34 files changed, 374 insertions, 109 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e78720b59d67..683617714e7c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1650,6 +1650,8 @@ static int acm_reset_resume(struct usb_interface *intf)
 
 static const struct usb_device_id acm_ids[] = {
         /* quirky and broken devices */
+        { USB_DEVICE(0x076d, 0x0006), /* Denso Cradle CU-321 */
+        .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
         { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
         .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
         { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 66abdbcfbfa5..11635537c052 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -501,6 +501,7 @@ static void async_completed(struct urb *urb)
         as->status = urb->status;
         signr = as->signr;
         if (signr) {
+                memset(&sinfo, 0, sizeof(sinfo));
                 sinfo.si_signo = as->signr;
                 sinfo.si_errno = as->status;
                 sinfo.si_code = SI_ASYNCIO;
@@ -2382,6 +2383,7 @@ static void usbdev_remove(struct usb_device *udev)
                 wake_up_all(&ps->wait);
                 list_del_init(&ps->list);
                 if (ps->discsignr) {
+                        memset(&sinfo, 0, sizeof(sinfo));
                         sinfo.si_signo = ps->discsignr;
                         sinfo.si_errno = EPIPE;
                         sinfo.si_code = SI_ASYNCIO;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 172d64e585b6..52e0c4e5e48e 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -205,6 +205,18 @@ static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
                                                 omap->irq0_offset, value);
 }
 
+static void dwc3_omap_write_irqmisc_clr(struct dwc3_omap *omap, u32 value)
+{
+        dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_MISC +
+                                                omap->irqmisc_offset, value);
+}
+
+static void dwc3_omap_write_irq0_clr(struct dwc3_omap *omap, u32 value)
+{
+        dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_0 -
+                                                omap->irq0_offset, value);
+}
+
 static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
         enum omap_dwc3_vbus_id_status status)
 {
@@ -345,9 +357,23 @@ static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
 
 static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
 {
+        u32                     reg;
+
         /* disable all IRQs */
-        dwc3_omap_write_irqmisc_set(omap, 0x00);
-        dwc3_omap_write_irq0_set(omap, 0x00);
+        reg = USBOTGSS_IRQO_COREIRQ_ST;
+        dwc3_omap_write_irq0_clr(omap, reg);
+
+        reg = (USBOTGSS_IRQMISC_OEVT |
+                        USBOTGSS_IRQMISC_DRVVBUS_RISE |
+                        USBOTGSS_IRQMISC_CHRGVBUS_RISE |
+                        USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
+                        USBOTGSS_IRQMISC_IDPULLUP_RISE |
+                        USBOTGSS_IRQMISC_DRVVBUS_FALL |
+                        USBOTGSS_IRQMISC_CHRGVBUS_FALL |
+                        USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
+                        USBOTGSS_IRQMISC_IDPULLUP_FALL);
+
+        dwc3_omap_write_irqmisc_clr(omap, reg);
 }
 
 static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 75648145dc1b..c42765b3a060 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1161,7 +1161,6 @@ static ssize_t interf_grp_compatible_id_store(struct usb_os_desc *desc,
         if (desc->opts_mutex)
                 mutex_lock(desc->opts_mutex);
         memcpy(desc->ext_compat_id, page, l);
-        desc->ext_compat_id[l] = '\0';
 
         if (desc->opts_mutex)
                 mutex_unlock(desc->opts_mutex);
@@ -1192,7 +1191,6 @@ static ssize_t interf_grp_sub_compatible_id_store(struct usb_os_desc *desc,
         if (desc->opts_mutex)
                 mutex_lock(desc->opts_mutex);
         memcpy(desc->ext_compat_id + 8, page, l);
-        desc->ext_compat_id[l + 8] = '\0';
 
         if (desc->opts_mutex)
                 mutex_unlock(desc->opts_mutex);
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 426d69a9c018..a2612fb79eff 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -569,7 +569,7 @@ fail:
         return status;
 }
 
-const struct file_operations f_hidg_fops = {
+static const struct file_operations f_hidg_fops = {
         .owner          = THIS_MODULE,
         .open           = f_hidg_open,
         .release        = f_hidg_release,
diff --git a/drivers/usb/gadget/function/f_phonet.c b/drivers/usb/gadget/function/f_phonet.c
index c89e96cfa3e4..c0c3ef272714 100644
--- a/drivers/usb/gadget/function/f_phonet.c
+++ b/drivers/usb/gadget/function/f_phonet.c
@@ -417,7 +417,10 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
                         return -EINVAL;
 
                 spin_lock(&port->lock);
-                __pn_reset(f);
+
+                if (fp->in_ep->driver_data)
+                        __pn_reset(f);
+
                 if (alt == 1) {
                         int i;
 
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index e07c50ced64d..e3dae47baef3 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -344,7 +344,7 @@ static struct usb_endpoint_descriptor ss_int_source_desc = {
         .bInterval =            USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
 };
 
-struct usb_ss_ep_comp_descriptor ss_int_source_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_int_source_comp_desc = {
         .bLength =              USB_DT_SS_EP_COMP_SIZE,
         .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 
@@ -362,7 +362,7 @@ static struct usb_endpoint_descriptor ss_int_sink_desc = {
         .bInterval =            USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
 };
 
