aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2018-03-09 11:21:55 -0500
committerArnd Bergmann <arnd@arndb.de>2018-03-26 09:57:07 -0400
commite58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e (patch)
tree84221a9f4f56ad5ee5dcf122a859dc6db56cccd7
parent47838669de9d9e1411fab9323f2ac1457d1944d2 (diff)
i2c: remove bfin-twi driver
The blackfin architecture is getting removed, so the twi driver can also be removed. Acked-by: Aaron Wu <aaron.wu@analog.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat
-rw-r--r--drivers/i2c/busses/Kconfig18
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c737
3 files changed, 0 insertions, 756 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 68ceac7617ff..4c0895165727 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -445,24 +445,6 @@ config I2C_BRCMSTB
445 445
446 If you do not need I2C interface, say N. 446 If you do not need I2C interface, say N.
447 447
448config I2C_BLACKFIN_TWI
449 tristate "Blackfin TWI I2C support"
450 depends on BLACKFIN
451 depends on !BF561 && !BF531 && !BF532 && !BF533
452 help
453 This is the I2C bus driver for Blackfin on-chip TWI interface.
454
455 This driver can also be built as a module. If so, the module
456 will be called i2c-bfin-twi.
457
458config I2C_BLACKFIN_TWI_CLK_KHZ
459 int "Blackfin TWI I2C clock (kHz)"
460 depends on I2C_BLACKFIN_TWI
461 range 21 400
462 default 50
463 help
464 The unit of the TWI clock is kHz.
465
466config I2C_CADENCE 448config I2C_CADENCE
467 tristate "Cadence I2C Controller" 449 tristate "Cadence I2C Controller"
468 depends on ARCH_ZYNQ || ARM64 || XTENSA 450 depends on ARCH_ZYNQ || ARM64 || XTENSA
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2ce8576540a2..9e475a54e36e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
38obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o 38obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
39obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o 39obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
40obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o 40obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
41obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
42obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o 41obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
43obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o 42obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
44obj-$(CONFIG_I2C_CPM) += i2c-cpm.o 43obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
deleted file mode 100644
index ff3343186a82..000000000000
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ /dev/null
@@ -1,737 +0,0 @@
1/*
2 * Blackfin On-Chip Two Wire Interface Driver
3 *
4 * Copyright 2005-2007 Analog Devices Inc.
5 *
6 * Enter bugs at http://blackfin.uclinux.org/
7 *
8 * Licensed under the GPL-2 or later.
9 */
10
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/init.h>
14#include <linux/i2c.h>
15#include <linux/slab.h>
16#include <linux/io.h>
17#include <linux/mm.h>
18#include <linux/timer.h>
19#include <linux/spinlock.h>
20#include <linux/completion.h>
21#include <linux/interrupt.h>
22#include <linux/platform_device.h>
23#include <linux/delay.h>
24
25#include <asm/irq.h>
26#include <asm/portmux.h>
27#include <asm/bfin_twi.h>
28
29/* SMBus mode*/
30#define TWI_I2C_MODE_STANDARD 1
31#define TWI_I2C_MODE_STANDARDSUB 2
32#define TWI_I2C_MODE_COMBINED 3
33#define TWI_I2C_MODE_REPEAT 4
34
35static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
36 unsigned short twi_int_status)
37{
38 unsigned short mast_stat = read_MASTER_STAT(iface);
39
40 if (twi_int_status & XMTSERV) {
41 if (iface->writeNum <= 0) {
42 /* start receive immediately after complete sending in
43 * combine mode.
44 */
45 if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
46 write_MASTER_CTL(iface,
47 read_MASTER_CTL(iface) | MDIR);
48 else if (iface->manual_stop)
49 write_MASTER_CTL(iface,
50 read_MASTER_CTL(iface) | STOP);
51 else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
52 iface->cur_msg + 1 < iface->msg_num) {
53 if (iface->pmsg[iface->cur_msg + 1].flags &
54 I2C_M_RD)
55 write_MASTER_CTL(iface,
56 read_MASTER_CTL(iface) |
57 MDIR);
58 else
59 write_MASTER_CTL(iface,
60 read_MASTER_CTL(iface) &
61 ~MDIR);
62 }
63 }
64 /* Transmit next data */
65 while (iface->writeNum > 0 &&
66 (read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
67 write_XMT_DATA8(iface, *(iface->transPtr++));
68 iface->writeNum--;
69 }
70 }
71 if (twi_int_status & RCVSERV) {
72 while (iface->readNum > 0 &&
73 (read_FIFO_STAT(iface) & RCVSTAT)) {
74 /* Receive next data */
75 *(iface->transPtr) = read_RCV_DATA8(iface);
76 if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
77 /* Change combine mode into sub mode after
78 * read first data.
