Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
  ftrace/MIPS: Enable C Version of recordmcount
  ftrace/MIPS: Add module support for C version of recordmcount
  ftrace/MIPS: Add MIPS64 support for C version of recordmcount
  MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
  MIPS: Allow UserLocal on MIPS_R1 processors
  MIPS: Honor L2 bypass bit
  MIPS: Add BMIPS CP0 register definitions
  MIPS: Add BMIPS processor types to Kconfig
  MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
  MIPS: Add support for hardware performance events (mipsxx)
  MIPS: Perf-events: Add callchain support
  MIPS: add support for hardware performance events (skeleton)
  MIPS: add support for software performance events
  MIPS: define local_xchg from xchg_local to atomic_long_xchg
  MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
  MIPS: AR7: Initialize GPIO earlier
  MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
  USB: Add EHCI and OHCH glue for OCTEON II SOCs.
  MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
  MIPS: Octeon: Apply CN63XXP1 errata workarounds.
  ...

9 files changed, 648 insertions, 5 deletions

diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 06ddd91ffeda..74b829817891 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -60,7 +60,7 @@ static unsigned int ns_to_tim_reg(unsigned int tim_mult, unsigned int nsecs)
          * Compute # of eclock periods to get desired duration in
          * nanoseconds.
          */
-        val = DIV_ROUND_UP(nsecs * (octeon_get_clock_rate() / 1000000),
+        val = DIV_ROUND_UP(nsecs * (octeon_get_io_clock_rate() / 1000000),
                           1000 * tim_mult);
 
         return val;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index bf2e7d234533..2391c396ca32 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -93,8 +93,9 @@ config USB_EHCI_TT_NEWSCHED
 
 config USB_EHCI_BIG_ENDIAN_MMIO
         bool
-        depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || \
-                                    XPS_USB_HCD_XILINX || PPC_MPC512x)
+        depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
+                                    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
+                                    PPC_MPC512x || CPU_CAVIUM_OCTEON)
         default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
@@ -434,3 +435,28 @@ config USB_IMX21_HCD
          To compile this driver as a module, choose M here: the
          module will be called "imx21-hcd".
 
+config USB_OCTEON_EHCI
+        bool "Octeon on-chip EHCI support"
+        depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
+        default n
+        select USB_EHCI_BIG_ENDIAN_MMIO
+        help
+          Enable support for the Octeon II SOC's on-chip EHCI
+          controller.  It is needed for high-speed (480Mbit/sec)
+          USB 2.0 device support.  All CN6XXX based chips with USB are
+          supported.
+
+config USB_OCTEON_OHCI
+        bool "Octeon on-chip OHCI support"
+        depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
+        default USB_OCTEON_EHCI
+        select USB_OHCI_BIG_ENDIAN_MMIO
+        select USB_OHCI_LITTLE_ENDIAN
+        help
+          Enable support for the Octeon II SOC's on-chip OHCI
+          controller.  It is needed for low-speed USB 1.0 device
+          support.  All CN6XXX based chips with USB are supported.
+
+config USB_OCTEON2_COMMON
+        bool
+        default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 91c5a1bd1026..624a362f2fee 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)       += hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)     += imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
+obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2adae8e39bba..502a7e6fef42 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1211,6 +1211,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER         ehci_atmel_driver
 #endif
 
