000 {
+                hpd-gpio = <&gpx3 7 0>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&hdmi_hpd>;
+                hdmi-en-supply = <&hdmi_en>;
+                vdd-supply = <&ldo3_reg>;
+                vdd_osc-supply = <&ldo4_reg>;
+                vdd_pll-supply = <&ldo3_reg>;
+                ddc = <&hdmi_ddc>;
+                status = "okay";
+        };
+        i2c@138E0000 {
+                status = "okay";
+        };
+};
+&pinctrl_1 {
+        hdmi_hpd: hdmi-hpd {
+                samsung,pins = "gpx3-7";
+                samsung,pin-pud = <0>;
+        };
+};
+&pinctrl_0 {
+        i2c_ddc_bus: i2c-ddc-bus {
+                samsung,pins = "gpe4-2", "gpe4-3";
+                samsung,pin-function = <2>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <0>;
+        };
 };
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 67c832c9dcf1..be89f83f70e7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -21,6 +21,7 @@
 #include "exynos4.dtsi"
 #include "exynos4210-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 / {
        compatible = "samsung,exynos4210", "samsung,exynos4";
@@ -35,10 +36,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
-                cpu@900 {
+                cpu0: cpu@900 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0x900>;
+                        cooling-min-level = <4>;
+                        cooling-max-level = <2>;
+                        #cooling-cells = <2>; /* min followed by max */
                };
                cpu@901 {
@@ -153,16 +157,38 @@
                reg = <0x03860000 0x1000>;
        };
-        tmu@100C0000 {
+        tmu: tmu@100C0000 {
                compatible = "samsung,exynos4210-tmu";
                interrupt-parent = <&combiner>;
                reg = <0x100C0000 0x100>;
                interrupts = <2 4>;
                clocks = <&clock CLK_TMU_APBIF>;
                clock-names = "tmu_apbif";
+                samsung,tmu_gain = <15>;
+                samsung,tmu_reference_voltage = <7>;
                status = "disabled";
        };
+        thermal-zones {
+                cpu_thermal: cpu-thermal {
+                        polling-delay-passive = <0>;
+                        polling-delay = <0>;
+                        thermal-sensors = <&tmu 0>;
+                        trips {
+                              cpu_alert0: cpu-alert-0 {
+                                      temperature = <85000>; /* millicelsius */
+                              };
+                              cpu_alert1: cpu-alert-1 {
+                                      temperature = <100000>; /* millicelsius */
+                              };
+                              cpu_alert2: cpu-alert-2 {
+                                      temperature = <110000>; /* millicelsius */
+                              };
+                        };
+                };
+        };
        g2d@12800000 {
                compatible = "samsung,s5pv210-g2d";
                reg = <0x12800000 0x1000>;
@@ -203,6 +229,14 @@
                };
        };
+        mixer: mixer@12C10000 {
+                clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+                        "sclk_mixer";
+                clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+                        <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+                        <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+        };
        ppmu_lcd1: ppmu_lcd1@12240000 {
                compatible = "samsung,exynos-ppmu";
                reg = <0x12240000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index dd0a43ec56da..5be03288f1ee 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -26,10 +26,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
-                cpu@A00 {
+                cpu0: cpu@A00 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0xA00>;
+                        cooling-min-level = <13>;
+                        cooling-max-level = <7>;
+                        #cooling-cells = <2>; /* min followed by max */
                };
                cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index de80b5bba204..adb4f6a97a1d 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -249,6 +249,20 @@
                                        regulator-always-on;
                                };
+                                ldo8_reg: ldo@8 {
+                                        regulator-compatible = "LDO8";
+                                        regulator-name = "VDD10_HDMI_1.0V";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                };
+                                ldo10_reg: ldo@10 {
+                                        regulator-compatible = "LDO10";
+                                        regulator-name = "VDDQ_MIPIHSI_1.8V";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
                                ldo11_reg: LDO11 {
                                        regulator-name = "VDD18_ABB1_1.8V";
                                        regulator-min-microvolt = <1800000>;
@@ -411,6 +425,51 @@
        ehci: ehci@12580000 {
                status = "okay";
        };
+        tmu@100C0000 {
+                vtmu-supply = <&ldo10_reg>;
+                status = "okay";
+        };
+        thermal-zones {
+                cpu_thermal: cpu-thermal {
+                        cooling-maps {
+                                map0 {
+                                     /* Corresponds to 800MHz at freq_table */
+                                     cooling-device = <&cpu0 7 7>;
+                                };
+                                map1 {
+                                     /* Corresponds to 200MHz at freq_table */
+                                     cooling-device = <&cpu0 13 13>;
+                               };
+                       };
+                };
+        };
+        mixer: mixer@12C10000 {
+                status = "okay";
+        };
+        hdmi@12D00000 {
+                hpd-gpio = <&gpx3 7 0>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&hdmi_hpd>;
+                vdd-supply = <&ldo8_reg>;
+                vdd_osc-supply = <&ldo10_reg>;
+                vdd_pll-supply = <&ldo8_reg>;
+                ddc = <&hdmi_ddc>;
+                status = "okay";
+        };
+        hdmi_ddc: i2c@13880000 {
+                status = "okay";
+                pinctrl-names = "default";
+                pinctrl-0 = <&i2c2_bus>;
+        };
+        i2c@138E0000 {
+                status = "okay";
+        };
 };
 &pinctrl_1 {
@@ -425,4 +484,9 @@
                samsung,pin-pud = <0>;
                samsung,pin-drv = <0>;
        };
+        hdmi_hpd: hdmi-hpd {
+                samsung,pins = "gpx3-7";
+                samsung,pin-pud = <1>;
+        };
 };
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..e3f7934d19d0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos4412 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <dt-bindings/thermal/thermal_exynos.h>
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 21f748083586..173ffa479ad3 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -927,6 +927,21 @@
                pulldown-ohm = <100000>; /* 100K */
                io-channels = <&adc 2>;  /* Battery temperature */
        };
+        thermal-zones {
+                cpu_thermal: cpu-thermal {
+                        cooling-maps {
+                                map0 {
+                                     /* Corresponds to 800MHz at freq_table */
+                                     cooling-device = <&cpu0 7 7>;
+                                };
+                                map1 {
