1 files changed, 20 insertions, 60 deletions

diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2581b4..d246efd9f734 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -25,7 +25,6 @@
 #include <linux/spi/ads7846.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -64,30 +63,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
         struct spi_board_info *spi_bi = &ads7846_spi_board_info;
         int err;
 
-        err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-        if (err) {
-                pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-                return;
-        }
+        /*
+         * If a board defines get_pendown_state() function, request the pendown
+         * GPIO and set the GPIO debounce time.
+         * If a board does not define the get_pendown_state() function, then
+         * the ads7846 driver will setup the pendown GPIO itself.
+         */
+        if (board_pdata && board_pdata->get_pendown_state) {
+                err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+                if (err) {
+                        pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+                        return;
+                }
+
+                if (gpio_debounce)
+                        gpio_set_debounce(gpio_pendown, gpio_debounce);
 
-        if (gpio_debounce)
-                gpio_set_debounce(gpio_pendown, gpio_debounce);
+                gpio_export(gpio_pendown, 0);
+        }
 
         spi_bi->bus_num = bus_num;
         spi_bi->irq     = gpio_to_irq(gpio_pendown);
 
+        ads7846_config.gpio_pendown = gpio_pendown;
+
         if (board_pdata) {
                 board_pdata->gpio_pendown = gpio_pendown;
+                board_pdata->gpio_pendown_debounce = gpio_debounce;
                 spi_bi->platform_data = board_pdata;
-                if (board_pdata->get_pendown_state)
-                        gpio_export(gpio_pendown, 0);
-        } else {
-                ads7846_config.gpio_pendown = gpio_pendown;
         }
 
-        if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-                gpio_free(gpio_pendown);
-
         spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else
@@ -96,48 +101,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-
-        if (nandcs > GPMC_CS_NUM) {
-                pr_info("NAND: Unable to find configuration in GPMC\n");
-                return;
-        }
-
-        if (nandcs < GPMC_CS_NUM) {
-                nand_data.cs = nandcs;
-                nand_data.parts = parts;
-                nand_data.nr_parts = nr_parts;
-                nand_data.devsize = options;
-
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-                                 int nr_parts)
-{
-}
-#endif