diff options
-rw-r--r-- | Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt new file mode 100644 index 000000000000..7a9e8603c150 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt | |||
@@ -0,0 +1,209 @@ | |||
1 | * Rockchip rk3399 DMC(Dynamic Memory Controller) device | ||
2 | |||
3 | Required properties: | ||
4 | - compatible: Must be "rockchip,rk3399-dmc". | ||
5 | - devfreq-events: Node to get DDR loading, Refer to | ||
6 | Documentation/devicetree/bindings/devfreq/ | ||
7 | rockchip-dfi.txt | ||
8 | - interrupts: The interrupt number to the CPU. The interrupt | ||
9 | specifier format depends on the interrupt controller. | ||
10 | It should be DCF interrupts, when DDR dvfs finish, | ||
11 | it will happen. | ||
12 | - clocks: Phandles for clock specified in "clock-names" property | ||
13 | - clock-names : The name of clock used by the DFI, must be | ||
14 | "pclk_ddr_mon"; | ||
15 | - operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt | ||
16 | for details. | ||
17 | - center-supply: DMC supply node. | ||
18 | - status: Marks the node enabled/disabled. | ||
19 | |||
20 | Following properties are ddr timing: | ||
21 | |||
22 | - rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/ddr.h, | ||
23 | it select ddr3 cl-trp-trcd type, default value | ||
24 | "DDR3_DEFAULT".it must selected according to | ||
25 | "Speed Bin" in ddr3 datasheet, DO NOT use | ||
26 | smaller "Speed Bin" than ddr3 exactly is. | ||
27 | |||
28 | - rockchip,pd_idle : Config the PD_IDLE value, defined the power-down | ||
29 | idle period, memories are places into power-down | ||
30 | mode if bus is idle for PD_IDLE DFI clocks. | ||
31 | |||
32 | - rockchip,sr_idle : Configure the SR_IDLE value, defined the | ||
33 | selfrefresh idle period, memories are places | ||
34 | into self-refresh mode if bus is idle for | ||
35 | SR_IDLE*1024 DFI clocks (DFI clocks freq is | ||
36 | half of dram's clocks), defaule value is "0". | ||
37 | |||
38 | - rockchip,sr_mc_gate_idle : Defined the self-refresh with memory and | ||
39 | controller clock gating idle period, memories | ||
40 | are places into self-refresh mode and memory | ||
41 | controller clock arg gating if bus is idle for | ||
42 | sr_mc_gate_idle*1024 DFI clocks. | ||
43 | |||
44 | - rockchip,srpd_lite_idle : Defined the self-refresh power down idle | ||
45 | period, memories are places into self-refresh | ||
46 | power down mode if bus is idle for | ||
47 | srpd_lite_idle*1024 DFI clocks. This parameter | ||
48 | is for LPDDR4 only. | ||
49 | |||
50 | - rockchip,standby_idle : Defined the standby idle period, memories are | ||
51 | places into self-refresh than controller, pi, | ||
52 | phy and dram clock will gating if bus is idle | ||
53 | for standby_idle * DFI clocks. | ||
54 | |||
55 | - rockchip,dram_dll_disb_freq : It's defined the DDR3 dll bypass frequency in | ||
56 | MHz, when ddr freq less than DRAM_DLL_DISB_FREQ, | ||
57 | ddr3 dll will bypssed note: if dll was bypassed, | ||
58 | the odt also stop working. | ||
59 | |||
60 | - rockchip,phy_dll_disb_freq : Defined the PHY dll bypass frequency in | ||
61 | MHz (Mega Hz), when ddr freq less than | ||
62 | DRAM_DLL_DISB_FREQ, phy dll will bypssed. | ||
63 | note: phy dll and phy odt are independent. | ||
64 | |||
65 | - rockchip,ddr3_odt_disb_freq : When dram type is DDR3, this parameter defined | ||