79 */
80 iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
81 /* Get read number from first byte in block
82 * combine mode.
83 */
84 if (iface->readNum == 1 && iface->manual_stop)
85 iface->readNum = *iface->transPtr + 1;
86 }
87 iface->transPtr++;
88 iface->readNum--;
89 }
90
91 if (iface->readNum == 0) {
92 if (iface->manual_stop) {
93 /* Temporary workaround to avoid possible bus stall -
94 * Flush FIFO before issuing the STOP condition
95 */
96 read_RCV_DATA16(iface);
97 write_MASTER_CTL(iface,
98 read_MASTER_CTL(iface) | STOP);
99 } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
100 iface->cur_msg + 1 < iface->msg_num) {
101 if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
102 write_MASTER_CTL(iface,
103 read_MASTER_CTL(iface) | MDIR);
104 else
105 write_MASTER_CTL(iface,
106 read_MASTER_CTL(iface) & ~MDIR);
107 }
108 }
109 }
110 if (twi_int_status & MERR) {
111 write_INT_MASK(iface, 0);
112 write_MASTER_STAT(iface, 0x3e);
113 write_MASTER_CTL(iface, 0);
114 iface->result = -EIO;
115
116 if (mast_stat & LOSTARB)
117 dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
118 if (mast_stat & ANAK)
119 dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
120 if (mast_stat & DNAK)
121 dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
122 if (mast_stat & BUFRDERR)
123 dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
124 if (mast_stat & BUFWRERR)
125 dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
126
127 /* Faulty slave devices, may drive SDA low after a transfer
128 * finishes. To release the bus this code generates up to 9
129 * extra clocks until SDA is released.
130 */
131
132 if (read_MASTER_STAT(iface) & SDASEN) {
133 int cnt = 9;
134 do {
135 write_MASTER_CTL(iface, SCLOVR);
136 udelay(6);
137 write_MASTER_CTL(iface, 0);
138 udelay(6);
139 } while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
140
141 write_MASTER_CTL(iface, SDAOVR | SCLOVR);
142 udelay(6);
143 write_MASTER_CTL(iface, SDAOVR);
144 udelay(6);
145 write_MASTER_CTL(iface, 0);
146 }
147
148 /* If it is a quick transfer, only address without data,
149 * not an err, return 1.
150 */
151 if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
152 iface->transPtr == NULL &&
153 (twi_int_status & MCOMP) && (mast_stat & DNAK))
154 iface->result = 1;
155
156 complete(&iface->complete);
157 return;
158 }
159 if (twi_int_status & MCOMP) {
160 if (twi_int_status & (XMTSERV | RCVSERV) &&
161 (read_MASTER_CTL(iface) & MEN) == 0 &&
162 (iface->cur_mode == TWI_I2C_MODE_REPEAT ||
163 iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
164 iface->result = -1;
165 write_INT_MASK(iface, 0);
166 write_MASTER_CTL(iface, 0);
167 } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
168 if (iface->readNum == 0) {
169 /* set the read number to 1 and ask for manual
170 * stop in block combine mode
171 */
172 iface->readNum = 1;
173 iface->manual_stop = 1;
174 write_MASTER_CTL(iface,
175 read_MASTER_CTL(iface) | (0xff << 6));
176 } else {
177 /* set the readd number in other
178 * combine mode.