+#ifdef CONFIG_USB_OCTEON_EHCI
+#include "ehci-octeon.c"
+#define PLATFORM_DRIVER         ehci_octeon_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
new file mode 100644
index 000000000000..a31a031178a8
--- /dev/null
+++ b/drivers/usb/host/ehci-octeon.c
@@ -0,0 +1,207 @@
+/*
+ * EHCI HCD glue for Cavium Octeon II SOCs.
+ *
+ * Loosely based on ehci-au1xxx.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2010 Cavium Networks
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-uctlx-defs.h>
+
+#define OCTEON_EHCI_HCD_NAME "octeon-ehci"
+
+/* Common clock init code.  */
+void octeon2_usb_clocks_start(void);
+void octeon2_usb_clocks_stop(void);
+
+static void ehci_octeon_start(void)
+{
+        union cvmx_uctlx_ehci_ctl ehci_ctl;
+
+        octeon2_usb_clocks_start();
+
+        ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0));
+        /* Use 64-bit addressing. */
+        ehci_ctl.s.ehci_64b_addr_en = 1;
+        ehci_ctl.s.l2c_addr_msb = 0;
+        ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */
+        ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */
+        cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64);
+}
+
+static void ehci_octeon_stop(void)
+{
+        octeon2_usb_clocks_stop();
+}
+
+static const struct hc_driver ehci_octeon_hc_driver = {
+        .description            = hcd_name,
+        .product_desc           = "Octeon EHCI",
+        .hcd_priv_size          = sizeof(struct ehci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq                    = ehci_irq,
+        .flags                  = HCD_MEMORY | HCD_USB2,
+
+        /*
+         * basic lifecycle operations
+         */
+        .reset                  = ehci_init,
+        .start                  = ehci_run,
+        .stop                   = ehci_stop,
+        .shutdown               = ehci_shutdown,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue            = ehci_urb_enqueue,
+        .urb_dequeue            = ehci_urb_dequeue,
+        .endpoint_disable       = ehci_endpoint_disable,
+        .endpoint_reset         = ehci_endpoint_reset,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number       = ehci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data        = ehci_hub_status_data,
+        .hub_control            = ehci_hub_control,
+        .bus_suspend            = ehci_bus_suspend,
+        .bus_resume             = ehci_bus_resume,
+        .relinquish_port        = ehci_relinquish_port,
+        .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
+};
+
+static u64 ehci_octeon_dma_mask = DMA_BIT_MASK(64);
+
+static int ehci_octeon_drv_probe(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd;
+        struct ehci_hcd *ehci;
+        struct resource *res_mem;
+        int irq;
+        int ret;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                dev_err(&pdev->dev, "No irq assigned\n");
+                return -ENODEV;
+        }
+
+        res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res_mem == NULL) {
+                dev_err(&pdev->dev, "No register space assigned\n");
+                return -ENODEV;
+        }
+
+        /*
+         * We can DMA from anywhere. But the descriptors must be in
+         * the lower 4GB.
+         */
+        pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+        pdev->dev.dma_mask = &ehci_octeon_dma_mask;
+
+        hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon");
+        if (!hcd)
+                return -ENOMEM;
+
+        hcd->rsrc_start = res_mem->start;
+        hcd->rsrc_len = res_mem->end - res_mem->start + 1;
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+                                OCTEON_EHCI_HCD_NAME)) {
+                dev_err(&pdev->dev, "request_mem_region failed\n");
+                ret = -EBUSY;
+                goto err1;
+        }
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (!hcd->regs) {
+                dev_err(&pdev->dev, "ioremap failed\n");
+                ret = -ENOMEM;
+                goto err2;
+        }
+
+        ehci_octeon_start();
+
+        ehci = hcd_to_ehci(hcd);
+
+        /* Octeon EHCI matches CPU endianness. */
+#ifdef __BIG_ENDIAN
+        ehci->big_endian_mmio = 1;
+#endif
+
+        ehci->caps = hcd->regs;
+        ehci->regs = hcd->regs +
+                HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+        /* cache this readonly data; minimize chip reads */
+        ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+        ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+        if (ret) {
+                dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+                goto err3;
+        }
+
+        platform_set_drvdata(pdev, hcd);
+
+        /* root ports should always stay powered */
+        ehci_port_power(ehci, 1);
+
+        return 0;
+err3:
+        ehci_octeon_stop();
+
+        iounmap(hcd->regs);
+err2:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+        usb_put_hcd(hcd);
+        return ret;
+}
+
+static int ehci_octeon_drv_remove(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+        usb_remove_hcd(hcd);
+
+        ehci_octeon_stop();
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver ehci_octeon_driver = {
+        .probe          = ehci_octeon_drv_probe,
+        .remove         = ehci_octeon_drv_remove,
+        .shutdown       = usb_hcd_platform_shutdown,
+        .driver = {
+                .name   = OCTEON_EHCI_HCD_NAME,
+                .owner  = THIS_MODULE,
+        }
+};
+
+MODULE_ALIAS("platform:" OCTEON_EHCI_HCD_NAME);
diff --git a/drivers/usb/host/octeon2-common.c b/drivers/usb/host/octeon2-common.c
new file mode 100644
index 000000000000..72d672cfcf39