+                                     /* Corresponds to 200MHz at freq_table */
+                                     cooling-device = <&cpu0 13 13>;
+                               };
+                       };
+                };
+        };
 };
 &pmu_system_controller {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 0f6ec93bb1d8..68ad43b391ae 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -26,10 +26,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
-                cpu@A00 {
+                cpu0: cpu@A00 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0xA00>;
+                        cooling-min-level = <13>;
+                        cooling-max-level = <7>;
+                        #cooling-cells = <2>; /* min followed by max */
                };
                cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index f5e0ae780d6c..6a6abe14fd9b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -19,6 +19,7 @@
 #include "exynos4.dtsi"
 #include "exynos4x12-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 / {
        aliases {
@@ -297,4 +298,15 @@
                clock-names = "tmu_apbif";
                status = "disabled";
        };
+        hdmi: hdmi@12D00000 {
+                compatible = "samsung,exynos4212-hdmi";
+        };
+        mixer: mixer@12C10000 {
+                compatible = "samsung,exynos4212-mixer";
+                clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+                clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+                         <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+        };
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9bb1b0b738f5..adbde1adad95 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -20,7 +20,7 @@
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 / {
@@ -58,11 +58,14 @@
                #address-cells = <1>;
                #size-cells = <0>;
-                cpu@0 {
+                cpu0: cpu@0 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a15";
                        reg = <0>;
                        clock-frequency = <1700000000>;
+                        cooling-min-level = <15>;
+                        cooling-max-level = <9>;
+                        #cooling-cells = <2>; /* min followed by max */
                };
                cpu@1 {
                        device_type = "cpu";
@@ -102,6 +105,12 @@
                #power-domain-cells = <0>;
        };
+        pd_disp1: disp1-power-domain@100440A0 {
+                compatible = "samsung,exynos4210-pd";
+                reg = <0x100440A0 0x20>;
+                #power-domain-cells = <0>;
+        };
        clock: clock-controller@10010000 {
                compatible = "samsung,exynos5250-clock";
                reg = <0x10010000 0x30000>;
@@ -235,12 +244,32 @@
                status = "disabled";
        };
-        tmu@10060000 {
+        tmu: tmu@10060000 {
                compatible = "samsung,exynos5250-tmu";
                reg = <0x10060000 0x100>;
                interrupts = <0 65 0>;
                clocks = <&clock CLK_TMU>;
                clock-names = "tmu_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
+        };
+        thermal-zones {
+                cpu_thermal: cpu-thermal {
+                        polling-delay-passive = <0>;
+                        polling-delay = <0>;
+                        thermal-sensors = <&tmu 0>;
+                        cooling-maps {
+                                map0 {
+                                     /* Corresponds to 800MHz at freq_table */
+                                     cooling-device = <&cpu0 9 9>;
+                                };
+                                map1 {
+                                     /* Corresponds to 200MHz at freq_table */
+                                     cooling-device = <&cpu0 15 15>;
+                               };
+                       };
+                };
        };
        serial@12C00000 {
@@ -719,6 +748,7 @@
        hdmi: hdmi {
                compatible = "samsung,exynos4212-hdmi";
                reg = <0x14530000 0x70000>;
+                power-domains = <&pd_disp1>;
                interrupts = <0 95 0>;
                clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
                         <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@@ -731,9 +761,11 @@
        mixer {
                compatible = "samsung,exynos5250-mixer";
                reg = <0x14450000 0x10000>;
+                power-domains = <&pd_disp1>;
                interrupts = <0 94 0>;
-                clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+                clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-                clock-names = "mixer", "sclk_hdmi";
+                         <&clock CLK_SCLK_HDMI>;
+                clock-names = "mixer", "hdmi", "sclk_hdmi";
        };
        dp_phy: video-phy@10040720 {
@@ -743,6 +775,7 @@
        };
        dp: dp-controller@145B0000 {
+                power-domains = <&pd_disp1>;
                clocks = <&clock CLK_DP>;
                clock-names = "dp";
                phys = <&dp_phy>;
@@ -750,6 +783,7 @@
        };
        fimd: fimd@14400000 {
+                power-domains = <&pd_disp1>;
                clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
                clock-names = "sclk_fimd", "fimd";
        };
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
new file mode 100644
index 000000000000..5d31fc140823
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device tree sources for default Exynos5420 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+        cpu-alert-0 {
+                temperature = <85000>; /* millicelsius */
+                hysteresis = <10000>; /* millicelsius */
+                type = "active";
+        };
+        cpu-alert-1 {
+                temperature = <103000>; /* millicelsius */
+                hysteresis = <10000>; /* millicelsius */
+                type = "active";
+        };
+        cpu-alert-2 {
+                temperature = <110000>; /* millicelsius */
+                hysteresis = <10000>; /* millicelsius */
+                type = "active";
+        };
+        cpu-crit-0 {
+                temperature = <1200000>; /* millicelsius */
+                hysteresis = <0>; /* millicelsius */
+                type = "critical";
+        };
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 9dc2e9773b30..c0e98cf3514f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -740,8 +740,9 @@
                compatible = "samsung,exynos5420-mixer";
                reg = <0x14450000 0x10000>;
                interrupts = <0 94 0>;
-                clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+                clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-                clock-names = "mixer", "sclk_hdmi";
+                         <&clock CLK_SCLK_HDMI>;
+                clock-names = "mixer", "hdmi", "sclk_hdmi";
                power-domains = <&disp_pd>;
        };
@@ -782,6 +783,7 @@
                interrupts = <0 65 0>;
                clocks = <&clock CLK_TMU>;
                clock-names = "tmu_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
        };
        tmu_cpu1: tmu@10064000 {
@@ -790,6 +792,7 @@
                interrupts = <0 183 0>;
                clocks = <&clock CLK_TMU>;
                clock-names = "tmu_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
        };
        tmu_cpu2: tmu@10068000 {
@@ -798,6 +801,7 @@
                interrupts = <0 184 0>;
                clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
        };
        tmu_cpu3: tmu@1006c000 {
@@ -806,6 +810,7 @@
                interrupts = <0 185 0>;
                clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
        };
        tmu_gpu: tmu@100a0000 {
@@ -814,6 +819,30 @@
                interrupts = <0 215 0>;
                clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
                clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+                #include "exynos4412-tmu-sensor-conf.dtsi"
+        };
+        thermal-zones {
+                cpu0_thermal: cpu0-thermal {
+                        thermal-sensors = <&tmu_cpu0>;
+                        #include "exynos5420-trip-points.dtsi"
+                };
+                cpu1_thermal: cpu1-thermal {
+                       thermal-sensors = <&tmu_cpu1>;
+                       #include "exynos5420-trip-points.dtsi"
+                };
+                cpu2_thermal: cpu2-thermal {
+                       thermal-sensors = <&tmu_cpu2>;
+                       #include "exynos5420-trip-points.dtsi"
+                };
+                cpu3_thermal: cpu3-thermal {
+                       thermal-sensors = <&tmu_cpu3>;
+                       #include "exynos5420-trip-points.dtsi"
+                };
+                gpu_thermal: gpu-thermal {
+                       thermal-sensors = <&tmu_gpu>;
+                       #include "exynos5420-trip-points.dtsi"
+                };
        };
        watchdog: watchdog@101D0000 {
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..7b2fba0ae92b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos5440 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <dt-bindings/thermal/thermal_exynos.h>
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <5>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <0x5d2d>;
+samsung,tmu_min_efuse_value = <16>;
+samsung,tmu_max_efuse_value = <76>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <70>;
+samsung,tmu_default_temp_offset = <25>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
new file mode 100644
index 000000000000..48adfa8f4300
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for default Exynos5440 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+        cpu-alert-0 {
+                temperature = <100000>; /* millicelsius */
+                hysteresis = <0>; /* millicelsius */
+                type = "active";
+        };
+        cpu-crit-0 {
+                temperature = <1050000>; /* millicelsius */
+                hysteresis = <0>; /* millicelsius */
+                type = "critical";
+        };
+};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 8f3373cd7b87..59d9416b3b03 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -219,6 +219,7 @@
                interrupts = <0 58 0>;
                clocks = <&clock CLK_B_125>;
                clock-names = "tmu_apbif";
+                #include "exynos5440-tmu-sensor-conf.dtsi"
        };
        tmuctrl_1: tmuctrl@16011C {
@@ -227,6 +228,7 @@
                interrupts = <0 58 0>;
                clocks = <&clock CLK_B_125>;
                clock-names = "tmu_apbif";
+                #include "exynos5440-tmu-sensor-conf.dtsi"
        };
        tmuctrl_2: tmuctrl@160120 {
@@ -235,6 +237,22 @@
                interrupts = <0 58 0>;
                clocks = <&clock CLK_B_125>;
                clock-names = "tmu_apbif";
+                #include "exynos5440-tmu-sensor-conf.dtsi"
+        };
+        thermal-zones {
+                cpu0_thermal: cpu0-thermal {
+                        thermal-sensors = <&tmuctrl_0>;
+                        #include "exynos5440-trip-points.dtsi"
+                };
+                cpu1_thermal: cpu1-thermal {
+                       thermal-sensors = <&tmuctrl_1>;
+                       #include "exynos5440-trip-points.dtsi"
+                };
+                cpu2_thermal: cpu2-thermal {
+                       thermal-sensors = <&tmuctrl_2>;
+                       #include "exynos5440-trip-points.dtsi"
+                };
        };
        sata@210000 {
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f1cd2147421d..a626e6dd8022 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -35,6 +35,7 @@
                        regulator-max-microvolt = <5000000>;
                        gpio = <&gpio3 22 0>;
                        enable-active-high;
+                        vin-supply = <&swbst_reg>;
                };
                reg_usb_h1_vbus: regulator@1 {
@@ -45,6 +46,7 @@
                        regulator-max-microvolt = <5000000>;
                        gpio = <&gpio1 29 0>;
                        enable-active-high;
+                        vin-supply = <&swbst_reg>;
                };
                reg_audio: regulator@2 {
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index fda4932faefd..945887d3fdb3 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -52,6 +52,7 @@
                        regulator-max-microvolt = <5000000>;
                        gpio = <&gpio4 0 0>;
                        enable-active-high;
+                        vin-supply = <&swbst_reg>;
                };
                reg_usb_otg2_vbus: regulator@1 {
@@ -62,6 +63,7 @@
                        regulator-max-microvolt = <5000000>;
                        gpio = <&gpio4 2 0>;
                        enable-active-high;
+                        vin-supply = <&swbst_reg>;
                };
                reg_aud3v: regulator@2 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 0ab748cf7749..f5b5a1d96cd7 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -133,6 +133,16 @@
        non-removable;
        bus-width = <4>;
        cap-power-off-card;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio5>;
+                interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */
+                ref-clock-frequency = <38400000>;
+        };
 };
 &dss {
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 46eadb21b5ef..2294f5b0aa10 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -73,6 +73,16 @@
        non-removable;
        bus-width = <4>;
        cap-power-off-card;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio5>;
+                interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+                ref-clock-frequency = <38400000>;
+        };
 };
 &dss {
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 127f3e7c10c4..346552b94d9f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -106,6 +106,16 @@
        non-removable;
        bus-width = <4>;
        cap-power-off-card;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio5>;
+                interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+                ref-clock-frequency = <38400000>;
+        };
 };
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index cc8bd0cd8cf8..72f7cdc091fb 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -42,4 +42,13 @@
        vmmc-supply = <&lbep5clwmc_wlen>;
        bus-width = <4>;
        non-removable;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1835";
+                reg = <2>;
+                interrupt-parent = <&gpio6>;
+                interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */
+        };
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 9326b282c94a..b899e341874a 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -64,4 +64,13 @@
        vmmc-supply = <&lbep5clwmc_wlen>;
        bus-width = <4>;
        non-removable;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1835";
+                reg = <2>;
+                interrupt-parent = <&gpio5>;
+                interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+        };
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 6644f516a42b..131448d86e67 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -195,6 +195,16 @@