179 */
180 write_MASTER_CTL(iface,
181 (read_MASTER_CTL(iface) &
182 (~(0xff << 6))) |
183 (iface->readNum << 6));
184 }
185 /* remove restart bit and enable master receive */
186 write_MASTER_CTL(iface,
187 read_MASTER_CTL(iface) & ~RSTART);
188 } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
189 iface->cur_msg + 1 < iface->msg_num) {
190 iface->cur_msg++;
191 iface->transPtr = iface->pmsg[iface->cur_msg].buf;
192 iface->writeNum = iface->readNum =
193 iface->pmsg[iface->cur_msg].len;
194 /* Set Transmit device address */
195 write_MASTER_ADDR(iface,
196 iface->pmsg[iface->cur_msg].addr);
197 if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
198 iface->read_write = I2C_SMBUS_READ;
199 else {
200 iface->read_write = I2C_SMBUS_WRITE;
201 /* Transmit first data */
202 if (iface->writeNum > 0) {
203 write_XMT_DATA8(iface,
204 *(iface->transPtr++));
205 iface->writeNum--;
206 }
207 }
208
209 if (iface->pmsg[iface->cur_msg].len <= 255) {
210 write_MASTER_CTL(iface,
211 (read_MASTER_CTL(iface) &
212 (~(0xff << 6))) |
213 (iface->pmsg[iface->cur_msg].len << 6));
214 iface->manual_stop = 0;
215 } else {
216 write_MASTER_CTL(iface,
217 (read_MASTER_CTL(iface) |
218 (0xff << 6)));
219 iface->manual_stop = 1;
220 }
221 /* remove restart bit before last message */
222 if (iface->cur_msg + 1 == iface->msg_num)
223 write_MASTER_CTL(iface,
224 read_MASTER_CTL(iface) & ~RSTART);
225 } else {
226 iface->result = 1;
227 write_INT_MASK(iface, 0);
228 write_MASTER_CTL(iface, 0);
229 }
230 complete(&iface->complete);
231 }
232}
233
234/* Interrupt handler */
235static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
236{
237 struct bfin_twi_iface *iface = dev_id;
238 unsigned long flags;
239 unsigned short twi_int_status;
240
241 spin_lock_irqsave(&iface->lock, flags);
242 while (1) {
243 twi_int_status = read_INT_STAT(iface);
244 if (!twi_int_status)
245 break;
246 /* Clear interrupt status */
247 write_INT_STAT(iface, twi_int_status);
248 bfin_twi_handle_interrupt(iface, twi_int_status);
249 }
250 spin_unlock_irqrestore(&iface->lock, flags);
251 return IRQ_HANDLED;
252}
253
254/*
255 * One i2c master transfer
256 */
257static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
258 struct i2c_msg *msgs, int num)
259{
260 struct bfin_twi_iface *iface = adap->algo_data;
261 struct i2c_msg *pmsg;
262 int rc = 0;
263
264 if (!(read_CONTROL(iface) & TWI_ENA))
265 return -ENXIO;
266
267 if (read_MASTER_STAT(iface) & BUSBUSY)
268 return -EAGAIN;
269
270 iface->pmsg = msgs;
271 iface->msg_num = num;
272 iface->cur_msg = 0;
273
274 pmsg = &msgs[0];
275 if (pmsg->flags & I2C_M_TEN) {
276 dev_err(&adap->dev, "10 bits addr not supported!\n");
277 return -EINVAL;
278 }
279
280 if (iface->msg_num > 1)
281 iface->cur_mode = TWI_I2C_MODE_REPEAT;
282 iface->manual_stop = 0;
283 iface->transPtr = pmsg->buf;
284 iface->writeNum = iface->readNum = pmsg->len;
285 iface->result = 0;
286 init_completion(&(iface->complete));
287 /* Set Transmit device address */
288 write_MASTER_ADDR(iface, pmsg->addr);
289
290 /* FIFO Initiation. Data in FIFO should be
291 * discarded before start a new operation.
292 */
293 write_FIFO_CTL(iface, 0x3);
294 write_FIFO_CTL(iface, 0);
295
296 if (pmsg->flags & I2C_M_RD)
297 iface->read_write = I2C_SMBUS_READ;
298 else {
299 iface->read_write = I2C_SMBUS_WRITE;
300 /* Transmit first data */
301 if (iface->writeNum > 0) {
302 write_XMT_DATA8(iface, *(iface->transPtr++));
303 iface->writeNum--;
304 }
305 }
306
307 /* clear int stat */
308 write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
309
310 /* Interrupt mask . Enable XMT, RCV interrupt */
311 write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
312
313 if (pmsg->len <= 255)
314 write_MASTER_CTL(iface, pmsg->len << 6);
315 else {
316 write_MASTER_CTL(iface, 0xff << 6);
317 iface->manual_stop = 1;
318 }
319
320 /* Master enable */
321 write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
322 (iface->msg_num > 1 ? RSTART : 0) |
323 ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
324 ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
325
326 while (!iface->result) {
327 if (!wait_for_completion_timeout(&iface->complete,
328 adap->timeout)) {
329 iface->result = -1;
330 dev_err(&adap->dev, "master transfer timeout\n");
331 }
332 }
333
334 if (iface->result == 1)
