diff options
| -rw-r--r-- | drivers/ata/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/pata_imx.c | 253 | ||||
| -rw-r--r-- | drivers/ata/pata_via.c | 18 | ||||
| -rw-r--r-- | drivers/ata/sata_dwc_460ex.c | 14 | ||||
| -rw-r--r-- | drivers/ata/sata_sil.c | 2 |
6 files changed, 288 insertions, 9 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ca3e6be44a04..5987e0ba8c2d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig | |||
| @@ -468,6 +468,15 @@ config PATA_ICSIDE | |||
| 468 | interface card. This is not required for ICS partition support. | 468 | interface card. This is not required for ICS partition support. |
| 469 | If you are unsure, say N to this. | 469 | If you are unsure, say N to this. |
| 470 | 470 | ||
| 471 | config PATA_IMX | ||
| 472 | tristate "PATA support for Freescale iMX" | ||
| 473 | depends on ARCH_MXC | ||
| 474 | help | ||
| 475 | This option enables support for the PATA host available on Freescale | ||
| 476 | iMX SoCs. | ||
| 477 | |||
| 478 | If unsure, say N. | ||
| 479 | |||
| 471 | config PATA_IT8213 | 480 | config PATA_IT8213 |
| 472 | tristate "IT8213 PATA support (Experimental)" | 481 | tristate "IT8213 PATA support (Experimental)" |
| 473 | depends on PCI && EXPERIMENTAL | 482 | depends on PCI && EXPERIMENTAL |
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 8ac64e1aa051..9550d691fd19 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile | |||
| @@ -48,6 +48,7 @@ obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o | |||
| 48 | obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o | 48 | obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o |
| 49 | obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o | 49 | obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o |
| 50 | obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o | 50 | obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o |
| 51 | obj-$(CONFIG_PATA_IMX) += pata_imx.o | ||
| 51 | obj-$(CONFIG_PATA_IT8213) += pata_it8213.o | 52 | obj-$(CONFIG_PATA_IT8213) += pata_it8213.o |
| 52 | obj-$(CONFIG_PATA_IT821X) += pata_it821x.o | 53 | obj-$(CONFIG_PATA_IT821X) += pata_it821x.o |
| 53 | obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o | 54 | obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o |
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c new file mode 100644 index 000000000000..ca9d9caedfa3 --- /dev/null +++ b/drivers/ata/pata_imx.c | |||
| @@ -0,0 +1,253 @@ | |||
| 1 | /* | ||
| 2 | * Freescale iMX PATA driver | ||
| 3 | * | ||
| 4 | * Copyright (C) 2011 Arnaud Patard <arnaud.patard@rtp-net.org> | ||
| 5 | * | ||
| 6 | * Based on pata_platform - Copyright (C) 2006 - 2007 Paul Mundt | ||
| 7 | * | ||
| 8 | * This file is subject to the terms and conditions of the GNU General Public | ||
| 9 | * License. See the file "COPYING" in the main directory of this archive | ||
| 10 | * for more details. | ||
| 11 | * | ||
| 12 | * TODO: | ||
| 13 | * - dmaengine support | ||
| 14 | * - check if timing stuff needed | ||
| 15 | */ | ||
| 16 | #include <linux/kernel.h> | ||