-struct usb_ss_ep_comp_descriptor ss_int_sink_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_int_sink_comp_desc = {
         .bLength =              USB_DT_SS_EP_COMP_SIZE,
         .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 33e16658e5cf..6d3eb8b00a48 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -54,7 +54,7 @@
 #define UNFLW_CTRL      8
 #define OVFLW_CTRL      10
 
-const char *uac2_name = "snd_uac2";
+static const char *uac2_name = "snd_uac2";
 
 struct uac2_req {
         struct uac2_rtd_params *pp; /* parent param */
@@ -634,7 +634,7 @@ static struct usb_interface_descriptor std_ac_if_desc = {
 };
 
 /* Clock source for IN traffic */
-struct uac_clock_source_descriptor in_clk_src_desc = {
+static struct uac_clock_source_descriptor in_clk_src_desc = {
         .bLength = sizeof in_clk_src_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -646,7 +646,7 @@ struct uac_clock_source_descriptor in_clk_src_desc = {
 };
 
 /* Clock source for OUT traffic */
-struct uac_clock_source_descriptor out_clk_src_desc = {
+static struct uac_clock_source_descriptor out_clk_src_desc = {
         .bLength = sizeof out_clk_src_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -658,7 +658,7 @@ struct uac_clock_source_descriptor out_clk_src_desc = {
 };
 
 /* Input Terminal for USB_OUT */
-struct uac2_input_terminal_descriptor usb_out_it_desc = {
+static struct uac2_input_terminal_descriptor usb_out_it_desc = {
         .bLength = sizeof usb_out_it_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -672,7 +672,7 @@ struct uac2_input_terminal_descriptor usb_out_it_desc = {
 };
 
 /* Input Terminal for I/O-In */
-struct uac2_input_terminal_descriptor io_in_it_desc = {
+static struct uac2_input_terminal_descriptor io_in_it_desc = {
         .bLength = sizeof io_in_it_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -686,7 +686,7 @@ struct uac2_input_terminal_descriptor io_in_it_desc = {
 };
 
 /* Ouput Terminal for USB_IN */
-struct uac2_output_terminal_descriptor usb_in_ot_desc = {
+static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
         .bLength = sizeof usb_in_ot_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -700,7 +700,7 @@ struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 };
 
 /* Ouput Terminal for I/O-Out */
-struct uac2_output_terminal_descriptor io_out_ot_desc = {
+static struct uac2_output_terminal_descriptor io_out_ot_desc = {
         .bLength = sizeof io_out_ot_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -713,7 +713,7 @@ struct uac2_output_terminal_descriptor io_out_ot_desc = {
         .bmControls = (CONTROL_RDWR << COPY_CTRL),
 };
 
-struct uac2_ac_header_descriptor ac_hdr_desc = {
+static struct uac2_ac_header_descriptor ac_hdr_desc = {
         .bLength = sizeof ac_hdr_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -751,7 +751,7 @@ static struct usb_interface_descriptor std_as_out_if1_desc = {
 };
 
 /* Audio Stream OUT Intface Desc */
-struct uac2_as_header_descriptor as_out_hdr_desc = {
+static struct uac2_as_header_descriptor as_out_hdr_desc = {
         .bLength = sizeof as_out_hdr_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -764,7 +764,7 @@ struct uac2_as_header_descriptor as_out_hdr_desc = {
 };
 
 /* Audio USB_OUT Format */
-struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
+static struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
         .bLength = sizeof as_out_fmt1_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
         .bDescriptorSubtype = UAC_FORMAT_TYPE,
@@ -772,7 +772,7 @@ struct uac2_format_type_i_descriptor as_out_fmt1_desc = {
 };
 
 /* STD AS ISO OUT Endpoint */
-struct usb_endpoint_descriptor fs_epout_desc = {
+static struct usb_endpoint_descriptor fs_epout_desc = {
         .bLength = USB_DT_ENDPOINT_SIZE,
         .bDescriptorType = USB_DT_ENDPOINT,
 
@@ -782,7 +782,7 @@ struct usb_endpoint_descriptor fs_epout_desc = {
         .bInterval = 1,
 };
 
-struct usb_endpoint_descriptor hs_epout_desc = {
+static struct usb_endpoint_descriptor hs_epout_desc = {
         .bLength = USB_DT_ENDPOINT_SIZE,
         .bDescriptorType = USB_DT_ENDPOINT,
 
@@ -828,7 +828,7 @@ static struct usb_interface_descriptor std_as_in_if1_desc = {
 };
 
 /* Audio Stream IN Intface Desc */
-struct uac2_as_header_descriptor as_in_hdr_desc = {
+static struct uac2_as_header_descriptor as_in_hdr_desc = {
         .bLength = sizeof as_in_hdr_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
 
@@ -841,7 +841,7 @@ struct uac2_as_header_descriptor as_in_hdr_desc = {
 };
 
 /* Audio USB_IN Format */
-struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
+static struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
         .bLength = sizeof as_in_fmt1_desc,
         .bDescriptorType = USB_DT_CS_INTERFACE,
         .bDescriptorSubtype = UAC_FORMAT_TYPE,
@@ -849,7 +849,7 @@ struct uac2_format_type_i_descriptor as_in_fmt1_desc = {
 };
 
