Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
Please accept this batch of fixes intended for the 3.11 tree...

Alexey Khoroshilov fixes a suspend-related race in ath9k_htc.

Arnd Bergmann corrects the alignment of a structure in the ssb code
to be compatible with ARM devices.

Bob Copeland provides an ath5k fix that corrects a mistaken variable
initialization.

Felix Fietkau corrects some frame accounting for dropped frames
in ath9k.

Geert Uytterhoeven brings a Kconfig fix to indicate the DMA
requirements for rt2x00.

Larry Finger offers two rtlwifi fixes: one that properly initializes
a callback; and, a scattered collection of Kconfig, Makefile, and
EXPORT_SYMBOL changes that correct some build problems.

Finally, Sujith Manoharan provides an ath9k fix to disable a feature
on a specific hardware device.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

17 files changed, 154 insertions, 72 deletions

diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 81b686c6a376..40825d43322e 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -325,7 +325,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw,
         struct netdev_hw_addr *ha;
 
         mfilt[0] = 0;
-        mfilt[1] = 1;
+        mfilt[1] = 0;
 
         netdev_hw_addr_list_for_each(ha, mc_list) {
                 /* calculate XOR of eight 6-bit values */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index d1acfe98918a..1576d58291d4 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -610,7 +610,15 @@ static void ar5008_hw_override_ini(struct ath_hw *ah,
         REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
 
         if (AR_SREV_9280_20_OR_LATER(ah)) {
-                val = REG_READ(ah, AR_PCU_MISC_MODE2);
+                /*
+                 * For AR9280 and above, there is a new feature that allows
+                 * Multicast search based on both MAC Address and Key ID.
+                 * By default, this feature is enabled. But since the driver
+                 * is not using this feature, we switch it off; otherwise
+                 * multicast search based on MAC addr only will fail.
+                 */
+                val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+                        (~AR_ADHOC_MCAST_KEYID_ENABLE);
 
                 if (!AR_SREV_9271(ah))
                         val &= ~AR_PCU_MISC_MODE2_HWWAR1;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 9e582e14da74..2469db5a5bb1 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1082,7 +1082,7 @@ static void ath9k_hif_usb_firmware_fail(struct hif_device_usb *hif_dev)
         struct device *dev = &hif_dev->udev->dev;
         struct device *parent = dev->parent;
 
-        complete(&hif_dev->fw_done);
+        complete_all(&hif_dev->fw_done);
 
         if (parent)
                 device_lock(parent);
@@ -1131,7 +1131,7 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context)
 
         release_firmware(fw);
         hif_dev->flags |= HIF_USB_READY;
-        complete(&hif_dev->fw_done);
+        complete_all(&hif_dev->fw_done);
 
         return;
 
@@ -1316,7 +1316,10 @@ static int ath9k_hif_usb_suspend(struct usb_interface *interface,
         if (!(hif_dev->flags & HIF_USB_START))
                 ath9k_htc_suspend(hif_dev->htc_handle);
 
-        ath9k_hif_usb_dealloc_urbs(hif_dev);
+        wait_for_completion(&hif_dev->fw_done);
+
+        if (hif_dev->flags & HIF_USB_READY)
+                ath9k_hif_usb_dealloc_urbs(hif_dev);
 
         return 0;
 }
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index c59ae43b9b35..927992732620 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -146,6 +146,28 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta,
                                ARRAY_SIZE(bf->rates));
 }
 
+static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq,
+                             struct sk_buff *skb)
+{
+        int q;
+
+        q = skb_get_queue_mapping(skb);
+        if (txq == sc->tx.uapsdq)
+                txq = sc->tx.txq_map[q];
+
+        if (txq != sc->tx.txq_map[q])
+                return;
+
+        if (WARN_ON(--txq->pending_frames < 0))
+                txq->pending_frames = 0;
+
+        if (txq->stopped &&
+            txq->pending_frames < sc->tx.txq_max_pending[q]) {
+                ieee80211_wake_queue(sc->hw, q);
+                txq->stopped = false;
+        }
+}
+
 static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 {
         struct ath_txq *txq = tid->ac->txq;
@@ -167,6 +189,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
                 if (!bf) {
                         bf = ath_tx_setup_buffer(sc, txq, tid, skb);
                         if (!bf) {
+                                ath_txq_skb_done(sc, txq, skb);
                                 ieee80211_free_txskb(sc->hw, skb);
                                 continue;
                         }
@@ -811,6 +834,7 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq,
 