| 17 | #include <linux/module.h> | ||
| 18 | #include <linux/init.h> | ||
| 19 | #include <linux/blkdev.h> | ||
| 20 | #include <scsi/scsi_host.h> | ||
| 21 | #include <linux/ata.h> | ||
| 22 | #include <linux/libata.h> | ||
| 23 | #include <linux/platform_device.h> | ||
| 24 | #include <linux/clk.h> | ||
| 25 | |||
| 26 | #define DRV_NAME "pata_imx" | ||
| 27 | |||
| 28 | #define PATA_IMX_ATA_CONTROL 0x24 | ||
| 29 | #define PATA_IMX_ATA_CTRL_FIFO_RST_B (1<<7) | ||
| 30 | #define PATA_IMX_ATA_CTRL_ATA_RST_B (1<<6) | ||
| 31 | #define PATA_IMX_ATA_CTRL_IORDY_EN (1<<0) | ||
| 32 | #define PATA_IMX_ATA_INT_EN 0x2C | ||
| 33 | #define PATA_IMX_ATA_INTR_ATA_INTRQ2 (1<<3) | ||
| 34 | #define PATA_IMX_DRIVE_DATA 0xA0 | ||
| 35 | #define PATA_IMX_DRIVE_CONTROL 0xD8 | ||
| 36 | |||
| 37 | struct pata_imx_priv { | ||
| 38 | struct clk *clk; | ||
| 39 | /* timings/interrupt/control regs */ | ||
| 40 | u8 *host_regs; | ||
| 41 | u32 ata_ctl; | ||
| 42 | }; | ||
| 43 | |||
| 44 | static int pata_imx_set_mode(struct ata_link *link, struct ata_device **unused) | ||
| 45 | { | ||
| 46 | struct ata_device *dev; | ||
| 47 | struct ata_port *ap = link->ap; | ||
| 48 | struct pata_imx_priv *priv = ap->host->private_data; | ||
| 49 | u32 val; | ||
| 50 | |||
| 51 | ata_for_each_dev(dev, link, ENABLED) { | ||
| 52 | dev->pio_mode = dev->xfer_mode = XFER_PIO_0; | ||
| 53 | dev->xfer_shift = ATA_SHIFT_PIO; | ||
| 54 | dev->flags |= ATA_DFLAG_PIO; | ||
| 55 | |||
| 56 | val = __raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); | ||
| 57 | if (ata_pio_need_iordy(dev)) | ||
| 58 | val |= PATA_IMX_ATA_CTRL_IORDY_EN; | ||
| 59 | else | ||
| 60 | val &= ~PATA_IMX_ATA_CTRL_IORDY_EN; | ||
| 61 | __raw_writel(val, priv->host_regs + PATA_IMX_ATA_CONTROL); | ||
| 62 | |||
| 63 | ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); | ||
| 64 | } | ||
| 65 | return 0; | ||
| 66 | } | ||
| 67 | |||
| 68 | static struct scsi_host_template pata_imx_sht = { | ||
| 69 | ATA_PIO_SHT(DRV_NAME), | ||
| 70 | }; | ||
| 71 | |||
| 72 | static struct ata_port_operations pata_imx_port_ops = { | ||
| 73 | .inherits = &ata_sff_port_ops, | ||
| 74 | .sff_data_xfer = ata_sff_data_xfer_noirq, | ||
| 75 | .cable_detect = ata_cable_unknown, | ||
| 76 | .set_mode = pata_imx_set_mode, | ||
| 77 | }; | ||
| 78 | |||
| 79 | static void pata_imx_setup_port(struct ata_ioports *ioaddr) | ||
| 80 | { | ||
| 81 | /* Fixup the port shift for platforms that need it */ | ||
| 82 | ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2); | ||
| 83 | ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2); | ||
| 84 | ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2); | ||
| 85 | ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2); | ||
| 86 | ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2); | ||
| 87 | ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2); | ||
| 88 | ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2); | ||
| 89 | ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2); | ||
| 90 | ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2); | ||