 /* STD AS ISO IN Endpoint */
-struct usb_endpoint_descriptor fs_epin_desc = {
+static struct usb_endpoint_descriptor fs_epin_desc = {
         .bLength = USB_DT_ENDPOINT_SIZE,
         .bDescriptorType = USB_DT_ENDPOINT,
 
@@ -859,7 +859,7 @@ struct usb_endpoint_descriptor fs_epin_desc = {
         .bInterval = 1,
 };
 
-struct usb_endpoint_descriptor hs_epin_desc = {
+static struct usb_endpoint_descriptor hs_epin_desc = {
         .bLength = USB_DT_ENDPOINT_SIZE,
         .bDescriptorType = USB_DT_ENDPOINT,
 
@@ -1563,7 +1563,7 @@ static void afunc_unbind(struct usb_configuration *c, struct usb_function *f)
                 agdev->out_ep->driver_data = NULL;
 }
 
-struct usb_function *afunc_alloc(struct usb_function_instance *fi)
+static struct usb_function *afunc_alloc(struct usb_function_instance *fi)
 {
         struct audio_dev *agdev;
         struct f_uac2_opts *opts;
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index 5aad7fededa5..8b818fd027b3 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -27,6 +27,7 @@
 #include "uvc.h"
 #include "uvc_queue.h"
 #include "uvc_video.h"
+#include "uvc_v4l2.h"
 
 /* --------------------------------------------------------------------------
  * Requests handling
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 9cb86bc1a9a5..50a5e637ca35 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -21,6 +21,7 @@
 
 #include "uvc.h"
 #include "uvc_queue.h"
+#include "uvc_video.h"
 
 /* --------------------------------------------------------------------------
  * Video codecs
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
index 06acfa55864a..b01b88e1b716 100644
--- a/drivers/usb/gadget/legacy/g_ffs.c
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -133,7 +133,9 @@ struct gfs_configuration {
         struct usb_configuration c;
         int (*eth)(struct usb_configuration *c);
         int num;
-} gfs_configurations[] = {
+};
+
+static struct gfs_configuration gfs_configurations[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
         {
                 .eth            = bind_rndis_config,
@@ -278,7 +280,7 @@ static void *functionfs_acquire_dev(struct ffs_dev *dev)
         if (!try_module_get(THIS_MODULE))
                 return ERR_PTR(-ENOENT);
         
-        return 0;
+        return NULL;
 }
 
 static void functionfs_release_dev(struct ffs_dev *dev)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7f76c8a12f89..fd53c9ebd662 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -37,6 +37,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI      0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI   0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI             0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI         0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI        0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -133,6 +136,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                 pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
                 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
         }
+        if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+                (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+                 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+                 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+                xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+        }
         if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
                         pdev->device == PCI_DEVICE_ID_EJ168) {
                 xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -159,6 +168,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                                 "QUIRK: Resetting on resume");
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+        u32 val;
+        void __iomem *reg;
+
+        reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+        val = readl(reg);
+        writel(val | BIT(28), reg);
+        readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -283,6 +307,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
         if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
                 pdev->no_d3cold = true;
 
+        if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+                xhci_pme_quirk(xhci);
+
         return xhci_suspend(xhci, do_wakeup);
 }
 
@@ -313,6 +340,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
         if (pdev->vendor == PCI_VENDOR_ID_INTEL)
                 usb_enable_intel_xhci_ports(pdev);
 
+        if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+                xhci_pme_quirk(xhci);
+
         retval = xhci_resume(xhci, hibernated);
         return retval;
 }
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 08d402b15482..0e11d61408ff 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -83,16 +83,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
         if (irq < 0)
                 return -ENODEV;
 
-
-        if (of_device_is_compatible(pdev->dev.of_node,
-                                    "marvell,armada-375-xhci") ||
-            of_device_is_compatible(pdev->dev.of_node,
-                                    "marvell,armada-380-xhci")) {
-                ret = xhci_mvebu_mbus_init_quirk(pdev);
-                if (ret)
-                        return ret;
-        }
-
         /* Initialize dma_mask and coherent_dma_mask to 32-bits */
         ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
         if (ret)
@@ -127,6 +117,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
                         goto put_hcd;
         }
 
+        if (of_device_is_compatible(pdev->dev.of_node,
+                                    "marvell,armada-375-xhci") ||
+            of_device_is_compatible(pdev->dev.of_node,
+                                    "marvell,armada-380-xhci")) {
+                ret = xhci_mvebu_mbus_init_quirk(pdev);
+                if (ret)
+                        goto disable_clk;
+        }
+
         ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
         if (ret)
                 goto disable_clk;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 88da8d629820..5fb66db89e05 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1729,7 +1729,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
         if (!command)
                 return;
 