                 if (!bf) {
                         __skb_unlink(skb, &tid->buf_q);
+                        ath_txq_skb_done(sc, txq, skb);
                         ieee80211_free_txskb(sc->hw, skb);
                         continue;
                 }
@@ -1824,6 +1848,7 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_txq *txq,
 
         bf = ath_tx_setup_buffer(sc, txq, tid, skb);
         if (!bf) {
+                ath_txq_skb_done(sc, txq, skb);
                 ieee80211_free_txskb(sc->hw, skb);
                 return;
         }
@@ -2090,6 +2115,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 
         bf = ath_tx_setup_buffer(sc, txq, tid, skb);
         if (!bf) {
+                ath_txq_skb_done(sc, txq, skb);
                 if (txctl->paprd)
                         dev_kfree_skb_any(skb);
                 else
@@ -2189,7 +2215,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
         struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
-        int q, padpos, padsize;
+        int padpos, padsize;
         unsigned long flags;
 
         ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
@@ -2225,21 +2251,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 
         __skb_queue_tail(&txq->complete_q, skb);
-
-        q = skb_get_queue_mapping(skb);
-        if (txq == sc->tx.uapsdq)
-                txq = sc->tx.txq_map[q];
-
-        if (txq == sc->tx.txq_map[q]) {
-                if (WARN_ON(--txq->pending_frames < 0))
-                        txq->pending_frames = 0;
-
-                if (txq->stopped &&
-                    txq->pending_frames < sc->tx.txq_max_pending[q]) {
-                        ieee80211_wake_queue(sc->hw, q);
-                        txq->stopped = false;
-                }
-        }
+        ath_txq_skb_done(sc, txq, skb);
 }
 
 static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 9b915d3a44be..3e60a31582f8 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,6 +1,6 @@
 menuconfig RT2X00
         tristate "Ralink driver support"
-        depends on MAC80211
+        depends on MAC80211 && HAS_DMA
         ---help---
           This will enable the support for the Ralink drivers,
           developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 7253de3d8c66..c2ffce7a907c 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -1,27 +1,20 @@
-config RTLWIFI
-        tristate "Realtek wireless card support"
-        depends on MAC80211
-        select FW_LOADER
-        ---help---
-          This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE
-          drivers.  This module does nothing by itself - the various front-end
-          drivers need to be enabled to support any desired devices.
-
-          If you choose to build as a module, it'll be called rtlwifi.
-
-config RTLWIFI_DEBUG
-        bool "Debugging output for rtlwifi driver family"
-        depends on RTLWIFI
+menuconfig RTL_CARDS
+        tristate "Realtek rtlwifi family of devices"
+        depends on MAC80211 && (PCI || USB)
         default y
         ---help---
-        To use the module option that sets the dynamic-debugging level for,
-        the front-end driver, this parameter must be "Y". For memory-limited
-        systems, choose "N". If in doubt, choose "Y".
+          This option will enable support for the Realtek mac80211-based
+          wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
+          rtl8723eu, and rtl8188eu share some common code.
+
+if RTL_CARDS
 
 config RTL8192CE
         tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
-        depends on RTLWIFI && PCI
+        depends on PCI
         select RTL8192C_COMMON
+        select RTLWIFI
+        select RTLWIFI_PCI
         ---help---
         This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
         wireless network adapters.
@@ -30,7 +23,9 @@ config RTL8192CE
 
 config RTL8192SE
         tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
-        depends on RTLWIFI && PCI
+        depends on PCI
+        select RTLWIFI
+        select RTLWIFI_PCI
         ---help---
         This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
         wireless network adapters.
@@ -39,7 +34,9 @@ config RTL8192SE
 
 config RTL8192DE
         tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
-        depends on RTLWIFI && PCI
+        depends on PCI
+        select RTLWIFI
+        select RTLWIFI_PCI
         ---help---
         This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
         wireless network adapters.
@@ -48,7 +45,9 @@ config RTL8192DE
 