--- /dev/null
+++ b/drivers/usb/host/octeon2-common.c
@@ -0,0 +1,185 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2010 Cavium Networks
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <asm/atomic.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-uctlx-defs.h>
+
+static atomic_t  octeon2_usb_clock_start_cnt = ATOMIC_INIT(0);
+
+void octeon2_usb_clocks_start(void)
+{
+        u64 div;
+        union cvmx_uctlx_if_ena if_ena;
+        union cvmx_uctlx_clk_rst_ctl clk_rst_ctl;
+        union cvmx_uctlx_uphy_ctl_status uphy_ctl_status;
+        union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status;
+        int i;
+        unsigned long io_clk_64_to_ns;
+
+        if (atomic_inc_return(&octeon2_usb_clock_start_cnt) != 1)
+                return;
+
+        io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate();
+
+        /*
+         * Step 1: Wait for voltages stable.  That surely happened
+         * before starting the kernel.
+         *
+         * Step 2: Enable  SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1
+         */
+        if_ena.u64 = 0;
+        if_ena.s.en = 1;
+        cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64);
+
+        /* Step 3: Configure the reference clock, PHY, and HCLK */
+        clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
+        /* 3a */
+        clk_rst_ctl.s.p_por = 1;
+        clk_rst_ctl.s.hrst = 0;
+        clk_rst_ctl.s.p_prst = 0;
+        clk_rst_ctl.s.h_clkdiv_rst = 0;
+        clk_rst_ctl.s.o_clkdiv_rst = 0;
+        clk_rst_ctl.s.h_clkdiv_en = 0;
+        clk_rst_ctl.s.o_clkdiv_en = 0;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* 3b */
+        /* 12MHz crystal. */
+        clk_rst_ctl.s.p_refclk_sel = 0;
+        clk_rst_ctl.s.p_refclk_div = 0;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* 3c */
+        div = octeon_get_io_clock_rate() / 130000000ull;
+
+        switch (div) {
+        case 0:
+                div = 1;
+                break;
+        case 1:
+        case 2:
+        case 3:
+        case 4:
+                break;
+        case 5:
+                div = 4;
+                break;
+        case 6:
+        case 7:
+                div = 6;
+                break;
+        case 8:
+        case 9:
+        case 10:
+        case 11:
+                div = 8;
+                break;
+        default:
+                div = 12;
+                break;
+        }
+        clk_rst_ctl.s.h_div = div;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+        /* Read it back, */
+        clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
+        clk_rst_ctl.s.h_clkdiv_en = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+        /* 3d */
+        clk_rst_ctl.s.h_clkdiv_rst = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* 3e: delay 64 io clocks */
+        ndelay(io_clk_64_to_ns);
+
+        /*
+         * Step 4: Program the power-on reset field in the UCTL
+         * clock-reset-control register.
+         */
+        clk_rst_ctl.s.p_por = 0;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* Step 5:    Wait 1 ms for the PHY clock to start. */
+        mdelay(1);
+
+        /*
+         * Step 6: Program the reset input from automatic test
+         * equipment field in the UPHY CSR
+         */
+        uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0));
+        uphy_ctl_status.s.ate_reset = 1;
+        cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64);
+
+        /* Step 7: Wait for at least 10ns. */
+        ndelay(10);
+
+        /* Step 8: Clear the ATE_RESET field in the UPHY CSR. */
+        uphy_ctl_status.s.ate_reset = 0;
+        cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64);
+
+        /*
+         * Step 9: Wait for at least 20ns for UPHY to output PHY clock
+         * signals and OHCI_CLK48
+         */
+        ndelay(20);
+
+        /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */
+        /* 10a */
+        clk_rst_ctl.s.o_clkdiv_rst = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* 10b */
+        clk_rst_ctl.s.o_clkdiv_en = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* 10c */
+        ndelay(io_clk_64_to_ns);
+
+        /*
+         * Step 11: Program the PHY reset field:
+         * UCTL0_CLK_RST_CTL[P_PRST] = 1
+         */
+        clk_rst_ctl.s.p_prst = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* Step 12: Wait 1 uS. */
+        udelay(1);
+
+        /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */
+        clk_rst_ctl.s.hrst = 1;
+        cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+        /* Now we can set some other registers.  */
+
+        for (i = 0; i <= 1; i++) {
+                port_ctl_status.u64 =
+                        cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0));
+                /* Set txvreftune to 15 to obtain complient 'eye' diagram. */
+                port_ctl_status.s.txvreftune = 15;
+                cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0),
+                               port_ctl_status.u64);
+        }
+}
+EXPORT_SYMBOL(octeon2_usb_clocks_start);
+
+void octeon2_usb_clocks_stop(void)
+{
+        union cvmx_uctlx_if_ena if_ena;
+
+        if (atomic_dec_return(&octeon2_usb_clock_start_cnt) != 0)
+                return;
+
+        if_ena.u64 = 0;
+        if_ena.s.en = 0;
+        cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64);
+}
+EXPORT_SYMBOL(octeon2_usb_clocks_stop);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f3713f43f3fe..5179acb7aa2f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1106,6 +1106,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER ohci_hcd_jz4740_driver
 #endif
 
