1 files changed, 62 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
new file mode 100644
index 000000000000..3ca56fdb5ffe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -0,0 +1,62 @@
+* ROHM BD71837 Power Management Integrated Circuit bindings
+
+BD71837MWV is a programmable Power Management IC for powering single-core,
+dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for
+low BOM cost and compact solution footprint. It integrates 8 Buck
+egulators and 7 LDOs to provide all the power rails required by the SoC and
+the commonly used peripherals.
+
+Datasheet for PMIC is available at:
+https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
+
+Required properties:
+ - compatible           : Should be "rohm,bd71837".
+ - reg                  : I2C slave address.
+ - interrupt-parent     : Phandle to the parent interrupt controller.
+ - interrupts           : The interrupt line the device is connected to.
+ - clocks               : The parent clock connected to PMIC. If this is missing
+                          32768 KHz clock is assumed.
+ - #clock-cells         : Should be 0.
+ - regulators:          : List of child nodes that specify the regulators.
+                          Please see ../regulator/rohm,bd71837-regulator.txt
+
+Optional properties:
+- clock-output-names    : Should contain name for output clock.
+
+Example:
+
+        /* external oscillator node */
+        osc: oscillator {
+                compatible = "fixed-clock";
+                #clock-cells = <1>;
+                clock-frequency  = <32768>;
+                clock-output-names = "osc";
+        };
+
+        pmic: pmic@4b {
+                compatible = "rohm,bd71837";
+                reg = <0x4b>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <29 GPIO_ACTIVE_LOW>;
+                interrupt-names = "irq";
+                #clock-cells = <0>;
+                clocks = <&osc 0>;
+                clock-output-names = "bd71837-32k-out";
+
+                regulators {
+                        buck1: BUCK1 {
+                                regulator-name = "buck1";
+                                regulator-min-microvolt = <700000>;
+                                regulator-max-microvolt = <1300000>;
+                                regulator-boot-on;
+                                regulator-ramp-delay = <1250>;
+                        };
+                };
+        };
+
+        /* Clock consumer node */
+        rtc@0 {
+                compatible = "company,my-rtc";
+                clock-names = "my-clock";
+                clocks = <&pmic>;
+        };