-        ep->ep_state |= EP_HALTED;
+        ep->ep_state |= EP_HALTED | EP_RECENTLY_HALTED;
         ep->stopped_stream = stream_id;
 
         xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
@@ -1946,7 +1946,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
         if (event_trb != ep_ring->dequeue) {
                 /* The event was for the status stage */
                 if (event_trb == td->last_trb) {
-                        if (td->urb->actual_length != 0) {
+                        if (td->urb_length_set) {
                                 /* Don't overwrite a previously set error code
                                  */
                                 if ((*status == -EINPROGRESS || *status == 0) &&
@@ -1960,7 +1960,13 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
                                         td->urb->transfer_buffer_length;
                         }
                 } else {
-                /* Maybe the event was for the data stage? */
+                        /*
+                         * Maybe the event was for the data stage? If so, update
+                         * already the actual_length of the URB and flag it as
+                         * set, so that it is not overwritten in the event for
+                         * the last TRB.
+                         */
+                        td->urb_length_set = true;
                         td->urb->actual_length =
                                 td->urb->transfer_buffer_length -
                                 EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ec8ac1674854..b06d1a53652d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1338,6 +1338,12 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
                 goto exit;
         }
 
+        /* Reject urb if endpoint is in soft reset, queue must stay empty */
+        if (xhci->devs[slot_id]->eps[ep_index].ep_state & EP_CONFIG_PENDING) {
+                xhci_warn(xhci, "Can't enqueue URB while ep is in soft reset\n");
+                ret = -EINVAL;
+        }
+
         if (usb_endpoint_xfer_isoc(&urb->ep->desc))
                 size = urb->number_of_packets;
         else
@@ -2948,23 +2954,36 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
         }
 }
 
-/* Called when clearing halted device. The core should have sent the control
+/* Called after clearing a halted device. USB core should have sent the control
  * message to clear the device halt condition. The host side of the halt should
- * already be cleared with a reset endpoint command issued when the STALL tx
- * event was received.
- *
- * Context: in_interrupt
+ * already be cleared with a reset endpoint command issued immediately when the
+ * STALL tx event was received.
  */
 
 void xhci_endpoint_reset(struct usb_hcd *hcd,
                 struct usb_host_endpoint *ep)
 {
         struct xhci_hcd *xhci;
+        struct usb_device *udev;
+        struct xhci_virt_device *virt_dev;
+        struct xhci_virt_ep *virt_ep;
+        struct xhci_input_control_ctx *ctrl_ctx;
+        struct xhci_command *command;
+        unsigned int ep_index, ep_state;
+        unsigned long flags;
+        u32 ep_flag;
 
         xhci = hcd_to_xhci(hcd);
+        udev = (struct usb_device *) ep->hcpriv;
+        if (!ep->hcpriv)
+                return;
+        virt_dev = xhci->devs[udev->slot_id];
+        ep_index = xhci_get_endpoint_index(&ep->desc);
+        virt_ep = &virt_dev->eps[ep_index];
+        ep_state = virt_ep->ep_state;
 
         /*
-         * We might need to implement the config ep cmd in xhci 4.8.1 note:
+         * Implement the config ep command in xhci 4.6.8 additional note:
          * The Reset Endpoint Command may only be issued to endpoints in the
          * Halted state. If software wishes reset the Data Toggle or Sequence
          * Number of an endpoint that isn't in the Halted state, then software
@@ -2972,9 +2991,72 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
          * for the target endpoint. that is in the Stopped state.
          */
 
-        /* For now just print debug to follow the situation */
-        xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
-                 ep->desc.bEndpointAddress);
+        if (ep_state & SET_DEQ_PENDING || ep_state & EP_RECENTLY_HALTED) {
+                virt_ep->ep_state &= ~EP_RECENTLY_HALTED;
+                xhci_dbg(xhci, "ep recently halted, no toggle reset needed\n");
+                return;
+        }
+
+        /* Only interrupt and bulk ep's use Data toggle, USB2 spec 5.5.4-> */
+        if (usb_endpoint_xfer_control(&ep->desc) ||
+            usb_endpoint_xfer_isoc(&ep->desc))
+                return;
+
+        ep_flag = xhci_get_endpoint_flag(&ep->desc);
+
+        if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
+                return;
+
+        command = xhci_alloc_command(xhci, true, true, GFP_NOWAIT);
+        if (!command) {
+                xhci_err(xhci, "Could not allocate xHCI command structure.\n");
+                return;
+        }
+
+        spin_lock_irqsave(&xhci->lock, flags);
+
+        /* block ringing ep doorbell */
+        virt_ep->ep_state |= EP_CONFIG_PENDING;
+
+        /*
+         * Make sure endpoint ring is empty before resetting the toggle/seq.
+         * Driver is required to synchronously cancel all transfer request.
+         *
+         * xhci 4.6.6 says we can issue a configure endpoint command on a
+         * running endpoint ring as long as it's idle (queue empty)
+         */
+
+        if (!list_empty(&virt_ep->ring->td_list)) {
+                dev_err(&udev->dev, "EP not empty, refuse reset\n");
+                spin_unlock_irqrestore(&xhci->lock, flags);
+                goto cleanup;
+        }
+
+        xhci_dbg(xhci, "Reset toggle/seq for slot %d, ep_index: %d\n",
+                 udev->slot_id, ep_index);
+
+        ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+        if (!ctrl_ctx) {
+                xhci_err(xhci, "Could not get input context, bad type. virt_dev: %p, in_ctx %p\n",
+                         virt_dev, virt_dev->in_ctx);
+                spin_unlock_irqrestore(&xhci->lock, flags);
+                goto cleanup;
+        }
+        xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+                                           virt_dev->out_ctx, ctrl_ctx,
+                                           ep_flag, ep_flag);
+        xhci_endpoint_copy(xhci, command->in_ctx, virt_dev->out_ctx, ep_index);
+
+        xhci_queue_configure_endpoint(xhci, command, command->in_ctx->dma,
+                                     udev->slot_id, false);
+        xhci_ring_cmd_db(xhci);
+        spin_unlock_irqrestore(&xhci->lock, flags);
+
+        wait_for_completion(command->completion);
+
+cleanup:
+        virt_ep->ep_state &= ~EP_CONFIG_PENDING;
+        xhci_free_command(xhci, command);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 974514762a14..265ab1771d24 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1,3 +1,4 @@
+
 /*
  * xHCI host controller driver
  *
@@ -88,9 +89,10 @@ struct xhci_cap_regs {
 #define HCS_IST(p)              (((p) >> 0) & 0xf)
 /* bits 4:7, max number of Event Ring segments */
 #define HCS_ERST_MAX(p)         (((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -863,6 +865,8 @@ struct xhci_virt_ep {
 #define EP_HAS_STREAMS          (1 << 4)
 /* Transitioning the endpoint to not using streams, don't enqueue URBs */
 #define EP_GETTING_NO_STREAMS   (1 << 5)
+#define EP_RECENTLY_HALTED      (1 << 6)
+#define EP_CONFIG_PENDING       (1 << 7)
         /* ----  Related to URB cancellation ---- */
         struct list_head        cancelled_td_list;
         struct xhci_td          *stopped_td;
@@ -1288,6 +1292,8 @@ struct xhci_td {
         struct xhci_segment     *start_seg;
         union xhci_trb          *first_trb;
         union xhci_trb          *last_trb;
+        /* actual_length of the URB has already been set */
+        bool                    urb_length_set;
 };
 