66 | the odt disable frequency in MHz (Mega Hz), | ||
67 | when ddr frequency less then ddr3_odt_disb_freq, | ||
68 | the odt on dram side and controller side are | ||
69 | both disabled. | ||
70 | |||
71 | - rockchip,ddr3_drv : When dram type is DDR3, this parameter define | ||
72 | the dram side driver stength in ohm, default | ||
73 | value is DDR3_DS_40ohm. | ||
74 | |||
75 | - rockchip,ddr3_odt : When dram type is DDR3, this parameter define | ||
76 | the dram side ODT stength in ohm, default value | ||
77 | is DDR3_ODT_120ohm. | ||
78 | |||
79 | - rockchip,phy_ddr3_ca_drv : When dram type is DDR3, this parameter define | ||
80 | the phy side CA line(incluing command line, | ||
81 | address line and clock line) driver strength. | ||
82 | Default value is PHY_DRV_ODT_40. | ||
83 | |||
84 | - rockchip,phy_ddr3_dq_drv : When dram type is DDR3, this parameter define | ||
85 | the phy side DQ line(incluing DQS/DQ/DM line) | ||
86 | driver strength. default value is PHY_DRV_ODT_40. | ||
87 | |||
88 | - rockchip,phy_ddr3_odt : When dram type is DDR3, this parameter define the | ||
89 | phy side odt strength, default value is | ||
90 | PHY_DRV_ODT_240. | ||
91 | |||
92 | - rockchip,lpddr3_odt_disb_freq : When dram type is LPDDR3, this parameter defined | ||
93 | then odt disable frequency in MHz (Mega Hz), | ||
94 | when ddr frequency less then ddr3_odt_disb_freq, | ||
95 | the odt on dram side and controller side are | ||
96 | both disabled. | ||
97 | |||
98 | - rockchip,lpddr3_drv : When dram type is LPDDR3, this parameter define | ||
99 | the dram side driver stength in ohm, default | ||
100 | value is LP3_DS_34ohm. | ||
101 | |||
102 | - rockchip,lpddr3_odt : When dram type is LPDDR3, this parameter define | ||
103 | the dram side ODT stength in ohm, default value | ||
104 | is LP3_ODT_240ohm. | ||
105 | |||
106 | - rockchip,phy_lpddr3_ca_drv : When dram type is LPDDR3, this parameter define | ||
107 | the phy side CA line(incluing command line, | ||
108 | address line and clock line) driver strength. | ||
109 | default value is PHY_DRV_ODT_40. | ||
110 | |||
111 | - rockchip,phy_lpddr3_dq_drv : When dram type is LPDDR3, this parameter define | ||
112 | the phy side DQ line(incluing DQS/DQ/DM line) | ||
113 | driver strength. default value is | ||
114 | PHY_DRV_ODT_40. | ||
115 | |||
116 | - rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define | ||
117 | the phy side odt strength, default value is | ||
118 | PHY_DRV_ODT_240. | ||
119 | |||
120 | - rockchip,lpddr4_odt_disb_freq : When dram type is LPDDR4, this parameter | ||
121 | defined the odt disable frequency in | ||
122 | MHz (Mega Hz), when ddr frequency less then | ||
123 | ddr3_odt_disb_freq, the odt on dram side and | ||
124 | controller side are both disabled. | ||
125 | |||
126 | - rockchip,lpddr4_drv : When dram type is LPDDR4, this parameter define | ||
127 | the dram side driver stength in ohm, default | ||
128 | value is LP4_PDDS_60ohm. | ||
129 | |||
130 | - rockchip,lpddr4_dq_odt : When dram type is LPDDR4, this parameter define | ||
131 | the dram side ODT on dqs/dq line stength in ohm, | ||
132 | default value is LP4_DQ_ODT_40ohm. | ||
133 | |||
134 | - rockchip,lpddr4_ca_odt : When dram type is LPDDR4, this parameter define | ||
135 | the dram side ODT on ca line stength in ohm, | ||
