diff options
-rw-r--r-- | arch/arm/boot/dts/imx6q-bx50v3.dtsi | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi new file mode 100644 index 000000000000..bb66dfd5294c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi | |||
@@ -0,0 +1,225 @@ | |||
1 | /* | ||
2 | * Copyright 2015 Timesys Corporation. | ||
3 | * Copyright 2015 General Electric Company | ||
4 | * | ||
5 | * This file is dual-licensed: you can use it either under the terms | ||
6 | * of the GPL or the X11 license, at your option. Note that this dual | ||
7 | * licensing only applies to this file, and not this project as a | ||
8 | * whole. | ||
9 | * | ||
10 | * a) This file is free software; you can redistribute it and/or | ||
11 | * modify it under the terms of the GNU General Public License | ||
12 | * version 2 as published by the Free Software Foundation. | ||
13 | * | ||
14 | * This file is distributed in the hope that it will be useful | ||
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
17 | * GNU General Public License for more details. | ||
18 | * | ||
19 | * Or, alternatively | ||
20 | * | ||
21 | * b) Permission is hereby granted, free of charge, to any person | ||
22 | * obtaining a copy of this software and associated documentation | ||
23 | * files (the "Software"), to deal in the Software without | ||
24 | * restriction, including without limitation the rights to use | ||
25 | * copy, modify, merge, publish, distribute, sublicense, and/or | ||
26 | * sell copies of the Software, and to permit persons to whom the | ||
27 | * Software is furnished to do so, subject to the following | ||
28 | * conditions: | ||
29 | * | ||
30 | * The above copyright notice and this permission notice shall be | ||
31 | * included in all copies or substantial portions of the Software. | ||
32 | * | ||
33 | * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND | ||
34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | ||
35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | ||
36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | ||
37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY | ||
38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | ||
39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | ||
40 | * OTHER DEALINGS IN THE SOFTWARE. | ||
41 | */ | ||
42 | |||
43 | #include "imx6q-ba16.dtsi" | ||
44 | |||
45 | / { | ||
46 | clocks { | ||
47 | mclk: clock@0 { | ||
48 | compatible = "fixed-clock"; | ||
49 | reg = <0>; | ||
50 | #clock-cells = <0>; | ||
51 | clock-frequency = <22000000>; | ||
52 | }; | ||
53 | }; | ||
54 | |||
55 | reg_wl18xx_vmmc: regulator-wl18xx { | ||
56 | compatible = "regulator-fixed"; | ||
57 | regulator-name = "vwl1807"; | ||
58 | regulator-min-microvolt = <3300000>; | ||
59 | regulator-max-microvolt = <3300000>; | ||
60 | gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>; | ||
61 | startup-delay-us = <70000>; | ||
62 | enable-active-high; | ||
63 | }; | ||
64 | |||
65 | reg_wlan: regulator-wlan { | ||
66 | compatible = "regulator-fixed"; | ||
67 | regulator-name = "3P3V_wlan"; | ||
68 | regulator-min-microvolt = <3300000>; | ||
69 | regulator-max-microvolt = <3300000>; | ||
70 | regulator-always-on; | ||
71 | regulator-boot-on; | ||
72 | gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>; | ||
73 | }; | ||
74 | |||
75 | sound { | ||
76 | compatible = "fsl,imx6q-ba16-sgtl5000", | ||
77 | "fsl,imx-audio-sgtl5000"; | ||
78 | model = "imx6q-ba16-sgtl5000"; | ||
79 | ssi-controller = <&ssi1>; | ||
80 | audio-codec = <&sgtl5000>; | ||
81 | audio-routing = | ||
82 | "MIC_IN", "Mic Jack", | ||
83 | "Mic Jack", "Mic Bias", | ||
84 | "LINE_IN", "Line In Jack", | ||
85 | "Headphone Jack", "HP_OUT"; | ||