 /* xHCI command default timeout value */
@@ -1560,6 +1566,7 @@ struct xhci_hcd {
 #define XHCI_SPURIOUS_WAKEUP    (1 << 18)
 /* For controllers with a broken beyond repair streams implementation */
 #define XHCI_BROKEN_STREAMS     (1 << 19)
+#define XHCI_PME_STUCK_QUIRK    (1 << 20)
         unsigned int            num_active_eps;
         unsigned int            limit_active_eps;
         /* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index eba9b82e2d70..3cb98b1d5d29 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1274,7 +1274,7 @@ static void errata2_function(unsigned long data)
         for (slot = 0; slot < 32; slot++)
                 if (priv->atl_slots[slot].qh && time_after(jiffies,
                                         priv->atl_slots[slot].timestamp +
-                                        SLOT_TIMEOUT * HZ / 1000)) {
+                                        msecs_to_jiffies(SLOT_TIMEOUT))) {
                         ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
                         if (!FROM_DW0_VALID(ptd.dw0) &&
                                         !FROM_DW3_ACTIVE(ptd.dw3))
@@ -1286,7 +1286,7 @@ static void errata2_function(unsigned long data)
 
         spin_unlock_irqrestore(&priv->lock, spinflags);
 
-        errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+        errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
         add_timer(&errata2_timer);
 }
 
@@ -1336,7 +1336,7 @@ static int isp1760_run(struct usb_hcd *hcd)
                 return retval;
 
         setup_timer(&errata2_timer, errata2_function, (unsigned long)hcd);
-        errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+        errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
         add_timer(&errata2_timer);
 
         chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6f4cbfeed97..067920f2d570 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1969,10 +1969,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
                 goto fail0;
         }
 
-        pm_runtime_use_autosuspend(musb->controller);
-        pm_runtime_set_autosuspend_delay(musb->controller, 200);
-        pm_runtime_enable(musb->controller);
-
         spin_lock_init(&musb->lock);
         musb->board_set_power = plat->set_power;
         musb->min_power = plat->min_power;
@@ -1991,6 +1987,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
         musb_readl = musb_default_readl;
         musb_writel = musb_default_writel;
 
+        /* We need musb_read/write functions initialized for PM */
+        pm_runtime_use_autosuspend(musb->controller);
+        pm_runtime_set_autosuspend_delay(musb->controller, 200);
+        pm_runtime_irq_safe(musb->controller);
+        pm_runtime_enable(musb->controller);
+
         /* The musb_platform_init() call:
          *   - adjusts musb->mregs
          *   - sets the musb->isr
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 53bd0e71d19f..a900c9877195 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -457,12 +457,27 @@ static int dsps_musb_init(struct musb *musb)
         if (IS_ERR(musb->xceiv))
                 return PTR_ERR(musb->xceiv);
 