        cap-power-off-card;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio6>;
+                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */
+                ref-clock-frequency = <26000000>;
+        };
 };
 &uart1 {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 150513506c19..1228de5a05ed 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -450,6 +450,16 @@
        non-removable;
        bus-width = <4>;
        cap-power-off-card;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+                ref-clock-frequency = <38400000>;
+        };
 };
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43068f6..8c36f51f5780 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -487,6 +487,17 @@
        non-removable;
        bus-width = <4>;
        cap-power-off-card;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1281";
+                reg = <2>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+                ref-clock-frequency = <26000000>;
+                tcxo-clock-frequency = <26000000>;
+        };
 };
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index cc66af419236..9bceeb7e1f03 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -65,4 +65,14 @@
        bus-width = <4>;
        cap-power-off-card;
        status = "okay";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wlcore: wlcore@2 {
+                compatible = "ti,wl1271";
+                reg = <2>;
+                interrupt-parent = <&gpio2>;
+                interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+                ref-clock-frequency = <38400000>;
+        };
 };
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index 19212ac6eef0..de8a3d456cf7 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -13,7 +13,7 @@
 core_thermal: core_thermal {
        polling-delay-passive = <250>; /* milliseconds */
-        polling-delay = <1000>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
                        /* sensor       ID */
        thermal-sensors = <&bandgap     2>;
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index 1b87aca88b77..bc3090f2e84b 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -13,7 +13,7 @@
 gpu_thermal: gpu_thermal {
        polling-delay-passive = <250>; /* milliseconds */
-        polling-delay = <1000>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
                        /* sensor       ID */
        thermal-sensors = <&bandgap     1>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index ddff674bd05e..4a485b63a141 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1079,4 +1079,8 @@
        };
 };
+&cpu_thermal {
+        polling-delay = <500>; /* milliseconds */
+};
 /include/ "omap54xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 58c27466f012..83b425fb3ac2 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -167,10 +167,18 @@
                ti,index-starts-at-one;
        };
+        dpll_core_byp_mux: dpll_core_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+                ti,bit-shift = <23>;
+                reg = <0x012c>;
+        };
        dpll_core_ck: dpll_core_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-core-clock";
-                clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+                clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
                reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
        };
@@ -294,10 +302,18 @@
                clock-div = <1>;
        };
+        dpll_iva_byp_mux: dpll_iva_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x01ac>;
+        };
        dpll_iva_ck: dpll_iva_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+                clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
                reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
        };
@@ -599,10 +615,19 @@
        };
 };
 &cm_core_clocks {
+        dpll_per_byp_mux: dpll_per_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x014c>;
+        };
        dpll_per_ck: dpll_per_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-clock";
-                clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+                clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
                reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
        };
@@ -714,10 +739,18 @@
                ti,index-starts-at-one;
        };
+        dpll_usb_byp_mux: dpll_usb_byp_mux {
+                #clock-cells = <0>;
+                compatible = "ti,mux-clock";
+                clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+                ti,bit-shift = <23>;
+                reg = <0x018c>;
+        };
        dpll_usb_ck: dpll_usb_ck {
                #clock-cells = <0>;
                compatible = "ti,omap4-dpll-j-type-clock";
-                clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+                clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
                reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
        };
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7de02f104004..24e488826d34 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1449,7 +1449,7 @@
                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
                        reg = <0x00700000 0x100000>;
                        interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-                        clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+                        clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
                        clock-names = "usb_clk", "ehci_clk", "uhpck";
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 5cccbc98b267..82786027e814 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -264,7 +264,7 @@
                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
                        reg = <0x00600000 0x100000>;
                        interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-                        clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+                        clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
                        clock-names = "usb_clk", "ehci_clk", "uhpck";
                        status = "disabled";
                };
@@ -509,8 +509,8 @@
                                        lcdck: lcdck {
                                                #clock-cells = <0>;
-                                                reg = <4>;
+                                                reg = <3>;
-                                                clocks = <&smd>;
+                                                clocks = <&mck>;
                                        };
                                        smdck: smdck {
@@ -818,7 +818,7 @@
                                                reg = <50>;
                                        };
-                                        lcd_clk: lcd_clk {
+                                        lcdc_clk: lcdc_clk {
                                                #clock-cells = <0>;
                                                reg = <51>;
                                        };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 252c3d1bda50..9d8760956752 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -713,6 +713,9 @@
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                        dmas = <&pdma 28>,
+                               <&pdma 29>;
+                        dma-names = "tx", "rx";
                };
                uart1: serial1@ffc03000 {
@@ -722,6 +725,9 @@
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                        dmas = <&pdma 30>,
+                               <&pdma 31>;