 config RTL8723AE
         tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
-        depends on RTLWIFI && PCI
+        depends on PCI
+        select RTLWIFI
+        select RTLWIFI_PCI
         ---help---
         This is the driver for Realtek RTL8723AE 802.11n PCIe
         wireless network adapters.
@@ -57,7 +56,9 @@ config RTL8723AE
 
 config RTL8188EE
         tristate "Realtek RTL8188EE Wireless Network Adapter"
-        depends on RTLWIFI && PCI
+        depends on PCI
+        select RTLWIFI
+        select RTLWIFI_PCI
         ---help---
         This is the driver for Realtek RTL8188EE 802.11n PCIe
         wireless network adapters.
@@ -66,7 +67,9 @@ config RTL8188EE
 
 config RTL8192CU
         tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
-        depends on RTLWIFI && USB
+        depends on USB
+        select RTLWIFI
+        select RTLWIFI_USB
         select RTL8192C_COMMON
         ---help---
         This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
@@ -74,7 +77,28 @@ config RTL8192CU
 
         If you choose to build it as a module, it will be called rtl8192cu
 
+config RTLWIFI
+        tristate
+        select FW_LOADER
+
+config RTLWIFI_PCI
+        tristate
+
+config RTLWIFI_USB
+        tristate
+
+config RTLWIFI_DEBUG
+        bool "Debugging output for rtlwifi driver family"
+        depends on RTLWIFI
+        default y
+        ---help---
+        To use the module option that sets the dynamic-debugging level for,
+        the front-end driver, this parameter must be "Y". For memory-limited
+        systems, choose "N". If in doubt, choose "Y".
+
 config RTL8192C_COMMON
         tristate
         depends on RTL8192CE || RTL8192CU
-        default m
+        default y
+
+endif
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
index ff02b874f8d8..d56f023a4b90 100644
--- a/drivers/net/wireless/rtlwifi/Makefile
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -12,13 +12,11 @@ rtlwifi-objs	:=		\
 
 rtl8192c_common-objs +=         \
 
-ifneq ($(CONFIG_PCI),)
-rtlwifi-objs    += pci.o
-endif
+obj-$(CONFIG_RTLWIFI_PCI)       += rtl_pci.o
+rtl_pci-objs    :=              pci.o
 
-ifneq ($(CONFIG_USB),)
-rtlwifi-objs    += usb.o
-endif
+obj-$(CONFIG_RTLWIFI_USB)       += rtl_usb.o
+rtl_usb-objs    :=              usb.o
 
 obj-$(CONFIG_RTL8192C_COMMON)   += rtl8192c/
 obj-$(CONFIG_RTL8192CE)         += rtl8192ce/
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 9d558ac77b0c..7651f5acc14b 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -172,6 +172,7 @@ u8 rtl_tid_to_ac(u8 tid)
 {
         return tid_to_ac[tid];
 }
+EXPORT_SYMBOL_GPL(rtl_tid_to_ac);
 
 static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
                                   struct ieee80211_sta_ht_cap *ht_cap)
@@ -406,6 +407,7 @@ void rtl_deinit_deferred_work(struct ieee80211_hw *hw)
         cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
         cancel_delayed_work(&rtlpriv->works.fwevt_wq);
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work);
 
 void rtl_init_rfkill(struct ieee80211_hw *hw)
 {
@@ -439,6 +441,7 @@ void rtl_deinit_rfkill(struct ieee80211_hw *hw)
 {
         wiphy_rfkill_stop_polling(hw->wiphy);
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_rfkill);
 
 int rtl_init_core(struct ieee80211_hw *hw)
 {
@@ -489,10 +492,12 @@ int rtl_init_core(struct ieee80211_hw *hw)
 
         return 0;
 }
+EXPORT_SYMBOL_GPL(rtl_init_core);
 
 void rtl_deinit_core(struct ieee80211_hw *hw)
 {
 }
+EXPORT_SYMBOL_GPL(rtl_deinit_core);
 
 void rtl_init_rx_config(struct ieee80211_hw *hw)
 {
@@ -501,6 +506,7 @@ void rtl_init_rx_config(struct ieee80211_hw *hw)
 
         rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
 }
+EXPORT_SYMBOL_GPL(rtl_init_rx_config);
 