+        musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
         /* Returns zero if e.g. not clocked */
         rev = dsps_readl(reg_base, wrp->revision);
         if (!rev)
                 return -ENODEV;
 
         usb_phy_init(musb->xceiv);
+        if (IS_ERR(musb->phy))  {
+                musb->phy = NULL;
+        } else {
+                ret = phy_init(musb->phy);
+                if (ret < 0)
+                        return ret;
+                ret = phy_power_on(musb->phy);
+                if (ret) {
+                        phy_exit(musb->phy);
+                        return ret;
+                }
+        }
+
         setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
         /* Reset the musb */
@@ -502,6 +517,8 @@ static int dsps_musb_exit(struct musb *musb)
 
         del_timer_sync(&glue->timer);
         usb_phy_shutdown(musb->xceiv);
+        phy_power_off(musb->phy);
+        phy_exit(musb->phy);
         debugfs_remove_recursive(glue->dbgfs_root);
 
         return 0;
@@ -610,7 +627,7 @@ static int dsps_musb_reset(struct musb *musb)
         struct device *dev = musb->controller;
         struct dsps_glue *glue = dev_get_drvdata(dev->parent);
         const struct dsps_musb_wrapper *wrp = glue->wrp;
-        int session_restart = 0;
+        int session_restart = 0, error;
 
         if (glue->sw_babble_enabled)
                 session_restart = sw_babble_control(musb);
@@ -624,8 +641,14 @@ static int dsps_musb_reset(struct musb *musb)
                 dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
                 usleep_range(100, 200);
                 usb_phy_shutdown(musb->xceiv);
+                error = phy_power_off(musb->phy);
+                if (error)
+                        dev_err(dev, "phy shutdown failed: %i\n", error);
                 usleep_range(100, 200);
                 usb_phy_init(musb->xceiv);
+                error = phy_power_on(musb->phy);
+                if (error)
+                        dev_err(dev, "phy powerup failed: %i\n", error);
                 session_restart = 1;
         }
 
@@ -687,7 +710,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
         struct musb_hdrc_config *config;
         struct platform_device *musb;
         struct device_node *dn = parent->dev.of_node;
-        int ret;
+        int ret, val;
 
         memset(resources, 0, sizeof(resources));
         res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
@@ -739,7 +762,10 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
         pdata.mode = get_musb_port_mode(dev);
         /* DT keeps this entry in mA, musb expects it as per USB spec */
         pdata.power = get_int_prop(dn, "mentor,power") / 2;
-        config->multipoint = of_property_read_bool(dn, "mentor,multipoint");
+
+        ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+        if (!ret && val)
+                config->multipoint = true;
 
         ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
         if (ret) {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 883a9adfdfff..c3d5fc9dfb5b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2613,7 +2613,7 @@ static const struct hc_driver musb_hc_driver = {
         .description            = "musb-hcd",
         .product_desc           = "MUSB HDRC host driver",
         .hcd_priv_size          = sizeof(struct musb *),
-        .flags                  = HCD_USB2 | HCD_MEMORY,
+        .flags                  = HCD_USB2 | HCD_MEMORY | HCD_BH,
 
         /* not using irq handler or reset hooks from usbcore, since
          * those must be shared with peripheral code for OTG configs
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 763649eb4987..cc752d8c7773 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -516,7 +516,7 @@ static int omap2430_probe(struct platform_device *pdev)
         struct omap2430_glue            *glue;
         struct device_node              *np = pdev->dev.of_node;
         struct musb_hdrc_config         *config;
-        int                             ret = -ENOMEM;
+        int                             ret = -ENOMEM, val;
 
         glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
         if (!glue)
@@ -559,7 +559,10 @@ static int omap2430_probe(struct platform_device *pdev)
                 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
                 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
                 of_property_read_u32(np, "power", (u32 *)&pdata->power);
-                config->multipoint = of_property_read_bool(np, "multipoint");
+
+                ret = of_property_read_u32(np, "multipoint", &val);
+                if (!ret && val)
+                        config->multipoint = true;
 
                 pdata->board_data       = data;
                 pdata->config           = config;
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index de83b9d0cd5c..ebc99ee076ce 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -6,6 +6,7 @@ config USB_RENESAS_USBHS
         tristate 'Renesas USBHS controller'
         depends on USB_GADGET
         depends on ARCH_SHMOBILE || SUPERH || COMPILE_TEST
+        depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in
         default n
         help
           Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 9374bd2aba20..8936a83c96cd 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -38,56 +38,51 @@ static int usb_serial_device_match(struct device *dev,
         return 0;
 }
 
-static ssize_t port_number_show(struct device *dev,
-                                struct device_attribute *attr, char *buf)
-{
-        struct usb_serial_port *port = to_usb_serial_port(dev);
-
-        return sprintf(buf, "%d\n", port->port_number);
-}
-static DEVICE_ATTR_RO(port_number);
-
 static int usb_serial_device_probe(struct device *dev)
 {
         struct usb_serial_driver *driver;
         struct usb_serial_port *port;
+        struct device *tty_dev;
         int retval = 0;
         int minor;
 
         port = to_usb_serial_port(dev);
-        if (!port) {
-                retval = -ENODEV;
-                goto exit;
-        }
+        if (!port)
+                return -ENODEV;
 
         /* make sure suspend/resume doesn't race against port_probe */
         retval = usb_autopm_get_interface(port->serial->interface);
         if (retval)
-                goto exit;
+                return retval;
 
         driver = port->serial->type;
         if (driver->port_probe) {
                 retval = driver->port_probe(port);
                 if (retval)
-                        goto exit_with_autopm;
+                        goto err_autopm_put;
         }
 
-        retval = device_create_file(dev, &dev_attr_port_number);
-        if (retval) {
-                if (driver->port_remove)
-                        retval = driver->port_remove(port);
-                goto exit_with_autopm;
+        minor = port->minor;
+        tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev);
+        if (IS_ERR(tty_dev)) {
+                retval = PTR_ERR(tty_dev);
+                goto err_port_remove;
         }
 