| 91 | ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2); | ||
| 92 | } | ||
| 93 | |||
| 94 | static int __devinit pata_imx_probe(struct platform_device *pdev) | ||
| 95 | { | ||
| 96 | struct ata_host *host; | ||
| 97 | struct ata_port *ap; | ||
| 98 | struct pata_imx_priv *priv; | ||
| 99 | int irq = 0; | ||
| 100 | struct resource *io_res; | ||
| 101 | |||
| 102 | io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
| 103 | if (io_res == NULL) | ||
| 104 | return -EINVAL; | ||
| 105 | |||
| 106 | irq = platform_get_irq(pdev, 0); | ||
| 107 | if (irq <= 0) | ||
| 108 | return -EINVAL; | ||
| 109 | |||
| 110 | priv = devm_kzalloc(&pdev->dev, | ||
| 111 | sizeof(struct pata_imx_priv), GFP_KERNEL); | ||
| 112 | if (!priv) | ||
| 113 | return -ENOMEM; | ||
| 114 | |||
| 115 | priv->clk = clk_get(&pdev->dev, NULL); | ||
| 116 | if (IS_ERR(priv->clk)) { | ||
| 117 | dev_err(&pdev->dev, "Failed to get clock\n"); | ||
| 118 | return PTR_ERR(priv->clk); | ||
| 119 | } | ||
| 120 | |||
| 121 | clk_enable(priv->clk); | ||
| 122 | |||
| 123 | host = ata_host_alloc(&pdev->dev, 1); | ||
| 124 | if (!host) | ||
| 125 | goto free_priv; | ||
| 126 | |||
| 127 | host->private_data = priv; | ||
| 128 | ap = host->ports[0]; | ||
| 129 | |||
| 130 | ap->ops = &pata_imx_port_ops; | ||
| 131 | ap->pio_mask = ATA_PIO0; | ||
| 132 | ap->flags |= ATA_FLAG_SLAVE_POSS; | ||
| 133 | |||
| 134 | priv->host_regs = devm_ioremap(&pdev->dev, io_res->start, | ||
| 135 | resource_size(io_res)); | ||
| 136 | if (!priv->host_regs) { | ||
| 137 | dev_err(&pdev->dev, "failed to map IO/CTL base\n"); | ||
| 138 | goto free_priv; | ||
| 139 | } | ||
| 140 | |||
| 141 | ap->ioaddr.cmd_addr = priv->host_regs + PATA_IMX_DRIVE_DATA; | ||
| 142 | ap->ioaddr.ctl_addr = priv->host_regs + PATA_IMX_DRIVE_CONTROL; | ||
| 143 | |||
| 144 | ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; | ||
| 145 | |||
| 146 | pata_imx_setup_port(&ap->ioaddr); | ||
| 147 | |||
| 148 | ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", | ||
| 149 | (unsigned long long)io_res->start + PATA_IMX_DRIVE_DATA, | ||
| 150 | (unsigned long long)io_res->start + PATA_IMX_DRIVE_CONTROL); | ||
| 151 | |||
| 152 | /* deassert resets */ | ||
| 153 | __raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B | | ||
| 154 | PATA_IMX_ATA_CTRL_ATA_RST_B, | ||
| 155 | priv->host_regs + PATA_IMX_ATA_CONTROL); | ||
| 156 | /* enable interrupts */ | ||
| 157 | __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, | ||
| 158 | priv->host_regs + PATA_IMX_ATA_INT_EN); | ||
| 159 | |||
| 160 | /* activate */ | ||
| 161 | return ata_host_activate(host, irq, ata_sff_interrupt, 0, | ||
| 162 | &pata_imx_sht); | ||
| 163 | |||
| 164 | free_priv: | ||
| 165 | clk_disable(priv->clk); | ||
| 166 | clk_put(priv->clk); | ||
| 167 | return -ENOMEM; | ||
| 168 | } | ||
| 169 | |||
| 170 | static int __devexit pata_imx_remove(struct platform_device *pdev) | ||
| 171 | { | ||
| 172 | struct ata_host *host = dev_get_drvdata(&pdev->dev); | ||
| 173 | struct pata_imx_priv *priv = host->private_data; | ||
| 174 | |||