+                        dma-names = "tx", "rx";
                };
                rst: rstmgr@ffd05000 {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b7e6b6fba5e0..06075b6d2463 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=16
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
 CONFIG_ARM_APPENDED_DTB=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a097cffa1231..8e108599e1af 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_OMAP_USB2=m
 CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 38840a812924..8f6a5702b696 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index f489fdaa19b8..37fe607a4ede 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_ISP1760=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 37ca2a4c6f09..bf0fe99e8ca9 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
        bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
-        VM_BUG_ON(size & PAGE_MASK);
+        VM_BUG_ON(size & ~PAGE_MASK);
        if (!need_flush && !icache_is_pipt())
                goto vipt_cache;
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 80a6501b4d50..c3c45e628e33 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -18,8 +18,11 @@
 #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
 #endif
-/* Keep in sync with mach-at91/include/mach/hardware.h */
+#ifdef CONFIG_MMU
 #define AT91_IO_P2V(x) ((x) - 0x01000000)
+#else
+#define AT91_IO_P2V(x) (x)
+#endif
 #define AT91_DBGU_SR            (0x14)  /* Status Register */
 #define AT91_DBGU_THR           (0x1c)  /* Transmitter Holding Register */
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 07e7eb1d7ab6..5560f74f9eee 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
                vcpu->mode = OUTSIDE_GUEST_MODE;
                kvm_guest_exit();
-                trace_kvm_exit(*vcpu_pc(vcpu));
+                trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
                /*
                 * We may have taken a host interrupt in HYP mode (ie
                 * while executing the guest). This interrupt is still
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
index 881874b1a036..6817664b46b8 100644
--- a/arch/arm/kvm/trace.h
+++ b/arch/arm/kvm/trace.h
@@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
 );
 TRACE_EVENT(kvm_exit,
-        TP_PROTO(unsigned long vcpu_pc),
+        TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
-        TP_ARGS(vcpu_pc),
+        TP_ARGS(exit_reason, vcpu_pc),
        TP_STRUCT__entry(
+                __field(        unsigned int,   exit_reason     )
                __field(        unsigned long,  vcpu_pc         )
        ),
        TP_fast_assign(
+                __entry->exit_reason            = exit_reason;
                __entry->vcpu_pc                = vcpu_pc;
        ),
-        TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+        TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+                  __entry->exit_reason,
+                  __entry->vcpu_pc)
 );
 TRACE_EVENT(kvm_guest_fault,
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index a2cc49f96f61..931f0e302c03 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -70,6 +70,8 @@ tmp2	.req	r5
        .text
+        .arm
 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
 *                      void __iomem *ramc1, int memctrl)
 */
@@ -205,6 +207,7 @@ sdr_sr_done:
        /* Turn off the main oscillator */
        ldr     tmp1, [pmc, #AT91_CKGR_MOR]
        bic     tmp1, tmp1, #AT91_PMC_MOSCEN
+        orr     tmp1, tmp1, #AT91_PMC_KEY
        str     tmp1, [pmc, #AT91_CKGR_MOR]
        /* Wait for interrupt */
@@ -213,6 +216,7 @@ sdr_sr_done:
        /* Turn on the main oscillator */
        ldr     tmp1, [pmc, #AT91_CKGR_MOR]
        orr     tmp1, tmp1, #AT91_PMC_MOSCEN
+        orr     tmp1, tmp1, #AT91_PMC_KEY
        str     tmp1, [pmc, #AT91_CKGR_MOR]
        wait_moscrdy
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index cd30f6f5f2ff..dd8f5312b2c0 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT
 endchoice
-config DA850_WL12XX
-        bool "AM18x wl1271 daughter board"
-        depends on MACH_DAVINCI_DA850_EVM
-        help
-          The wl1271 daughter card for AM18x EVMs is a combo wireless
-          connectivity add-on card, based on the LS Research TiWi module with
-          Texas Instruments' wl1271 solution.
-          Say Y if you want to use a wl1271 expansion card connected to the
-          AM18x EVM.
 config MACH_MITYOMAPL138
        bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
        depends on ARCH_DAVINCI_DA850
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6b5a97da9fe3..1ed545cc2b83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,7 +38,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#include <linux/wl12xx.h>
 #include <mach/common.h>
 #include <mach/cp_intc.h>
@@ -60,9 +59,6 @@
 #define DA850_MMCSD_CD_PIN              GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN              GPIO_TO_PIN(4, 1)
-#define DA850_WLAN_EN                   GPIO_TO_PIN(6, 9)
-#define DA850_WLAN_IRQ                  GPIO_TO_PIN(6, 10)
 #define DA850_MII_MDIO_CLKEN_PIN        GPIO_TO_PIN(2, 6)
 static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1343,109 +1339,6 @@ static __init void da850_vpif_init(void)
 static __init void da850_vpif_init(void) {}
 #endif
-#ifdef CONFIG_DA850_WL12XX
-static void wl12xx_set_power(int index, bool power_on)
-{
-        static bool power_state;
-        pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
-        if (power_on == power_state)
-                return;
-        power_state = power_on;
-        if (power_on) {
-                /* Power up sequence required for wl127x devices */
-                gpio_set_value(DA850_WLAN_EN, 1);
-                usleep_range(15000, 15000);
-                gpio_set_value(DA850_WLAN_EN, 0);
-                usleep_range(1000, 1000);
-                gpio_set_value(DA850_WLAN_EN, 1);
-                msleep(70);
-        } else {
-                gpio_set_value(DA850_WLAN_EN, 0);
-        }
-}
-static struct davinci_mmc_config da850_wl12xx_mmc_config = {
-        .set_power      = wl12xx_set_power,
-        .wires          = 4,
-        .max_freq       = 25000000,
-        .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
-                          MMC_CAP_POWER_OFF_CARD,
-};
-static const short da850_wl12xx_pins[] __initconst = {
-        DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
-        DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
-        DA850_GPIO6_9, DA850_GPIO6_10,
-        -1
-};
-static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
-        .irq                    = -1,
-        .board_ref_clock        = WL12XX_REFCLOCK_38,
-        .platform_quirks        = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
-};
-static __init int da850_wl12xx_init(void)
-{
-        int ret;
-        ret = davinci_cfg_reg_list(da850_wl12xx_pins);
-        if (ret) {
-                pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
-                goto exit;
-        }
-        ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
-        if (ret) {
-                pr_err("wl12xx/mmc registration failed: %d\n", ret);
-                goto exit;
-        }
-        ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
-        if (ret) {
-                pr_err("Could not request wl12xx enable gpio: %d\n", ret);
-                goto exit;
-        }
-        ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
-        if (ret) {
-                pr_err("Could not request wl12xx irq gpio: %d\n", ret);
-                goto free_wlan_en;
-        }
