aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts272
1 files changed, 136 insertions, 136 deletions
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 89e38e9e0be6..edfb5b37939e 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -49,182 +49,182 @@
49#include <dt-bindings/interrupt-controller/arm-gic.h> 49#include <dt-bindings/interrupt-controller/arm-gic.h>
50 50
51/ { 51/ {
52 model = "Banana Pi BPI-M1-Plus"; 52 model = "Banana Pi BPI-M1-Plus";
53 compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20"; 53 compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
54 54
55 aliases { 55 aliases {
56 serial0 = &uart0; 56 serial0 = &uart0;
57 }; 57 };
58 58
59 chosen { 59 chosen {
60 stdout-path = "serial0:115200n8"; 60 stdout-path = "serial0:115200n8";
61 }; 61 };
62 62
63 leds { 63 leds {
64 compatible = "gpio-leds"; 64 compatible = "gpio-leds";
65 pinctrl-names = "default"; 65 pinctrl-names = "default";
66 pinctrl-0 = <&led_pins_bananapi>; 66 pinctrl-0 = <&led_pins_bananapi>;
67 67
68 green { 68 green {
69 label = "bananapi-m1-plus:green:usr"; 69 label = "bananapi-m1-plus:green:usr";
70 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; 70 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
71 }; 71 };
72 72
73 red { 73 red {
74 label = "bananapi-m1-plus:red:usr"; 74 label = "bananapi-m1-plus:red:usr";
75 gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; 75 gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
76 linux,default-trigger = "default-on"; 76 linux,default-trigger = "default-on";
77 }; 77 };
78 78
79 }; 79 };
80 80
81 mmc3_pwrseq: mmc3_pwrseq { 81 mmc3_pwrseq: mmc3_pwrseq {
82 compatible = "mmc-pwrseq-simple"; 82 compatible = "mmc-pwrseq-simple";
83 pinctrl-names = "default"; 83 pinctrl-names = "default";
84 pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>; 84 pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
85 reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ 85 reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
86 }; 86 };
87 87
88 reg_gmac_3v3: gmac-3v3 { 88 reg_gmac_3v3: gmac-3v3 {
89 compatible = "regulator-fixed"; 89 compatible = "regulator-fixed";
90 pinctrl-names = "default"; 90 pinctrl-names = "default";
91 pinctrl-0 = <&gmac_power_pin_bananapi>; 91 pinctrl-0 = <&gmac_power_pin_bananapi>;
92 regulator-name = "gmac-3v3"; 92 regulator-name = "gmac-3v3";
93 regulator-min-microvolt = <3300000>; 93 regulator-min-microvolt = <3300000>;
94 regulator-max-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>;
95 startup-delay-us = <100000>; 95 startup-delay-us = <100000>;
96 enable-active-high; 96 enable-active-high;
97 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; 97 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
98 }; 98 };
99}; 99};
100 100
101&ahci { 101&ahci {
102 status = "okay"; 102 status = "okay";
103}; 103};
104 104
105&codec { 105&codec {
106 status = "okay"; 106 status = "okay";
107}; 107};
108 108
109&ehci0 { 109&ehci0 {
110 status = "okay"; 110 status = "okay";
111}; 111};
112 112
113&ehci1 { 113&ehci1 {
114 status = "okay"; 114 status = "okay";
115}; 115};
116 116
117&gmac { 117&gmac {
118 pinctrl-names = "default"; 118 pinctrl-names = "default";
119 pinctrl-0 = <&gmac_pins_rgmii_a>; 119 pinctrl-0 = <&gmac_pins_rgmii_a>;
120 phy = <&phy1>; 120 phy = <&phy1>;
121 phy-mode = "rgmii"; 121 phy-mode = "rgmii";
122 phy-supply = <&reg_gmac_3v3>; 122 phy-supply = <&reg_gmac_3v3>;
123 status = "okay"; 123 status = "okay";
124 124
125 phy1: ethernet-phy@1 { 125 phy1: ethernet-phy@1 {
126 reg = <1>; 126 reg = <1>;
127 }; 127 };
128}; 128};
129 129
130&i2c0 { 130&i2c0 {
131 pinctrl-names = "default"; 131 pinctrl-names = "default";
132 pinctrl-0 = <&i2c0_pins_a>; 132 pinctrl-0 = <&i2c0_pins_a>;
133 status = "okay"; 133 status = "okay";
134 134
135 axp209: pmic@34 { 135 axp209: pmic@34 {
136 compatible = "x-powers,axp209"; 136 compatible = "x-powers,axp209";
137 reg = <0x34>; 137 reg = <0x34>;
138 interrupt-parent = <&nmi_intc>; 138 interrupt-parent = <&nmi_intc>;
139 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 139 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
140 140
141 interrupt-controller; 141 interrupt-controller;
142 #interrupt-cells = <1>; 142 #interrupt-cells = <1>;
143 }; 143 };
144}; 144};
145 145
146&ir0 { 146&ir0 {
147 pinctrl-names = "default"; 147 pinctrl-names = "default";