 /*********************************************************
  *
@@ -879,6 +885,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb)
 
         return true;
 }
+EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc);
 
 void rtl_get_tcb_desc(struct ieee80211_hw *hw,
                       struct ieee80211_tx_info *info,
@@ -1052,6 +1059,7 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 
         return true;
 }
+EXPORT_SYMBOL_GPL(rtl_action_proc);
 
 /*should call before software enc*/
 u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
@@ -1125,6 +1133,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
 
         return false;
 }
+EXPORT_SYMBOL_GPL(rtl_is_special_data);
 
 /*********************************************************
  *
@@ -1300,6 +1309,7 @@ void rtl_beacon_statistic(struct ieee80211_hw *hw, struct sk_buff *skb)
 
         rtlpriv->link_info.bcn_rx_inperiod++;
 }
+EXPORT_SYMBOL_GPL(rtl_beacon_statistic);
 
 void rtl_watchdog_wq_callback(void *data)
 {
@@ -1793,6 +1803,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len)
 
         mac->vendor = vendor;
 }
+EXPORT_SYMBOL_GPL(rtl_recognize_peer);
 
 /*********************************************************
  *
@@ -1849,6 +1860,7 @@ struct attribute_group rtl_attribute_group = {
         .name = "rtlsysfs",
         .attrs = rtl_sysfs_entries,
 };
+EXPORT_SYMBOL_GPL(rtl_attribute_group);
 
 MODULE_AUTHOR("lizhaoming       <chaoming_li@realsil.com.cn>");
 MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
@@ -1856,7 +1868,8 @@ MODULE_AUTHOR("Larry Finger	<Larry.FInger@lwfinger.net>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
 
-struct rtl_global_var global_var = {};
+struct rtl_global_var rtl_global_var = {};
+EXPORT_SYMBOL_GPL(rtl_global_var);
 
 static int __init rtl_core_module_init(void)
 {
@@ -1864,8 +1877,8 @@ static int __init rtl_core_module_init(void)
                 pr_err("Unable to register rtl_rc, use default RC !!\n");
 
         /* init some global vars */
-        INIT_LIST_HEAD(&global_var.glb_priv_list);
-        spin_lock_init(&global_var.glb_list_lock);
+        INIT_LIST_HEAD(&rtl_global_var.glb_priv_list);
+        spin_lock_init(&rtl_global_var.glb_list_lock);
 
         return 0;
 }
diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h
index 8576bc34b032..0e5fe0902daf 100644
--- a/drivers/net/wireless/rtlwifi/base.h
+++ b/drivers/net/wireless/rtlwifi/base.h
@@ -147,7 +147,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len);
 u8 rtl_tid_to_ac(u8 tid);
 extern struct attribute_group rtl_attribute_group;
 void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
-extern struct rtl_global_var global_var;
+extern struct rtl_global_var rtl_global_var;
 int rtlwifi_rate_mapping(struct ieee80211_hw *hw,
                          bool isht, u8 desc_rate, bool first_ampdu);
 bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index ee84844be008..733b7ce7f0e2 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -1330,3 +1330,4 @@ const struct ieee80211_ops rtl_ops = {
         .rfkill_poll = rtl_op_rfkill_poll,
         .flush = rtl_op_flush,
 };
+EXPORT_SYMBOL_GPL(rtl_ops);
diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
index 7d52d3d7769f..76e2086e137e 100644
--- a/drivers/net/wireless/rtlwifi/debug.c
+++ b/drivers/net/wireless/rtlwifi/debug.c
@@ -51,3 +51,4 @@ void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
 
         /*Init Debug flag enable condition */
 }
+EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 9e3894178e77..838a1ed3f194 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -229,6 +229,7 @@ void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
 
