ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver

Add OF document for Cirrus Logic CLPS711X irqchip driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>

1 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 000000000000..759339c34e4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,clps711x-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID      Name    Description
+---------------------------
+1:      BLINT   Battery low (FIQ)
+3:      MCINT   Media changed (FIQ)
+4:      CSINT   CODEC sound
+5:      EINT1   External 1
+6:      EINT2   External 2
+7:      EINT3   External 3
+8:      TC1OI   TC1 under flow
+9:      TC2OI   TC2 under flow
+10:     RTCMI   RTC compare match
+11:     TINT    64Hz tick
+12:     UTXINT1 UART1 transmit FIFO half empty
+13:     URXINT1 UART1 receive FIFO half full
+14:     UMSINT  UART1 modem status changed
+15:     SSEOTI  SSI1 end of transfer
+16:     KBDINT  Keyboard
+17:     SS2RX   SSI2 receive FIFO half or greater full
+18:     SS2TX   SSI2 transmit FIFO less than half empty
+28:     UTXINT2 UART2 transmit FIFO half empty
+29:     URXINT2 UART2 receive FIFO half full
+32:     DAIINT  DAI interface (FIQ)
+
+Example:
+        intc: interrupt-controller {
+                compatible = "cirrus,clps711x-intc";
+                reg = <0x80000000 0x4000>;
+                interrupt-controller;
+                #interrupt-cells = <1>;
+        };