148 pinctrl-0 = <&ir0_rx_pins_a>; 148 pinctrl-0 = <&ir0_rx_pins_a>;
149 status = "okay"; 149 status = "okay";
150}; 150};
151 151
152&mmc0 { 152&mmc0 {
153 pinctrl-names = "default"; 153 pinctrl-names = "default";
154 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; 154 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
155 vmmc-supply = <&reg_vcc3v3>; 155 vmmc-supply = <&reg_vcc3v3>;
156 bus-width = <4>; 156 bus-width = <4>;
157 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ 157 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
158 cd-inverted; 158 cd-inverted;
159 status = "okay"; 159 status = "okay";
160}; 160};
161 161
162&mmc3 { 162&mmc3 {
163 #address-cells = <1>; 163 #address-cells = <1>;
164 #size-cells = <0>; 164 #size-cells = <0>;
165 pinctrl-names = "default"; 165 pinctrl-names = "default";
166 pinctrl-0 = <&mmc3_pins_a>; 166 pinctrl-0 = <&mmc3_pins_a>;
167 vmmc-supply = <&reg_vcc3v3>; 167 vmmc-supply = <&reg_vcc3v3>;
168 mmc-pwrseq = <&mmc3_pwrseq>; 168 mmc-pwrseq = <&mmc3_pwrseq>;
169 bus-width = <4>; 169 bus-width = <4>;
170 non-removable; 170 non-removable;
171 enable-sdio-wakeup; 171 enable-sdio-wakeup;
172 status = "okay"; 172 status = "okay";
173 173
174 brcmf: bcrmf@1 { 174 brcmf: bcrmf@1 {
175 reg = <1>; 175 reg = <1>;
176 compatible = "brcm,bcm4329-fmac"; 176 compatible = "brcm,bcm4329-fmac";
177 interrupt-parent = <&pio>; 177 interrupt-parent = <&pio>;
178 interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; 178 interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
179 interrupt-names = "host-wake"; 179 interrupt-names = "host-wake";
180 }; 180 };
181}; 181};
182 182
183&mmc3_pins_a { 183&mmc3_pins_a {
184 /* AP6210 requires pull-up */ 184 /* AP6210 requires pull-up */
185 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 185 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
186}; 186};
187 187
188&ohci0 { 188&ohci0 {
189 status = "okay"; 189 status = "okay";
190}; 190};
191 191
192&ohci1 { 192&ohci1 {
193 status = "okay"; 193 status = "okay";
194}; 194};
195 195
196&pio { 196&pio {
197 gmac_power_pin_bananapi: gmac_power_pin@0 { 197 gmac_power_pin_bananapi: gmac_power_pin@0 {
198 allwinner,pins = "PH23"; 198 allwinner,pins = "PH23";
199 allwinner,function = "gpio_out"; 199 allwinner,function = "gpio_out";
200 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 200 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
201 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 201 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
202 }; 202 };
203 203
204 led_pins_bananapi: led_pins@0 { 204 led_pins_bananapi: led_pins@0 {
205 allwinner,pins = "PH24", "PG2"; 205 allwinner,pins = "PH24", "PG2";
206 allwinner,function = "gpio_out"; 206 allwinner,function = "gpio_out";
207 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 207 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
208 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 208 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
209 }; 209 };
210 210
211 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { 211 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
212 allwinner,pins = "PH10"; 212 allwinner,pins = "PH10";
213 allwinner,function = "gpio_in"; 213 allwinner,function = "gpio_in";
214 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 214 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
215 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 215 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
216 }; 216 };
217 217
218 mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 { 218 mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
219 allwinner,pins = "PH22"; 219 allwinner,pins = "PH22";
220 allwinner,function = "gpio_out"; 220 allwinner,function = "gpio_out";
221 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 221 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
222 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 222 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
223 }; 223 };
224}; 224};
225 225
226&uart0 { 226&uart0 {
227 pinctrl-names = "default"; 227 pinctrl-names = "default";
228 pinctrl-0 = <&uart0_pins_a>; 228 pinctrl-0 = <&uart0_pins_a>;
229 status = "okay"; 229 status = "okay";
230}; 230};
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-30 23:15:36 -0400