net: phy: fix phy link up when limiting speed via device tree

When limiting phy link speed using "max-speed" to 100mbps or less on a
giga bit phy, phy never completes auto negotiation and phy state
machine is held in PHY_AN. Fixing this issue by comparing the giga
bit advertise though phydev->supported doesn't have it but phy has
BMSR_ESTATEN set. So that auto negotiation is restarted as old and
new advertise are different and link comes up fine.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 3 insertions, 2 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bdfe51fc3a65..d551df62e61a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -796,10 +796,11 @@ static int genphy_config_advert(struct phy_device *phydev)
         if (phydev->supported & (SUPPORTED_1000baseT_Half |
                                  SUPPORTED_1000baseT_Full)) {
                 adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-                if (adv != oldadv)
-                        changed = 1;
         }
 
+        if (adv != oldadv)
+                changed = 1;
+
         err = phy_write(phydev, MII_CTRL1000, adv);
         if (err < 0)
                 return err;