wil6210: reset on power good

Configure hardware to perform full reset on "power good". This mean,
reset HW on system boot. This improves card stability.
By default this is off.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 6 insertions, 2 deletions

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index bd27bee8241f..684762203a62 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -241,8 +241,9 @@ static void wil_target_reset(struct wil6210_priv *wil)
         /* register write */
 #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
         /* register set = read, OR, write */
-#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
-                wil->csr + HOSTADDR(a))
+#define S(a, v) W(a, R(a) | v)
+        /* register clear = read, AND with inverted, write */
+#define C(a, v) W(a, R(a) & ~v)
 
         wil->hw_version = R(RGF_USER_FW_REV_ID);
         rev_id = wil->hw_version & 0xff;
@@ -286,11 +287,14 @@ static void wil_target_reset(struct wil6210_priv *wil)
         if (rev_id == 2)
                 W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
 
+        C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
+
         wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
 
 #undef R
 #undef W
 #undef S
+#undef C
 }
 
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)