-        da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
-        ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
-        if (ret) {
-                pr_err("Could not set wl12xx data: %d\n", ret);
-                goto free_wlan_irq;
-        }
-        return 0;
-free_wlan_irq:
-        gpio_free(DA850_WLAN_IRQ);
-free_wlan_en:
-        gpio_free(DA850_WLAN_EN);
-exit:
-        return ret;
-}
-#else /* CONFIG_DA850_WL12XX */
-static __init int da850_wl12xx_init(void)
-{
-        return 0;
-}
-#endif /* CONFIG_DA850_WL12XX */
 #define DA850EVM_SATA_REFCLKPN_RATE     (100 * 1000 * 1000)
 static __init void da850_evm_init(void)
@@ -1502,11 +1395,6 @@ static __init void da850_evm_init(void)
                if (ret)
                        pr_warn("%s: MMCSD0 registration failed: %d\n",
                                __func__, ret);
-                ret = da850_wl12xx_init();
-                if (ret)
-                        pr_warn("%s: WL12xx initialization failed: %d\n",
-                                __func__, ret);
        }
        davinci_serial_init(da8xx_serial_device);
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 3f32c47a6d74..d2e9f12d12f1 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 */
 void exynos_cpu_power_down(int cpu)
 {
-        if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
+        if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
-                of_machine_is_compatible("samsung,exynos5800"))) {
                /*
                 * Bypass power down for CPU0 during suspend. Check for
                 * the SYS_PWR_REG value to decide if we are suspending
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 20f267121b3e..37266a826437 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -161,6 +161,34 @@ no_clk:
                of_genpd_add_provider_simple(np, &pd->pd);
        }
+        /* Assign the child power domains to their parents */
+        for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+                struct generic_pm_domain *child_domain, *parent_domain;
+                struct of_phandle_args args;
+                args.np = np;
+                args.args_count = 0;
+                child_domain = of_genpd_get_from_provider(&args);
+                if (!child_domain)
+                        continue;
+                if (of_parse_phandle_with_args(np, "power-domains",
+                                         "#power-domain-cells", 0, &args) != 0)
+                        continue;
+                parent_domain = of_genpd_get_from_provider(&args);
+                if (!parent_domain)
+                        continue;
+                if (pm_genpd_add_subdomain(parent_domain, child_domain))
+                        pr_warn("%s failed to add subdomain: %s\n",
+                                parent_domain->name, child_domain->name);
+                else
+                        pr_info("%s has as child subdomain: %s.\n",
+                                parent_domain->name, child_domain->name);
+                of_node_put(np);
+        }
        return 0;
 }
 arch_initcall(exynos4_pm_init_power_domain);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 52e2b1a2fddb..318d127df147 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
 static u32 exynos_irqwake_intmask = 0xffffffff;
 static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
-        { 73, BIT(1) }, /* RTC alarm */
+        { 105, BIT(1) }, /* RTC alarm */
-        { 74, BIT(2) }, /* RTC tick */
+        { 106, BIT(2) }, /* RTC tick */
        { /* sentinel */ },
 };
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4ad6e473cf83..9de3412af406 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
         * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
         * (external OSC), and we need to clear the bit.
         */
-        clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+        clksel = clk_is_match(ptp_clk, enet_ref) ?
-                                       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
+                                IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+                                IMX6Q_GPR1_ENET_CLK_SEL_PAD;
        gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
        if (!IS_ERR(gpr))
                regmap_update_bits(gpr, IOMUXC_GPR1,
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 61bfe584a9d7..fc832040c6e9 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/smc91x.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = {
        [1] = {
                .start  = MSM_GPIO_TO_INT(49),
                .end    = MSM_GPIO_TO_INT(49),
-                .flags  = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
        },
 };
+static struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 static struct platform_device smc91x_device = {
        .name           = "smc91x",
        .id             = 0,
        .num_resources  = ARRAY_SIZE(smc91x_resources),
        .resource       = smc91x_resources,
+        .dev.platform_data = &smc91x_platdata,
 };
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 4c748616ef47..10016a3bc698 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -22,6 +22,7 @@
 #include <linux/usb/msm_hsusb.h>
 #include <linux/err.h>
 #include <linux/clkdev.h>
+#include <linux/smc91x.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = {
                .flags = IORESOURCE_MEM,
        },
        [1] = {
-                .flags = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
        },
 };
+static struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 static struct platform_device smc91x_device = {
        .name           = "smc91x",
        .id             = 0,
        .num_resources  = ARRAY_SIZE(smc91x_resources),
        .resource       = smc91x_resources,
+        .dev.platform_data = &smc91x_platdata,
 };
 static int __init msm_init_smc91x(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 92afb723dcfc..355b08936871 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
        if (ret == -EBUSY)
                pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
-        if (!ret) {
+        if (oh->clkdm) {
                /*
                 * Set the clockdomain to HW_AUTO, assuming that the
                 * previous state was HW_AUTO.
                 */
-                if (oh->clkdm && hwsup)
+                if (hwsup)
                        clkdm_allow_idle(oh->clkdm);
-        } else {
-                if (oh->clkdm)
+                clkdm_hwmod_disable(oh->clkdm, oh);
-                        clkdm_hwmod_disable(oh->clkdm, oh);
        }
        return ret;
@@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
        INIT_LIST_HEAD(&oh->master_ports);
        INIT_LIST_HEAD(&oh->slave_ports);
        spin_lock_init(&oh->_lock);
+        lockdep_set_class(&oh->_lock, &oh->hwmod_key);
        oh->_state = _HWMOD_STATE_REGISTERED;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 9d4bec6ee742..9611c91d9b82 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -674,6 +674,7 @@ struct omap_hwmod {
        u32                             _sysc_cache;
        void __iomem                    *_mpu_rt_va;
        spinlock_t                      _lock;
+        struct lock_class_key           hwmod_key; /* unique lock class */
        struct list_head                node;
        struct omap_hwmod_ocp_if        *_mpu_port;
        unsigned int                    (*xlate_irq)(unsigned int);
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index e8692e7675b8..16fe7a1b7a35 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1466,55 +1466,18 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