| 175 | ata_host_detach(host); | ||
| 176 | |||
| 177 | __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); | ||
| 178 | |||
| 179 | clk_disable(priv->clk); | ||
| 180 | clk_put(priv->clk); | ||
| 181 | |||
| 182 | return 0; | ||
| 183 | } | ||
| 184 | |||
| 185 | #ifdef CONFIG_PM | ||
| 186 | static int pata_imx_suspend(struct device *dev) | ||
| 187 | { | ||
| 188 | struct ata_host *host = dev_get_drvdata(dev); | ||
| 189 | struct pata_imx_priv *priv = host->private_data; | ||
| 190 | int ret; | ||
| 191 | |||
| 192 | ret = ata_host_suspend(host, PMSG_SUSPEND); | ||
| 193 | if (!ret) { | ||
| 194 | __raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN); | ||
| 195 | priv->ata_ctl = | ||
| 196 | __raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL); | ||
| 197 | clk_disable(priv->clk); | ||
| 198 | } | ||
| 199 | |||
| 200 | return ret; | ||
| 201 | } | ||
| 202 | |||
| 203 | static int pata_imx_resume(struct device *dev) | ||
| 204 | { | ||
| 205 | struct ata_host *host = dev_get_drvdata(dev); | ||
| 206 | struct pata_imx_priv *priv = host->private_data; | ||
| 207 | |||
| 208 | clk_enable(priv->clk); | ||
| 209 | |||
| 210 | __raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL); | ||
| 211 | |||
| 212 | __raw_writel(PATA_IMX_ATA_INTR_ATA_INTRQ2, | ||
| 213 | priv->host_regs + PATA_IMX_ATA_INT_EN); | ||
| 214 | |||
| 215 | ata_host_resume(host); | ||
| 216 | |||
| 217 | return 0; | ||
| 218 | } | ||
| 219 | |||
| 220 | static const struct dev_pm_ops pata_imx_pm_ops = { | ||
| 221 | .suspend = pata_imx_suspend, | ||
| 222 | .resume = pata_imx_resume, | ||
| 223 | }; | ||
| 224 | #endif | ||
| 225 | |||
| 226 | static struct platform_driver pata_imx_driver = { | ||
| 227 | .probe = pata_imx_probe, | ||
| 228 | .remove = __devexit_p(pata_imx_remove), | ||
| 229 | .driver = { | ||
| 230 | .name = DRV_NAME, | ||
| 231 | .owner = THIS_MODULE, | ||
| 232 | #ifdef CONFIG_PM | ||
| 233 | .pm = &pata_imx_pm_ops, | ||
| 234 | #endif | ||
| 235 | }, | ||
| 236 | }; | ||
| 237 | |||
| 238 | static int __init pata_imx_init(void) | ||
| 239 | { | ||
| 240 | return platform_driver_register(&pata_imx_driver); | ||
| 241 | } | ||
| 242 | |||
| 243 | static void __exit pata_imx_exit(void) | ||
| 244 | { | ||
| 245 | platform_driver_unregister(&pata_imx_driver); | ||
| 246 | } | ||
| 247 | module_init(pata_imx_init); | ||
| 248 | module_exit(pata_imx_exit); | ||
| 249 | |||
| 250 | MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>"); | ||
| 251 | MODULE_DESCRIPTION("low-level driver for iMX PATA"); | ||
| 252 | MODULE_LICENSE("GPL"); | ||
| 253 | MODULE_ALIAS("platform:" DRV_NAME); | ||
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 65e4be6be220..8e9f5048a10a 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c | |||
| @@ -124,6 +124,17 @@ static const struct via_isa_bridge { | |||
| 124 | { NULL } | 124 | { NULL } |
| 125 | }; | 125 | }; |
| 126 | 126 | ||
| 127 | static const struct dmi_system_id no_atapi_dma_dmi_table[] = { | ||
| 128 | { | ||
| 129 | .ident = "AVERATEC 3200", | ||
| 130 | .matches = { | ||