+#ifdef CONFIG_USB_OCTEON_OHCI
+#include "ohci-octeon.c"
+#define PLATFORM_DRIVER         ohci_octeon_driver
+#endif
+
 #if     !defined(PCI_DRIVER) &&         \
         !defined(PLATFORM_DRIVER) &&    \
         !defined(OMAP1_PLATFORM_DRIVER) &&      \
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
new file mode 100644
index 000000000000..e4ddfaf8870f
--- /dev/null
+++ b/drivers/usb/host/ohci-octeon.c
@@ -0,0 +1,214 @@
+/*
+ * EHCI HCD glue for Cavium Octeon II SOCs.
+ *
+ * Loosely based on ehci-au1xxx.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2010 Cavium Networks
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-uctlx-defs.h>
+
+#define OCTEON_OHCI_HCD_NAME "octeon-ohci"
+
+/* Common clock init code.  */
+void octeon2_usb_clocks_start(void);
+void octeon2_usb_clocks_stop(void);
+
+static void ohci_octeon_hw_start(void)
+{
+        union cvmx_uctlx_ohci_ctl ohci_ctl;
+
+        octeon2_usb_clocks_start();
+
+        ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0));
+        ohci_ctl.s.l2c_addr_msb = 0;
+        ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */
+        ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */
+        cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64);
+
+}
+
+static void ohci_octeon_hw_stop(void)
+{
+        /* Undo ohci_octeon_start() */
+        octeon2_usb_clocks_stop();
+}
+
+static int __devinit ohci_octeon_start(struct usb_hcd *hcd)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+        int ret;
+
+        ret = ohci_init(ohci);
+
+        if (ret < 0)
+                return ret;
+
+        ret = ohci_run(ohci);
+
+        if (ret < 0) {
+                ohci_err(ohci, "can't start %s", hcd->self.bus_name);
+                ohci_stop(hcd);
+                return ret;
+        }
+
+        return 0;
+}
+
+static const struct hc_driver ohci_octeon_hc_driver = {
+        .description            = hcd_name,
+        .product_desc           = "Octeon OHCI",
+        .hcd_priv_size          = sizeof(struct ohci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq =                  ohci_irq,
+        .flags =                HCD_USB11 | HCD_MEMORY,
+
+        /*
+         * basic lifecycle operations
+         */
+        .start =                ohci_octeon_start,
+        .stop =                 ohci_stop,
+        .shutdown =             ohci_shutdown,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue =          ohci_urb_enqueue,
+        .urb_dequeue =          ohci_urb_dequeue,
+        .endpoint_disable =     ohci_endpoint_disable,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number =     ohci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data =      ohci_hub_status_data,
+        .hub_control =          ohci_hub_control,
+
+        .start_port_reset =     ohci_start_port_reset,
+};
+
+static int ohci_octeon_drv_probe(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd;
+        struct ohci_hcd *ohci;
+        void *reg_base;
+        struct resource *res_mem;
+        int irq;
+        int ret;
+
+        if (usb_disabled())
+                return -ENODEV;
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                dev_err(&pdev->dev, "No irq assigned\n");
+                return -ENODEV;
+        }
+