335 rc = iface->cur_msg + 1;
336 else
337 rc = iface->result;
338
339 return rc;
340}
341
342/*
343 * Generic i2c master transfer entrypoint
344 */
345static int bfin_twi_master_xfer(struct i2c_adapter *adap,
346 struct i2c_msg *msgs, int num)
347{
348 return bfin_twi_do_master_xfer(adap, msgs, num);
349}
350
351/*
352 * One I2C SMBus transfer
353 */
354int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
355 unsigned short flags, char read_write,
356 u8 command, int size, union i2c_smbus_data *data)
357{
358 struct bfin_twi_iface *iface = adap->algo_data;
359 int rc = 0;
360
361 if (!(read_CONTROL(iface) & TWI_ENA))
362 return -ENXIO;
363
364 if (read_MASTER_STAT(iface) & BUSBUSY)
365 return -EAGAIN;
366
367 iface->writeNum = 0;
368 iface->readNum = 0;
369
370 /* Prepare datas & select mode */
371 switch (size) {
372 case I2C_SMBUS_QUICK:
373 iface->transPtr = NULL;
374 iface->cur_mode = TWI_I2C_MODE_STANDARD;
375 break;
376 case I2C_SMBUS_BYTE:
377 if (data == NULL)
378 iface->transPtr = NULL;
379 else {
380 if (read_write == I2C_SMBUS_READ)
381 iface->readNum = 1;
382 else
383 iface->writeNum = 1;
384 iface->transPtr = &data->byte;
385 }
386 iface->cur_mode = TWI_I2C_MODE_STANDARD;
387 break;
388 case I2C_SMBUS_BYTE_DATA:
389 if (read_write == I2C_SMBUS_READ) {
390 iface->readNum = 1;
391 iface->cur_mode = TWI_I2C_MODE_COMBINED;
392 } else {
393 iface->writeNum = 1;
394 iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
395 }
396 iface->transPtr = &data->byte;
397 break;
398 case I2C_SMBUS_WORD_DATA:
399 if (read_write == I2C_SMBUS_READ) {
400 iface->readNum = 2;
401 iface->cur_mode = TWI_I2C_MODE_COMBINED;
402 } else {
403 iface->writeNum = 2;
404 iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
405 }
406 iface->transPtr = (u8 *)&data->word;
407 break;
408 case I2C_SMBUS_PROC_CALL:
409 iface->writeNum = 2;
410 iface->readNum = 2;
411 iface->cur_mode = TWI_I2C_MODE_COMBINED;
412 iface->transPtr = (u8 *)&data->word;
413 break;
414 case I2C_SMBUS_BLOCK_DATA:
415 if (read_write == I2C_SMBUS_READ) {
416 iface->readNum = 0;
417 iface->cur_mode = TWI_I2C_MODE_COMBINED;
418 } else {
419 iface->writeNum = data->block[0] + 1;
420 iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
421 }
422 iface->transPtr = data->block;
423 break;
424 case I2C_SMBUS_I2C_BLOCK_DATA:
425 if (read_write == I2C_SMBUS_READ) {
426 iface->readNum = data->block[0];
427 iface->cur_mode = TWI_I2C_MODE_COMBINED;
428 } else {
429 iface->writeNum = data->block[0];
430 iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
431 }
432 iface->transPtr = (u8 *)&data->block[1];
433 break;
434 default:
435 return -1;
436 }
437
438 iface->result = 0;
439 iface->manual_stop = 0;
440 iface->read_write = read_write;
441 iface->command = command;
442 init_completion(&(iface->complete));
443
444 /* FIFO Initiation. Data in FIFO should be discarded before
445 * start a new operation.
446 */
447 write_FIFO_CTL(iface, 0x3);
448 write_FIFO_CTL(iface, 0);
449
450 /* clear int stat */
451 write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
452
453 /* Set Transmit device address */
454 write_MASTER_ADDR(iface, addr);
455
456 switch (iface->cur_mode) {
457 case TWI_I2C_MODE_STANDARDSUB:
458 write_XMT_DATA8(iface, iface->command);
459 write_INT_MASK(iface, MCOMP | MERR |
460 ((iface->read_write == I2C_SMBUS_READ) ?
461 RCVSERV : XMTSERV));
462
463 if (iface->writeNum + 1 <= 255)
464 write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
465 else {
466 write_MASTER_CTL(iface, 0xff << 6);
467 iface->manual_stop = 1;
468 }
469 /* Master enable */
470 write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
471 ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
472 break;
473 case TWI_I2C_MODE_COMBINED:
474 write_XMT_DATA8(iface, iface->command);
475 write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
476
477 if (iface->writeNum > 0)
478 write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
479 else
480 write_MASTER_CTL(iface, 0x1 << 6);
481 /* Master enable */
482 write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
483 ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
484 break;
485 default:
486 write_MASTER_CTL(iface, 0);
487 if (size != I2C_SMBUS_QUICK) {
488 /* Don't access xmit data register when this is a
489 * read operation.