| 131 | DMI_MATCH(DMI_BOARD_VENDOR, "AVERATEC"), | ||
| 132 | DMI_MATCH(DMI_BOARD_NAME, "3200"), | ||
| 133 | }, | ||
| 134 | }, | ||
| 135 | { } | ||
| 136 | }; | ||
| 137 | |||
| 127 | struct via_port { | 138 | struct via_port { |
| 128 | u8 cached_device; | 139 | u8 cached_device; |
| 129 | }; | 140 | }; |
| @@ -355,6 +366,13 @@ static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask) | |||
| 355 | mask &= ~ ATA_MASK_UDMA; | 366 | mask &= ~ ATA_MASK_UDMA; |
| 356 | } | 367 | } |
| 357 | } | 368 | } |
| 369 | |||
| 370 | if (dev->class == ATA_DEV_ATAPI && | ||
| 371 | dmi_check_system(no_atapi_dma_dmi_table)) { | ||
| 372 | ata_dev_warn(dev, "controller locks up on ATAPI DMA, forcing PIO\n"); | ||
| 373 | mask &= ATA_MASK_PIO; | ||
| 374 | } | ||
| 375 | |||
| 358 | return mask; | 376 | return mask; |
| 359 | } | 377 | } |
| 360 | 378 | ||
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 0a9a774a7e1e..5c4237452f50 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c | |||
| @@ -1329,7 +1329,7 @@ static int sata_dwc_port_start(struct ata_port *ap) | |||
| 1329 | dev_err(ap->dev, "%s: dma_alloc_coherent failed\n", | 1329 | dev_err(ap->dev, "%s: dma_alloc_coherent failed\n", |
| 1330 | __func__); | 1330 | __func__); |
| 1331 | err = -ENOMEM; | 1331 | err = -ENOMEM; |
| 1332 | goto CLEANUP; | 1332 | goto CLEANUP_ALLOC; |
| 1333 | } | 1333 | } |
| 1334 | } | 1334 | } |
| 1335 | 1335 | ||
| @@ -1349,15 +1349,13 @@ static int sata_dwc_port_start(struct ata_port *ap) | |||
| 1349 | /* Clear any error bits before libata starts issuing commands */ | 1349 | /* Clear any error bits before libata starts issuing commands */ |
| 1350 | clear_serror(); | 1350 | clear_serror(); |
| 1351 | ap->private_data = hsdevp; | 1351 | ap->private_data = hsdevp; |
| 1352 | dev_dbg(ap->dev, "%s: done\n", __func__); | ||
| 1353 | return 0; | ||
| 1352 | 1354 | ||
| 1355 | CLEANUP_ALLOC: | ||
| 1356 | kfree(hsdevp); | ||
| 1353 | CLEANUP: | 1357 | CLEANUP: |
| 1354 | if (err) { | 1358 | dev_dbg(ap->dev, "%s: fail. ap->id = %d\n", __func__, ap->print_id); |
| 1355 | sata_dwc_port_stop(ap); | ||
| 1356 | dev_dbg(ap->dev, "%s: fail\n", __func__); | ||
| 1357 | } else { | ||
| 1358 | dev_dbg(ap->dev, "%s: done\n", __func__); | ||
| 1359 | } | ||
| 1360 | |||
| 1361 | return err; | 1359 | return err; |
| 1362 | } | 1360 | } |
| 1363 | 1361 | ||
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 98c1d780f552..9dfb40b8c2c9 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c | |||
| @@ -438,7 +438,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) | |||
| 438 | u8 status; | 438 | u8 status; |
| 439 | 439 | ||
| 440 | if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { | 440 | if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { |
| 441 | u32 serror; | 441 | u32 serror = 0xffffffff; |
| 442 | 442 | ||
| 443 | /* SIEN doesn't mask SATA IRQs on some 3112s. Those | 443 | /* SIEN doesn't mask SATA IRQs on some 3112s. Those |
| 444 | * controllers continue to assert IRQ as long as | 444 | * controllers continue to assert IRQ as long as |