+        res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res_mem == NULL) {
+                dev_err(&pdev->dev, "No register space assigned\n");
+                return -ENODEV;
+        }
+
+        /* Ohci is a 32-bit device. */
+        pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+        pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+
+        hcd = usb_create_hcd(&ohci_octeon_hc_driver, &pdev->dev, "octeon");
+        if (!hcd)
+                return -ENOMEM;
+
+        hcd->rsrc_start = res_mem->start;
+        hcd->rsrc_len = res_mem->end - res_mem->start + 1;
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+                                OCTEON_OHCI_HCD_NAME)) {
+                dev_err(&pdev->dev, "request_mem_region failed\n");
+                ret = -EBUSY;
+                goto err1;
+        }
+
+        reg_base = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (!reg_base) {
+                dev_err(&pdev->dev, "ioremap failed\n");
+                ret = -ENOMEM;
+                goto err2;
+        }
+
+        ohci_octeon_hw_start();
+
+        hcd->regs = reg_base;
+
+        ohci = hcd_to_ohci(hcd);
+
+        /* Octeon OHCI matches CPU endianness. */
+#ifdef __BIG_ENDIAN
+        ohci->flags |= OHCI_QUIRK_BE_MMIO;
+#endif
+
+        ohci_hcd_init(ohci);
+
+        ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+        if (ret) {
+                dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+                goto err3;
+        }
+
+        platform_set_drvdata(pdev, hcd);
+
+        return 0;
+
+err3:
+        ohci_octeon_hw_stop();
+
+        iounmap(hcd->regs);
+err2:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+        usb_put_hcd(hcd);
+        return ret;
+}
+
+static int ohci_octeon_drv_remove(struct platform_device *pdev)
+{
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+        usb_remove_hcd(hcd);
+
+        ohci_octeon_hw_stop();
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver ohci_octeon_driver = {
+        .probe          = ohci_octeon_drv_probe,
+        .remove         = ohci_octeon_drv_remove,
+        .shutdown       = usb_hcd_platform_shutdown,
+        .driver = {
+                .name   = OCTEON_OHCI_HCD_NAME,
+                .owner  = THIS_MODULE,
+        }
+};
+
+MODULE_ALIAS("platform:" OCTEON_OHCI_HCD_NAME);
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
index 909923800a02..945ee8300306 100644
--- a/drivers/watchdog/octeon-wdt-main.c
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -478,7 +478,7 @@ static void octeon_wdt_calc_parameters(int t)
 
         countdown_reset = periods > 2 ? periods - 2 : 0;
         heartbeat = t;
-        timeout_cnt = ((octeon_get_clock_rate() >> 8) * timeout_sec) >> 8;
+        timeout_cnt = ((octeon_get_io_clock_rate() >> 8) * timeout_sec) >> 8;
 }
 
 static int octeon_wdt_set_heartbeat(int t)
@@ -677,7 +677,7 @@ static int __init octeon_wdt_init(void)
         max_timeout_sec = 6;
         do {
                 max_timeout_sec--;
-                timeout_cnt = ((octeon_get_clock_rate() >> 8) * max_timeout_sec) >> 8;
+                timeout_cnt = ((octeon_get_io_clock_rate() >> 8) * max_timeout_sec) >> 8;
         } while (timeout_cnt > 65535);
 
         BUG_ON(timeout_cnt == 0);