2 files changed, 204 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c5e1d944d1c..6be297427c11 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -999,6 +999,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
         armada-385-db-ap.dtb \
         armada-385-linksys-caiman.dtb \
         armada-385-linksys-cobra.dtb \
+        armada-385-linksys-rango.dtb \
         armada-385-linksys-shelby.dtb \
         armada-385-synology-ds116.dtb \
         armada-385-turris-omnia.dtb \
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
new file mode 100644
index 000000000000..da8a0f3d432b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -0,0 +1,203 @@
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+        model = "Linksys WRT3200ACM";
+        compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+                     "marvell,armada380";
+};
+
+&expander0 {
+        wan_amber@0 {
+                label = "rango:amber:wan";
+                reg = <0x0>;
+        };
+
+        wan_white@1 {
+                label = "rango:white:wan";
+                reg = <0x1>;
+        };
+
+        usb2@5 {
+                label = "rango:white:usb2";
+                reg = <0x5>;
+        };
+
+        usb3_1@6 {
+                label = "rango:white:usb3_1";
+                reg = <0x6>;
+        };
+
+        usb3_2@7 {
+                label = "rango:white:usb3_2";
+                reg = <0x7>;
+        };
+
+        wps_white@8 {
+                label = "rango:white:wps";
+                reg = <0x8>;
+        };
+
+        wps_amber@9 {
+                label = "rango:amber:wps";
+                reg = <0x9>;
+        };
+};
+
+&gpio_leds {
+        power {
+                gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+                label = "rango:white:power";
+        };
+
+        sata {
+                gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+                label = "rango:white:sata";
+        };
+
+        wlan_2g {
+                gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+                label = "rango:white:wlan_2g";
+        };
+
+        wlan_5g {
+                gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+                label = "rango:white:wlan_5g";
+        };
+};
+
+&gpio_leds_pins {
+        marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+        /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+
+        partition@0 {
+                label = "u-boot";
+                reg = <0x0000000 0x200000>;  /* 2MiB */
+                read-only;
+        };
+
+        partition@200000 {
+                label = "u_env";
+                reg = <0x200000 0x20000>;    /* 128KiB */
+        };
+
+        partition@220000 {
+                label = "s_env";
+                reg = <0x220000 0x40000>;    /* 256KiB */
+        };
+
+        partition@7e0000 {
+                label = "devinfo";
+                reg = <0x7e0000 0x40000>;   /* 256KiB */
+                read-only;
+        };
+
+        partition@820000 {
+                label = "sysdiag";
+                reg = <0x820000 0x1e0000>;   /* 1920KiB */
+                read-only;
+        };
+
+        /* kernel1 overlaps with rootfs1 by design */
+        partition@a00000 {
+                label = "kernel1";
+                reg = <0xa00000 0x5000000>;  /* 80MiB */
+        };
+
+        partition@1000000 {
+                label = "rootfs1";
+                reg = <0x1000000 0x4a00000>;  /* 74MiB */
+        };
+
+        /* kernel2 overlaps with rootfs2 by design */
+        partition@5a00000 {
+                label = "kernel2";
+                reg = <0x5a00000 0x5000000>; /* 80MiB */
+        };
+
+        partition@6000000 {
+                label = "rootfs2";
+                reg = <0x6000000 0x4a00000>; /* 74MiB */
+        };
+
+        /*
+         * 86MiB, last MiB is for the BBT, not writable
+         */
+        partition@aa00000 {
+                label = "syscfg";
+                reg = <0xaa00000 0x5600000>;
+        };
+
+        /*
+         * Unused area between "s_env" and "devinfo".
+         * Moved here because otherwise the renumbered
+         * partitions would break the bootloader
+         * supplied bootargs
+         */
+        partition@180000 {
+                label = "unused_area";
+                reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+        };
+};
+
+&sdhci {
+        pinctrl-names = "default";
+        pinctrl-0 = <&sdhci_pins>;
+        no-1-8-v;
+        non-removable;
+        wp-inverted;
+        bus-width = <8>;
+        status = "okay";
+};
+
+&usb3_1_vbus {
+        gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+        marvell,pins = "mpp44";
+};