-        minor = port->minor;
-        tty_register_device(usb_serial_tty_driver, minor, dev);
+        usb_autopm_put_interface(port->serial->interface);
+
         dev_info(&port->serial->dev->dev,
                  "%s converter now attached to ttyUSB%d\n",
                  driver->description, minor);
 
-exit_with_autopm:
+        return 0;
+
+err_port_remove:
+        if (driver->port_remove)
+                driver->port_remove(port);
+err_autopm_put:
         usb_autopm_put_interface(port->serial->interface);
-exit:
+
         return retval;
 }
 
@@ -114,8 +109,6 @@ static int usb_serial_device_remove(struct device *dev)
         minor = port->minor;
         tty_unregister_device(usb_serial_tty_driver, minor);
 
-        device_remove_file(&port->dev, &dev_attr_port_number);
-
         driver = port->serial->type;
         if (driver->port_remove)
                 retval = driver->port_remove(port);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2d72aa3564a3..ede4f5fcfadd 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -84,6 +84,10 @@ struct ch341_private {
         u8 line_status; /* active status of modem control inputs */
 };
 
+static void ch341_set_termios(struct tty_struct *tty,
+                              struct usb_serial_port *port,
+                              struct ktermios *old_termios);
+
 static int ch341_control_out(struct usb_device *dev, u8 request,
                              u16 value, u16 index)
 {
@@ -309,19 +313,12 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
         struct ch341_private *priv = usb_get_serial_port_data(port);
         int r;
 
-        priv->baud_rate = DEFAULT_BAUD_RATE;
-
         r = ch341_configure(serial->dev, priv);
         if (r)
                 goto out;
 
-        r = ch341_set_handshake(serial->dev, priv->line_control);
-        if (r)
-                goto out;
-
-        r = ch341_set_baudrate(serial->dev, priv);
-        if (r)
-                goto out;
+        if (tty)
+                ch341_set_termios(tty, port, NULL);
 
         dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__);
         r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 29fa1c3d0089..3806e7014199 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -14,6 +14,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/console.h>
@@ -144,6 +145,7 @@ static int usb_console_setup(struct console *co, char *options)
                         init_ldsem(&tty->ldisc_sem);
                         INIT_LIST_HEAD(&tty->tty_files);
                         kref_get(&tty->driver->kref);
+                        __module_get(tty->driver->owner);
                         tty->ops = &usb_console_fake_tty_ops;
                         if (tty_init_termios(tty)) {
                                 retval = -ENOMEM;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f40c856ff758..84ce2d74894c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -147,6 +147,8 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
         { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
         { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
+        { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
+        { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
         { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
         { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
         { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1ebb351b9e9a..3086dec0ef53 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -799,6 +799,8 @@ static const struct usb_device_id id_table_combined[] = {
         { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+        { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
@@ -978,6 +980,23 @@ static const struct usb_device_id id_table_combined[] = {
         { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
         /* GE Healthcare devices */
         { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
+        /* Active Research (Actisense) devices */
+        { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+        { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
+        { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
         { }                                     /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e52409c9be99..56b1b55c4751 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,9 @@
 
 #define FTDI_LUMEL_PD12_PID     0x6002
 
+/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
+#define CYBER_CORTEX_AV_PID     0x8698
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
@@ -1438,3 +1441,23 @@
  */
 #define GE_HEALTHCARE_VID               0x1901
 #define GE_HEALTHCARE_NEMO_TRACKER_PID  0x0015
+
+/*
+ * Active Research (Actisense) devices
+ */
+#define ACTISENSE_NDC_PID               0xD9A8 /* NDC USB Serial Adapter */
+#define ACTISENSE_USG_PID               0xD9A9 /* USG USB Serial Adapter */
+#define ACTISENSE_NGT_PID               0xD9AA /* NGT NMEA2000 Interface */
+#define ACTISENSE_NGW_PID               0xD9AB /* NGW NMEA2000 Gateway */
+#define ACTISENSE_D9AC_PID              0xD9AC /* Actisense Reserved */
+#define ACTISENSE_D9AD_PID              0xD9AD /* Actisense Reserved */
+#define ACTISENSE_D9AE_PID              0xD9AE /* Actisense Reserved */
+#define ACTISENSE_D9AF_PID              0xD9AF /* Actisense Reserved */
+#define CHETCO_SEAGAUGE_PID             0xA548 /* SeaGauge USB Adapter */
+#define CHETCO_SEASWITCH_PID            0xA549 /* SeaSwitch USB Adapter */
+#define CHETCO_SEASMART_NMEA2000_PID    0xA54A /* SeaSmart NMEA2000 Gateway */
+#define CHETCO_SEASMART_ETHERNET_PID    0xA54B /* SeaSmart Ethernet Gateway */
+#define CHETCO_SEASMART_WIFI_PID        0xA5AC /* SeaSmart Wifi Gateway */
+#define CHETCO_SEASMART_DISPLAY_PID     0xA5AD /* SeaSmart NMEA2000 Display */
+#define CHETCO_SEASMART_LITE_PID        0xA5AE /* SeaSmart Lite USB Adapter */
+#define CHETCO_SEASMART_ANALOG_PID      0xA5AF /* SeaSmart Analog Adapter */
diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c
index ab1d690274ae..460a40669967 100644
--- a/drivers/usb/serial/mxuport.c
+++ b/drivers/usb/serial/mxuport.c
@@ -1284,7 +1284,8 @@ static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
         }
 
