i2c: Delete unused i2c-algo-sgi helper module

The i2c-algo-sgi code was merged into the vino driver, so we can
delete it now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

3 files changed, 0 insertions, 184 deletions

diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index b788579b8227..7b2ce4a08524 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -14,8 +14,4 @@ config I2C_ALGOPCF
 config I2C_ALGOPCA
         tristate "I2C PCA 9564 interfaces"
 
-config I2C_ALGO_SGI
-        tristate
-        depends on SGI_IP22 || SGI_IP32 || X86_VISWS
-
 endmenu
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index cac1051bd4f1..18b3e962ec09 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_I2C_ALGOBIT)       += i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)       += i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)       += i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGO_SGI)      += i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
deleted file mode 100644
index 6eaf145e1ada..000000000000
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * i2c-algo-sgi.c: i2c driver algorithm used by the VINO (SGI Indy) and
- * MACE (SGI O2) chips.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License version 2 as published by the Free Software Foundation.
- *
- * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sgi.h>
-
-
-#define SGI_I2C_FORCE_IDLE      (0 << 0)
-#define SGI_I2C_NOT_IDLE        (1 << 0)
-#define SGI_I2C_WRITE           (0 << 1)
-#define SGI_I2C_READ            (1 << 1)
-#define SGI_I2C_RELEASE_BUS     (0 << 2)
-#define SGI_I2C_HOLD_BUS        (1 << 2)
-#define SGI_I2C_XFER_DONE       (0 << 4)
-#define SGI_I2C_XFER_BUSY       (1 << 4)
-#define SGI_I2C_ACK             (0 << 5)
-#define SGI_I2C_NACK            (1 << 5)
-#define SGI_I2C_BUS_OK          (0 << 7)
-#define SGI_I2C_BUS_ERR         (1 << 7)
-
-#define get_control()           adap->getctrl(adap->data)
-#define set_control(val)        adap->setctrl(adap->data, val)
-#define read_data()             adap->rdata(adap->data)
-#define write_data(val)         adap->wdata(adap->data, val)
-
-
-static int wait_xfer_done(struct i2c_algo_sgi_data *adap)
-{
-        int i;
-
-        for (i = 0; i < adap->xfer_timeout; i++) {
-                if ((get_control() & SGI_I2C_XFER_BUSY) == 0)
-                        return 0;
-                udelay(1);
-        }
-
-        return -ETIMEDOUT;
-}
-
-static int wait_ack(struct i2c_algo_sgi_data *adap)
-{
-        int i;
-
-        if (wait_xfer_done(adap))
-                return -ETIMEDOUT;
-        for (i = 0; i < adap->ack_timeout; i++) {
-                if ((get_control() & SGI_I2C_NACK) == 0)
-                        return 0;
-                udelay(1);
-        }
-
-        return -ETIMEDOUT;
-}
-
-static int force_idle(struct i2c_algo_sgi_data *adap)
-{
-        int i;
-
-        set_control(SGI_I2C_FORCE_IDLE);
-        for (i = 0; i < adap->xfer_timeout; i++) {
-                if ((get_control() & SGI_I2C_NOT_IDLE) == 0)
-                        goto out;
-                udelay(1);
-        }
-        return -ETIMEDOUT;
-out:
-        if (get_control() & SGI_I2C_BUS_ERR)
-                return -EIO;
-        return 0;
-}
-
-static int do_address(struct i2c_algo_sgi_data *adap, unsigned int addr,
-                      int rd)
-{
-        if (rd)
-                set_control(SGI_I2C_NOT_IDLE);
-        /* Check if bus is idle, eventually force it to do so */
-        if (get_control() & SGI_I2C_NOT_IDLE)
-                if (force_idle(adap))
-                        return -EIO;
-        /* Write out the i2c chip address and specify operation */
-        set_control(SGI_I2C_HOLD_BUS | SGI_I2C_WRITE | SGI_I2C_NOT_IDLE);
-        if (rd)
-                addr |= 1;
-        write_data(addr);
-        if (wait_ack(adap))
-                return -EIO;
-        return 0;
-}
-
-static int i2c_read(struct i2c_algo_sgi_data *adap, unsigned char *buf,
-                    unsigned int len)
-{
-        int i;
-
-        set_control(SGI_I2C_HOLD_BUS | SGI_I2C_READ | SGI_I2C_NOT_IDLE);
-        for (i = 0; i < len; i++) {
-                if (wait_xfer_done(adap))
-                        return -EIO;
-                buf[i] = read_data();
-        }
-        set_control(SGI_I2C_RELEASE_BUS | SGI_I2C_FORCE_IDLE);
-
-        return 0;
-
-}
-
-static int i2c_write(struct i2c_algo_sgi_data *adap, unsigned char *buf,
-                     unsigned int len)
-{
-        int i;
-
-        /* We are already in write state */
-        for (i = 0; i < len; i++) {
-                write_data(buf[i]);
-                if (wait_ack(adap))
-                        return -EIO;
-        }
-        return 0;
-}
-
-static int sgi_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
-                    int num)
-{
-        struct i2c_algo_sgi_data *adap = i2c_adap->algo_data;
-        struct i2c_msg *p;
-        int i, err = 0;
-
-        for (i = 0; !err && i < num; i++) {
-                p = &msgs[i];
-                err = do_address(adap, p->addr, p->flags & I2C_M_RD);
-                if (err || !p->len)
-                        continue;
-                if (p->flags & I2C_M_RD)
-                        err = i2c_read(adap, p->buf, p->len);
-                else
-                        err = i2c_write(adap, p->buf, p->len);
-        }
-
-        return (err < 0) ? err : i;
-}
-
-static u32 sgi_func(struct i2c_adapter *adap)
-{
-        return I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm sgi_algo = {
-        .master_xfer    = sgi_xfer,
-        .functionality  = sgi_func,
-};
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_sgi_add_bus(struct i2c_adapter *adap)
-{
-        adap->algo = &sgi_algo;
-
-        return i2c_add_adapter(adap);
-}
-EXPORT_SYMBOL(i2c_sgi_add_bus);
-
-MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
-MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
-MODULE_LICENSE("GPL");