         *pbuf = (u8) (value32 & 0xff);
 }
+EXPORT_SYMBOL_GPL(read_efuse_byte);
 
 void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
 {
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index c97e9d327331..703f839af6ca 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -35,6 +35,13 @@
 #include "efuse.h"
 #include <linux/export.h>
 #include <linux/kmemleak.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming       <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger     <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCI basic driver for rtlwifi");
 
 static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
         PCI_VENDOR_ID_INTEL,
@@ -1008,19 +1015,6 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
         return;
 }
 
-static void rtl_lps_change_work_callback(struct work_struct *work)
-{
-        struct rtl_works *rtlworks =
-            container_of(work, struct rtl_works, lps_change_work);
-        struct ieee80211_hw *hw = rtlworks->hw;
-        struct rtl_priv *rtlpriv = rtl_priv(hw);
-
-        if (rtlpriv->enter_ps)
-                rtl_lps_enter(hw);
-        else
-                rtl_lps_leave(hw);
-}
-
 static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
 {
         struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
@@ -1899,7 +1893,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
         rtlpriv->rtlhal.interface = INTF_PCI;
         rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
         rtlpriv->intf_ops = &rtl_pci_ops;
-        rtlpriv->glb_var = &global_var;
+        rtlpriv->glb_var = &rtl_global_var;
 
         /*
          *init dbgp flags before all
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index 884bceae38a9..298b615964e8 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw *hw)
 
         spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
 }
+EXPORT_SYMBOL_GPL(rtl_ips_nic_on);
 
 /*for FW LPS*/
 
@@ -518,6 +519,7 @@ void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len)
                          "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
         }
 }
+EXPORT_SYMBOL_GPL(rtl_swlps_beacon);
 
 void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
 {
@@ -611,6 +613,19 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
                         MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
 }
 
+void rtl_lps_change_work_callback(struct work_struct *work)
+{
+        struct rtl_works *rtlworks =
+            container_of(work, struct rtl_works, lps_change_work);
+        struct ieee80211_hw *hw = rtlworks->hw;
+        struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+        if (rtlpriv->enter_ps)
+                rtl_lps_enter(hw);
+        else
+                rtl_lps_leave(hw);
+}
+EXPORT_SYMBOL_GPL(rtl_lps_change_work_callback);
 
 void rtl_swlps_wq_callback(void *data)
 {
@@ -922,3 +937,4 @@ void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len)
         else
                 rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
 }
+EXPORT_SYMBOL_GPL(rtl_p2p_info);
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
index 4d682b753f50..88bd76ea88f7 100644
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -49,5 +49,6 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
 void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
 void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
 void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_lps_change_work_callback(struct work_struct *work);
 
 #endif
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index a3532e077871..e56778cac9bf 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -32,6 +32,13 @@
 #include "ps.h"
 #include "rtl8192c/fw_common.h"
 #include <linux/export.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming       <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE  <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger     <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB basic driver for rtlwifi");
 
 #define REALTEK_USB_VENQT_READ                  0xC0
 #define REALTEK_USB_VENQT_WRITE                 0x40
@@ -1070,6 +1077,8 @@ int rtl_usb_probe(struct usb_interface *intf,
         spin_lock_init(&rtlpriv->locks.usb_lock);
         INIT_WORK(&rtlpriv->works.fill_h2c_cmd,
                   rtl_fill_h2c_cmd_work_callback);
+        INIT_WORK(&rtlpriv->works.lps_change_work,
+                  rtl_lps_change_work_callback);
 
         rtlpriv->usb_data_index = 0;
         init_completion(&rtlpriv->firmware_loading_complete);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index b62d4af6c667..45e921401b06 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -361,7 +361,8 @@ struct ssb_device_id {
         __u16   vendor;
         __u16   coreid;
         __u8    revision;
-};
+        __u8    __pad;
+} __attribute__((packed, aligned(2)));
 #define SSB_DEVICE(_vendor, _coreid, _revision)  \
         { .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
 #define SSB_DEVTABLE_END  \
@@ -377,7 +378,7 @@ struct bcma_device_id {
         __u16   id;
         __u8    rev;
         __u8    class;
-};
+} __attribute__((packed,aligned(2)));
 #define BCMA_CORE(_manuf, _id, _rev, _class)  \
         { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
 #define BCMA_CORETABLE_END  \