86 | mux-int-port = <1>; | ||
87 | mux-ext-port = <4>; | ||
88 | }; | ||
89 | }; | ||
90 | |||
91 | &ecspi5 { | ||
92 | fsl,spi-num-chipselects = <1>; | ||
93 | cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; | ||
94 | pinctrl-names = "default"; | ||
95 | pinctrl-0 = <&pinctrl_ecspi5>; | ||
96 | status = "okay"; | ||
97 | |||
98 | m25_eeprom: m25p80@0 { | ||
99 | compatible = "atmel,at25"; | ||
100 | spi-max-frequency = <20000000>; | ||
101 | size = <0x8000>; | ||
102 | pagesize = <64>; | ||
103 | reg = <0>; | ||
104 | address-width = <16>; | ||
105 | }; | ||
106 | }; | ||
107 | |||
108 | &i2c1 { | ||
109 | pca9547: mux@70 { | ||
110 | compatible = "nxp,pca9547"; | ||
111 | reg = <0x70>; | ||
112 | #address-cells = <1>; | ||
113 | #size-cells = <0>; | ||
114 | |||
115 | mux1_i2c1: i2c@0 { | ||
116 | #address-cells = <1>; | ||
117 | #size-cells = <0>; | ||
118 | reg = <0x0>; | ||
119 | |||
120 | ads7830: ads7830@48 { | ||
121 | compatible = "ti,ads7830"; | ||
122 | reg = <0x48>; | ||
123 | }; | ||
124 | |||
125 | mma8453: mma8453@1c { | ||
126 | compatible = "fsl,mma8453"; | ||
127 | reg = <0x1c>; | ||
128 | }; | ||
129 | }; | ||
130 | |||
131 | mux1_i2c2: i2c@1 { | ||
132 | #address-cells = <1>; | ||
133 | #size-cells = <0>; | ||
134 | reg = <0x1>; | ||
135 | |||
136 | eeprom: eeprom@50 { | ||
137 | compatible = "atmel,24c08"; | ||
138 | reg = <0x50>; | ||
139 | }; | ||
140 | |||
141 | mpl3115: mpl3115@60 { | ||
142 | compatible = "fsl,mpl3115"; | ||
143 | reg = <0x60>; | ||
144 | }; | ||
145 | }; | ||
146 | |||
147 | mux1_i2c3: i2c@2 { | ||
148 | #address-cells = <1>; | ||
149 | #size-cells = <0>; | ||
150 | reg = <0x2>; | ||
151 | }; | ||
152 | |||
153 | mux1_i2c4: i2c@3 { | ||
154 | #address-cells = <1>; | ||
155 | #size-cells = <0>; | ||
156 | reg = <0x3>; | ||
157 | |||
158 | sgtl5000: codec@0a { | ||
159 | compatible = "fsl,sgtl5000"; | ||
160 | reg = <0x0a>; | ||
161 | clocks = <&mclk>; | ||
162 | VDDA-supply = <®_1p8v>; | ||
163 | VDDIO-supply = <®_3p3v>; | ||
164 | }; | ||
165 | }; | ||
166 | |||
167 | mux1_i2c5: i2c@4 { | ||
168 | #address-cells = <1>; | ||
169 | #size-cells = <0>; | ||
170 | reg = <0x4>; | ||
171 | |||
172 | pca9539: pca9539@74 { | ||
173 | compatible = "nxp,pca9539"; | ||
174 | reg = <0x74>; | ||
175 | gpio-controller; | ||
176 | #gpio-cells = <2>; | ||
177 | interrupt-controller; | ||
178 | interrupt-parent = <&gpio2>; | ||
179 | interrupts = <3 IRQ_TYPE_LEVEL_LOW>; | ||
180 | }; | ||
181 | }; | ||
182 | |||
183 | mux1_i2c6: i2c@5 { | ||
184 | #address-cells = <1>; | ||
185 | #size-cells = <0>; | ||
186 | reg = <0x5>; | ||
187 | }; | ||
188 | |||
189 | mux1_i2c7: i2c@6 { | ||
190 | #address-cells = <1>; | ||
191 | #size-cells = <0>; | ||
192 | reg = <0x6>; | ||
193 | }; | ||
194 | |||
195 | mux1_i2c8: i2c@7 { | ||
196 | #address-cells = <1>; | ||
197 | #size-cells = <0>; | ||
198 | reg = <0x7>; | ||
199 | }; | ||
200 | }; | ||
201 | }; | ||
202 | |||
203 | &usdhc4 { | ||
204 | pinctrl-names = "default"; | ||
205 | pinctrl-0 = <&pinctrl_usdhc4>; | ||
206 | bus-width = <4>; | ||
207 | vmmc-supply = <®_wl18xx_vmmc>; | ||
208 | no-1-8-v; | ||
209 | non-removable; | ||
210 | wakeup-source; | ||
211 | keep-power-in-suspend; | ||
212 | cap-power-off-card; | ||
213 | max-frequency = <25000000>; | ||
214 | #address-cells = <1>; | ||
215 | #size-cells = <0>; | ||
216 | status = "okay"; | ||
217 | |||
218 | wlcore: wlcore@2 { | ||
219 | compatible = "ti,wl1837"; | ||
220 | reg = <2>; | ||
221 | interrupt-parent = <&gpio2>; | ||
222 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; | ||
223 | tcxo-clock-frequency = <26000000>; | ||
224 | }; | ||
225 | }; | ||