ARC: boot log: don't assume SWAPE instruction support

This came to light when helping a customer with oldish ARC750 core who
were getting instruction errors because of lack of SWAPE but boot log
was incorrectly printing it as being present

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

1 files changed, 4 insertions, 1 deletions

diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 0170d94f3860..156981aecd74 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -138,6 +138,9 @@ static void read_arc_build_cfg_regs(void)
         cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
         cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
         cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
+        cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
+                                IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
+
         READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
         /* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
@@ -250,7 +253,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
                        IS_AVAIL1(cpu->extn.swap, "swap "),
                        IS_AVAIL1(cpu->extn.minmax, "minmax "),
                        IS_AVAIL1(cpu->extn.crc, "crc "),
-                       IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE));
+                       IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
 
         if (cpu->bpu.ver)
                 n += scnprintf(buf + n, len - n,