ath9k: Move TX99 config option under ath9k debugging

Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there
such that "make menuconfig" will indent TX99 support below ath9k
debugging.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 20 insertions, 20 deletions

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 40fa915d6f35..f68cb00450e0 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -75,6 +75,26 @@ config ATH9K_STATION_STATISTICS
         ---help---
           This option enables detailed statistics for association stations.
 
+config ATH9K_TX99
+        bool "Atheros ath9k TX99 testing support"
+        depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
+        default n
+        ---help---
+          Say N. This should only be enabled on systems undergoing
+          certification testing and evaluation in a controlled environment.
+          Enabling this will only enable TX99 support, all other modes of
+          operation will be disabled.
+
+          TX99 support enables Specific Absorption Rate (SAR) testing.
+          SAR is the unit of measurement for the amount of radio frequency(RF)
+          absorbed by the body when using a wireless device. The RF exposure
+          limits used are expressed in the terms of SAR, which is a measure
+          of the electric and magnetic field strength and power density for
+          transmitters operating at frequencies from 300 kHz to 100 GHz.
+          Regulatory bodies around the world require that wireless device
+          be evaluated to meet the RF exposure limits set forth in the
+          governmental SAR regulations.
+
 config ATH9K_DFS_CERTIFIED
         bool "Atheros DFS support for certified platforms"
         depends on ATH9K && CFG80211_CERTIFICATION_ONUS
@@ -103,26 +123,6 @@ config ATH9K_DYNACK
           based on ACK frame RX timestamp, TX frame timestamp and frame
           duration
 
-config ATH9K_TX99
-        bool "Atheros ath9k TX99 testing support"
-        depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
-        default n
-        ---help---
-          Say N. This should only be enabled on systems undergoing
-          certification testing and evaluation in a controlled environment.
-          Enabling this will only enable TX99 support, all other modes of
-          operation will be disabled.
-
-          TX99 support enables Specific Absorption Rate (SAR) testing.
-          SAR is the unit of measurement for the amount of radio frequency(RF)
-          absorbed by the body when using a wireless device. The RF exposure
-          limits used are expressed in the terms of SAR, which is a measure
-          of the electric and magnetic field strength and power density for
-          transmitters operating at frequencies from 300 kHz to 100 GHz.
-          Regulatory bodies around the world require that wireless device
-          be evaluated to meet the RF exposure limits set forth in the
-          governmental SAR regulations.
-
 config ATH9K_WOW
         bool "Wake on Wireless LAN support (EXPERIMENTAL)"
         depends on ATH9K && PM