 *
 */
-static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
        .name   = "pcie",
 };
 /* pcie1 */
-static struct omap_hwmod dra7xx_pcie1_hwmod = {
+static struct omap_hwmod dra7xx_pciess1_hwmod = {
        .name           = "pcie1",
-        .class          = &dra7xx_pcie_hwmod_class,
+        .class          = &dra7xx_pciess_hwmod_class,
        .clkdm_name     = "pcie_clkdm",
        .main_clk       = "l4_root_clk_div",
        .prcm = {
                .omap4 = {
-                        .clkctrl_offs   = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-                        .modulemode     = MODULEMODE_SWCTRL,
-                },
-        },
-};
-/* pcie2 */
-static struct omap_hwmod dra7xx_pcie2_hwmod = {
-        .name           = "pcie2",
-        .class          = &dra7xx_pcie_hwmod_class,
-        .clkdm_name     = "pcie_clkdm",
-        .main_clk       = "l4_root_clk_div",
-        .prcm = {
-                .omap4 = {
-                        .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-                        .modulemode   = MODULEMODE_SWCTRL,
-                },
-        },
-};
-/*
- * 'PCIE PHY' class
- *
- */
-static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
-        .name   = "pcie-phy",
-};
-/* pcie1 phy */
-static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
-        .name           = "pcie1-phy",
-        .class          = &dra7xx_pcie_phy_hwmod_class,
-        .clkdm_name     = "l3init_clkdm",
-        .main_clk       = "l4_root_clk_div",
-        .prcm = {
-                .omap4 = {
                        .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
                        .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
                        .modulemode   = MODULEMODE_SWCTRL,
@@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
        },
 };
-/* pcie2 phy */
+/* pcie2 */
-static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
+static struct omap_hwmod dra7xx_pciess2_hwmod = {
-        .name           = "pcie2-phy",
+        .name           = "pcie2",
-        .class          = &dra7xx_pcie_phy_hwmod_class,
+        .class          = &dra7xx_pciess_hwmod_class,
-        .clkdm_name     = "l3init_clkdm",
+        .clkdm_name     = "pcie_clkdm",
        .main_clk       = "l4_root_clk_div",
        .prcm = {
                .omap4 = {
@@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
-/* l3_main_1 -> pcie1 */
+/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
        .master         = &dra7xx_l3_main_1_hwmod,
-        .slave          = &dra7xx_pcie1_hwmod,
+        .slave          = &dra7xx_pciess1_hwmod,
        .clk            = "l3_iclk_div",
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
-/* l4_cfg -> pcie1 */
+/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
        .master         = &dra7xx_l4_cfg_hwmod,
-        .slave          = &dra7xx_pcie1_hwmod,
+        .slave          = &dra7xx_pciess1_hwmod,
        .clk            = "l4_root_clk_div",
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
-/* l3_main_1 -> pcie2 */
+/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
        .master         = &dra7xx_l3_main_1_hwmod,
-        .slave          = &dra7xx_pcie2_hwmod,
+        .slave          = &dra7xx_pciess2_hwmod,
        .clk            = "l3_iclk_div",
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
-/* l4_cfg -> pcie2 */
+/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
-        .master         = &dra7xx_l4_cfg_hwmod,
-        .slave          = &dra7xx_pcie2_hwmod,
-        .clk            = "l4_root_clk_div",
-        .user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-/* l4_cfg -> pcie1 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
-        .master         = &dra7xx_l4_cfg_hwmod,
-        .slave          = &dra7xx_pcie1_phy_hwmod,
-        .clk            = "l4_root_clk_div",
-        .user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-/* l4_cfg -> pcie2 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
        .master         = &dra7xx_l4_cfg_hwmod,
-        .slave          = &dra7xx_pcie2_phy_hwmod,
+        .slave          = &dra7xx_pciess2_hwmod,
        .clk            = "l4_root_clk_div",
        .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
        &dra7xx_l4_cfg__mpu,
        &dra7xx_l4_cfg__ocp2scp1,
        &dra7xx_l4_cfg__ocp2scp3,
-        &dra7xx_l3_main_1__pcie1,
+        &dra7xx_l3_main_1__pciess1,
-        &dra7xx_l4_cfg__pcie1,
+        &dra7xx_l4_cfg__pciess1,
-        &dra7xx_l3_main_1__pcie2,
+        &dra7xx_l3_main_1__pciess2,
-        &dra7xx_l4_cfg__pcie2,
+        &dra7xx_l4_cfg__pciess2,
-        &dra7xx_l4_cfg__pcie1_phy,
-        &dra7xx_l4_cfg__pcie2_phy,
        &dra7xx_l3_main_1__qspi,
        &dra7xx_l4_per3__rtcss,
        &dra7xx_l4_cfg__sata,
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 190fa43e7479..af11511dda50 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/ti_wilink_st.h>
-#include <linux/wl12xx.h>
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
@@ -35,34 +34,6 @@ struct pdata_init {
 struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
-#if IS_ENABLED(CONFIG_WL12XX)
-static struct wl12xx_platform_data wl12xx __initdata;
-static void __init __used legacy_init_wl12xx(unsigned ref_clock,
-                                             unsigned tcxo_clock,
-                                             int gpio)
-{
-        int res;
-        wl12xx.board_ref_clock = ref_clock;
-        wl12xx.board_tcxo_clock = tcxo_clock;
-        wl12xx.irq = gpio_to_irq(gpio);
-        res = wl12xx_set_platform_data(&wl12xx);
-        if (res) {
-                pr_err("error setting wl12xx data: %d\n", res);
-                return;
-        }
-}
-#else
-static inline void legacy_init_wl12xx(unsigned ref_clock,
-                                      unsigned tcxo_clock,
-                                      int gpio)
-{
-}
-#endif
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -129,7 +100,6 @@ static void __init omap3_sbc_t3730_twl_init(void)
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
        omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
 }
 static void __init omap3_sbc_t3530_legacy_init(void)
@@ -159,26 +129,19 @@ static struct platform_device btwilink_device = {
 static void __init omap3_igep0020_rev_f_legacy_init(void)
 {
-        legacy_init_wl12xx(0, 0, 177);
        platform_device_register(&wl18xx_device);
        platform_device_register(&btwilink_device);
 }
 static void __init omap3_igep0030_rev_g_legacy_init(void)
 {
-        legacy_init_wl12xx(0, 0, 136);
        platform_device_register(&wl18xx_device);
        platform_device_register(&btwilink_device);
 }
 static void __init omap3_evm_legacy_init(void)
 {
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
+        hsmmc2_internal_input_clk();
-}
-static void __init omap3_zoom_legacy_init(void)
-{
-        legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
 }
 static void am35xx_enable_emac_int(void)
@@ -245,7 +208,6 @@ static void __init omap3_sbc_t3517_legacy_init(void)
        am35xx_emac_reset();
        hsmmc2_internal_input_clk();
        omap3_sbc_t3517_wifi_init();
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
 }
 static void __init am3517_evm_legacy_init(void)
@@ -287,24 +249,6 @@ static void __init omap3_tao3530_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_ARCH_OMAP4
-static void __init omap4_sdp_legacy_init(void)
-{
-        legacy_init_wl12xx(WL12XX_REFCLOCK_26,
-                           WL12XX_TCXOCLOCK_26, 53);
-}
-static void __init omap4_panda_legacy_init(void)
-{
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
-}
