Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt

From Nicolas Ferre:
First DT pull-request for 3.14
- many little corrections and documentation updates
- LCD FB Device Tree for at91sam9263 and at91sam9g45 boards
- crypto peripherals DT entries + DMA specification
- new Cosino board

* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
  ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
  ARM: at91: dt: at91rm9200ek: add emac and nor flash support
  ARM: at91: add uart aliases to sama5d3 dtsi
  ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
  ARM: at91: Animeo IP: fix mtd partition table
  ARM: at91: at91sam9g45: add i2c pinctrl
  ARM: at91: at91sam9g45: set default mmc pinctrl-names
  ARM: at91: sama5d3: enable qt1070 as a wakeup source
  ARM: at91: add support for Cosino board series by HCE Engineering
  ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
  ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
  ARM: at91/dt/trivial: use macro for AES irq type
  ARM: at91: sam9263ek: add dt lcd support
  ARM: at91: at9sam9m10g45ek: add dt lcd support
  ARM: at91: sam9263: add fb dt support
  ARM: at91: sam9g45: add fb dt support
  ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
  ARM: at91/dt: binding: add precision to AIC documentation
  ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
  ARM: at91/dt: add ethernet phy to at91rm9200ek board
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

2 files changed, 3 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
index ad031211b5b8..2742e9cfd6b1 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: Should be "atmel,<chip>-aic"
+  <chip> can be "at91rm9200" or "sama5d3"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 1196290082d1..d2170e780f0b 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -50,7 +50,8 @@ Example:
         };
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91sam9260-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc",
+                        "atmel,at91sam9260-sdramc",
                         "atmel,at91sam9g45-ddramc",
 - reg: Should contain registers location and length
   For at91sam9263 and at91sam9g45 you must specify 2 entries.