         /* Initial port termios */
-        mxuport_set_termios(tty, port, NULL);
+        if (tty)
+                mxuport_set_termios(tty, port, NULL);
 
         /*
          * TODO: use RQ_VENDOR_GET_MSR, once we know what it
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0f872e6b2c87..829604d11f3f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -132,6 +132,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define UART_OVERRUN_ERROR              0x40
 #define UART_CTS                        0x80
 
+static void pl2303_set_break(struct usb_serial_port *port, bool enable);
 
 enum pl2303_type {
         TYPE_01,        /* Type 0 and 1 (difference unknown) */
@@ -615,6 +616,7 @@ static void pl2303_close(struct usb_serial_port *port)
 {
         usb_serial_generic_close(port);
         usb_kill_urb(port->interrupt_in_urb);
+        pl2303_set_break(port, false);
 }
 
 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -741,17 +743,16 @@ static int pl2303_ioctl(struct tty_struct *tty,
         return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
+static void pl2303_set_break(struct usb_serial_port *port, bool enable)
 {
-        struct usb_serial_port *port = tty->driver_data;
         struct usb_serial *serial = port->serial;
         u16 state;
         int result;
 
-        if (break_state == 0)
-                state = BREAK_OFF;
-        else
+        if (enable)
                 state = BREAK_ON;
+        else
+                state = BREAK_OFF;
 
         dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
                         state == BREAK_OFF ? "off" : "on");
@@ -763,6 +764,13 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
                 dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
+static void pl2303_break_ctl(struct tty_struct *tty, int state)
+{
+        struct usb_serial_port *port = tty->driver_data;
+
+        pl2303_set_break(port, state);
+}
+
 static void pl2303_update_line_status(struct usb_serial_port *port,
                                       unsigned char *data,
                                       unsigned int actual_length)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 475723c006f9..529066bbc7e8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -687,6 +687,21 @@ static void serial_port_dtr_rts(struct tty_port *port, int on)
                 drv->dtr_rts(p, on);
 }
 
+static ssize_t port_number_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+        struct usb_serial_port *port = to_usb_serial_port(dev);
+
+        return sprintf(buf, "%u\n", port->port_number);
+}
+static DEVICE_ATTR_RO(port_number);
+
+static struct attribute *usb_serial_port_attrs[] = {
+        &dev_attr_port_number.attr,
+        NULL
+};
+ATTRIBUTE_GROUPS(usb_serial_port);
+
 static const struct tty_port_operations serial_port_ops = {
         .carrier_raised         = serial_port_carrier_raised,
         .dtr_rts                = serial_port_dtr_rts,
@@ -902,6 +917,7 @@ static int usb_serial_probe(struct usb_interface *interface,
                 port->dev.driver = NULL;
                 port->dev.bus = &usb_serial_bus_type;
                 port->dev.release = &usb_serial_port_release;
+                port->dev.groups = usb_serial_port_groups;
                 device_initialize(&port->dev);
         }
 
@@ -940,8 +956,9 @@ static int usb_serial_probe(struct usb_interface *interface,
                 port = serial->port[i];
                 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
                         goto probe_error;
-                buffer_size = max_t(int, serial->type->bulk_out_size,
-                                                usb_endpoint_maxp(endpoint));
+                buffer_size = serial->type->bulk_out_size;
+                if (!buffer_size)
+                        buffer_size = usb_endpoint_maxp(endpoint);
                 port->bulk_out_size = buffer_size;
                 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index dbc00e56c7f5..82570425fdfe 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -113,6 +113,13 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
                 USB_SC_DEVICE, USB_PR_DEVICE, NULL,
                 US_FL_NO_ATA_1X),
 
+/* Reported-by: Tom Arild Naess <tanaess@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
+                "JMicron",
+                "JMS539",
+                USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+                US_FL_NO_REPORT_OPCODES),
+
 /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
 UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
                 "JMicron",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index d468d02179f4..5600c33fcadb 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -889,6 +889,12 @@ static void usb_stor_scan_dwork(struct work_struct *work)
             !(us->fflags & US_FL_SCM_MULT_TARG)) {
                 mutex_lock(&us->dev_mutex);
                 us->max_lun = usb_stor_Bulk_max_lun(us);
+                /*
+                 * Allow proper scanning of devices that present more than 8 LUNs
+                 * While not affecting other devices that may need the previous behavior
+                 */
+                if (us->max_lun >= 8)
+                        us_to_host(us)->max_lun = us->max_lun+1;
                 mutex_unlock(&us->dev_mutex);
         }
         scsi_scan_host(us_to_host(us));
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 9bb547c7bce7..704a1ab8240c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -190,8 +190,7 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * @num_ports: the number of different ports this device will have.
  * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
  *      (0 = end-point size)
- * @bulk_out_size: minimum number of bytes to allocate for bulk-out buffer
- *      (0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
  * @calc_num_ports: pointer to a function to determine how many ports this
  *      device has dynamically.  It will be called after the probe()
  *      callback is called, but before attach()