-static void __init var_som_om44_legacy_init(void)
-{
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41);
-}
-#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 static struct iommu_platform_data omap4_iommu_pdata = {
        .reset_name = "mmu_cache",
@@ -313,13 +257,6 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
-#ifdef CONFIG_SOC_AM33XX
-static void __init am335x_evmsk_legacy_init(void)
-{
-        legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
-}
-#endif
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
@@ -420,19 +357,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
        { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
        { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
        { "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
-        { "ti,omap3-zoom3", omap3_zoom_legacy_init, },
        { "ti,am3517-evm", am3517_evm_legacy_init, },
        { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
 #endif
-#ifdef CONFIG_ARCH_OMAP4
-        { "ti,omap4-sdp", omap4_sdp_legacy_init, },
-        { "ti,omap4-panda", omap4_panda_legacy_init, },
-        { "variscite,var-dvk-om44", var_som_om44_legacy_init, },
-        { "variscite,var-stk-om44", var_som_om44_legacy_init, },
-#endif
-#ifdef CONFIG_SOC_AM33XX
-        { "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
-#endif
 #ifdef CONFIG_SOC_OMAP5
        { "ti,omap5-uevm", omap5_uevm_legacy_init, },
 #endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a08a617a6c11..d6d6bc39e05c 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
        saved_mask[0] =
                omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-                                        OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+                                        OMAP4_PRM_IRQENABLE_MPU_OFFSET);
        saved_mask[1] =
                omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-                                        OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+                                        OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
        omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
                                 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 343c4e3a7c5d..f6d02e4cbcda 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -36,6 +36,7 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
+#include <linux/smc91x.h>
 #include "generic.h"
 #include "devices.h"
@@ -81,11 +82,16 @@ static struct resource smc91x_resources[] = {
        }
 };
+static struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+};
 static struct platform_device smc91x_device = {
        .name           = "smc91x",
        .id             = 0,
        .num_resources  = ARRAY_SIZE(smc91x_resources),
        .resource       = smc91x_resources,
+        .dev.platform_data = &smc91x_platdata,
 };
 static void idp_backlight_power(int on)
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ad777b353bd5..eaee2c20b189 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = {
        [1] = {
                .start  = LPD270_ETHERNET_IRQ,
                .end    = LPD270_ETHERNET_IRQ,
-                .flags  = IORESOURCE_IRQ,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
+struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 static struct platform_device smc91x_device = {
        .name           = "smc91x",
        .id             = 0,
        .num_resources  = ARRAY_SIZE(smc91x_resources),
        .resource       = smc91x_resources,
+        .dev.platform_data = &smc91x_platdata,
 };
 static struct resource lpd270_flash_resources[] = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 850e506926df..c309593abdb2 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -28,6 +28,7 @@
 #include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/smc91x.h>
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
@@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = {
        .phy_interface  = PHY_INTERFACE_MODE_MII,
 };
+static struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+};
 static struct platform_device realview_eth_device = {
        .name           = "smsc911x",
        .id             = 0,
@@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res)
        realview_eth_device.resource = res;
        if (strcmp(realview_eth_device.name, "smsc911x") == 0)
                realview_eth_device.dev.platform_data = &smsc911x_config;
+        else
+                realview_eth_device.dev.platform_data = &smc91x_platdata;
        return platform_device_register(&realview_eth_device);
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 64c88d657f9e..b3869cbbcc68 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -234,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = {
        [1] = {
                .start          = IRQ_EB_ETH,
                .end            = IRQ_EB_ETH,
-                .flags          = IORESOURCE_IRQ,
+                .flags          = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
        },
 };
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 169262e3040d..af868d258e66 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -12,6 +12,7 @@
 #include <linux/pm.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
+#include <linux/smc91x.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev)
                        0x02000000, "smc91x-attrib"),
                { .flags = IORESOURCE_IRQ },
        };
+        struct smc91x_platdata smc91x_platdata = {
+                .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT,
+        };
        struct platform_device_info smc91x_devinfo = {
                .parent = &dev->dev,
                .name = "smc91x",
                .id = 0,
                .res = smc91x_resources,
                .num_res = ARRAY_SIZE(smc91x_resources),
+                .data = &smc91x_platdata,
+                .size_data = sizeof(smc91x_platdata),
        };
        int ret, irq;
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 091261878eff..1525d7b5f1b7 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = {
 #endif
 };
+static struct smc91x_platdata smc91x_platdata = {
+        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
 static struct platform_device smc91x_device = {
        .name           = "smc91x",
        .id             = 0,
        .num_resources  = ARRAY_SIZE(smc91x_resources),
        .resource       = smc91x_resources,
+        .dev = {
+                .platform_data  = &smc91x_platdata,
+        },
 };
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 483cb467bf65..a0f3b1cd497c 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end;
 extern unsigned long socfpga_cpu1start_addr;
-#define SOCFPGA_SCU_VIRT_BASE   0xfffec000
+#define SOCFPGA_SCU_VIRT_BASE   0xfee00000
 #endif
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 383d61e138af..f5e597c207b9 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -23,6 +23,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/cacheflush.h>
 #include "core.h"
@@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void)
                        (u32 *) &socfpga_cpu1start_addr))
                pr_err("SMP: Need cpu1-start-addr in device tree.\n");
+        /* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
+        smp_wmb();
+        sync_cache_w(&socfpga_cpu1start_addr);
        sys_manager_base_addr = of_iomap(np, 0);
        np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index b067390cef4e..b373acade338 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = {
        "st,stih415",
        "st,stih416",
        "st,stih407",
+        "st,stih410",
        "st,stih418",
        NULL
 };