136 | default value is LP4_CA_ODT_40ohm. | ||
137 | |||
138 | - rockchip,phy_lpddr4_ca_drv : When dram type is LPDDR4, this parameter define | ||
139 | the phy side CA line(incluing command address | ||
140 | line) driver strength. default value is | ||
141 | PHY_DRV_ODT_40. | ||
142 | |||
143 | - rockchip,phy_lpddr4_ck_cs_drv : When dram type is LPDDR4, this parameter define | ||
144 | the phy side clock line and cs line driver | ||
145 | strength. default value is PHY_DRV_ODT_80. | ||
146 | |||
147 | - rockchip,phy_lpddr4_dq_drv : When dram type is LPDDR4, this parameter define | ||
148 | the phy side DQ line(incluing DQS/DQ/DM line) | ||
149 | driver strength. default value is PHY_DRV_ODT_80. | ||
150 | |||
151 | - rockchip,phy_lpddr4_odt : When dram type is LPDDR4, this parameter define | ||
152 | the phy side odt strength, default value is | ||
153 | PHY_DRV_ODT_60. | ||
154 | |||
155 | Example: | ||
156 | dmc_opp_table: dmc_opp_table { | ||
157 | compatible = "operating-points-v2"; | ||
158 | |||
159 | opp00 { | ||
160 | opp-hz = /bits/ 64 <300000000>; | ||
161 | opp-microvolt = <900000>; | ||
162 | }; | ||
163 | opp01 { | ||
164 | opp-hz = /bits/ 64 <666000000>; | ||
165 | opp-microvolt = <900000>; | ||
166 | }; | ||
167 | }; | ||
168 | |||
169 | dmc: dmc { | ||
170 | compatible = "rockchip,rk3399-dmc"; | ||
171 | devfreq-events = <&dfi>; | ||
172 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; | ||
173 | clocks = <&cru SCLK_DDRCLK>; | ||
174 | clock-names = "dmc_clk"; | ||
175 | operating-points-v2 = <&dmc_opp_table>; | ||
176 | center-supply = <&ppvar_centerlogic>; | ||
177 | upthreshold = <15>; | ||
178 | downdifferential = <10>; | ||
179 | rockchip,ddr3_speed_bin = <21>; | ||
180 | rockchip,pd_idle = <0x40>; | ||
181 | rockchip,sr_idle = <0x2>; | ||
182 | rockchip,sr_mc_gate_idle = <0x3>; | ||
183 | rockchip,srpd_lite_idle = <0x4>; | ||
184 | rockchip,standby_idle = <0x2000>; | ||
185 | rockchip,dram_dll_dis_freq = <300>; | ||
186 | rockchip,phy_dll_dis_freq = <125>; | ||
187 | rockchip,auto_pd_dis_freq = <666>; | ||
188 | rockchip,ddr3_odt_dis_freq = <333>; | ||
189 | rockchip,ddr3_drv = <DDR3_DS_40ohm>; | ||
190 | rockchip,ddr3_odt = <DDR3_ODT_120ohm>; | ||
191 | rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>; | ||
192 | rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>; | ||
193 | rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>; | ||
194 | rockchip,lpddr3_odt_dis_freq = <333>; | ||
195 | rockchip,lpddr3_drv = <LP3_DS_34ohm>; | ||
196 | rockchip,lpddr3_odt = <LP3_ODT_240ohm>; | ||
197 | rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>; | ||
198 | rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>; | ||
199 | rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>; | ||
200 | rockchip,lpddr4_odt_dis_freq = <333>; | ||
201 | rockchip,lpddr4_drv = <LP4_PDDS_60ohm>; | ||
202 | rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>; | ||
203 | rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>; | ||
204 | rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>; | ||
205 | rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; | ||
206 | rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; | ||
207 | rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; | ||
208 | status = "disabled"; | ||
209 | }; | ||