490 */
491 if (iface->read_write != I2C_SMBUS_READ) {
492 if (iface->writeNum > 0) {
493 write_XMT_DATA8(iface,
494 *(iface->transPtr++));
495 if (iface->writeNum <= 255)
496 write_MASTER_CTL(iface,
497 iface->writeNum << 6);
498 else {
499 write_MASTER_CTL(iface,
500 0xff << 6);
501 iface->manual_stop = 1;
502 }
503 iface->writeNum--;
504 } else {
505 write_XMT_DATA8(iface, iface->command);
506 write_MASTER_CTL(iface, 1 << 6);
507 }
508 } else {
509 if (iface->readNum > 0 && iface->readNum <= 255)
510 write_MASTER_CTL(iface,
511 iface->readNum << 6);
512 else if (iface->readNum > 255) {
513 write_MASTER_CTL(iface, 0xff << 6);
514 iface->manual_stop = 1;
515 } else
516 break;
517 }
518 }
519 write_INT_MASK(iface, MCOMP | MERR |
520 ((iface->read_write == I2C_SMBUS_READ) ?
521 RCVSERV : XMTSERV));
522
523 /* Master enable */
524 write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
525 ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
526 ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
527 break;
528 }
529
530 while (!iface->result) {
531 if (!wait_for_completion_timeout(&iface->complete,
532 adap->timeout)) {
533 iface->result = -1;
534 dev_err(&adap->dev, "smbus transfer timeout\n");
535 }
536 }
537
538 rc = (iface->result >= 0) ? 0 : -1;
539
540 return rc;
541}
542
543/*
544 * Generic I2C SMBus transfer entrypoint
545 */
546int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
547 unsigned short flags, char read_write,
548 u8 command, int size, union i2c_smbus_data *data)
549{
550 return bfin_twi_do_smbus_xfer(adap, addr, flags,
551 read_write, command, size, data);
552}
553
554/*
555 * Return what the adapter supports
556 */
557static u32 bfin_twi_functionality(struct i2c_adapter *adap)
558{
559 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
560 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
561 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
562 I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
563}
564
565static const struct i2c_algorithm bfin_twi_algorithm = {
566 .master_xfer = bfin_twi_master_xfer,
567 .smbus_xfer = bfin_twi_smbus_xfer,
568 .functionality = bfin_twi_functionality,
569};
570
571#ifdef CONFIG_PM_SLEEP
572static int i2c_bfin_twi_suspend(struct device *dev)
573{
574 struct bfin_twi_iface *iface = dev_get_drvdata(dev);
575
576 iface->saved_clkdiv = read_CLKDIV(iface);
577 iface->saved_control = read_CONTROL(iface);
578
579 free_irq(iface->irq, iface);
580
581 /* Disable TWI */
582 write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
583
584 return 0;
585}
586
587static int i2c_bfin_twi_resume(struct device *dev)
588{
589 struct bfin_twi_iface *iface = dev_get_drvdata(dev);
590
591 int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
592 0, to_platform_device(dev)->name, iface);
593 if (rc) {
594 dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
595 return -ENODEV;
596 }
597
598 /* Resume TWI interface clock as specified */
599 write_CLKDIV(iface, iface->saved_clkdiv);
600
601 /* Resume TWI */
602 write_CONTROL(iface, iface->saved_control);
603
604 return 0;
605}
606
607static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
608 i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
609#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
610#else
611#define I2C_BFIN_TWI_PM_OPS NULL
612#endif
613
614static int i2c_bfin_twi_probe(struct platform_device *pdev)
615{
616 struct bfin_twi_iface *iface;
617 struct i2c_adapter *p_adap;
618 struct resource *res;
619 int rc;
620 unsigned int clkhilow;
621
622 iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
623 GFP_KERNEL);
624 if (!iface) {
625 dev_err(&pdev->dev, "Cannot allocate memory\n");
626 return -ENOMEM;
627 }
628
629 spin_lock_init(&(iface->lock));
630
631 /* Find and map our resources */
632 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
633 iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
634 if (IS_ERR(iface->regs_base)) {
635 dev_err(&pdev->dev, "Cannot map IO\n");
636 return PTR_ERR(iface->regs_base);
637 }
638
639 iface->irq = platform_get_irq(pdev, 0);
640 if (iface->irq < 0) {
641 dev_err(&pdev->dev, "No IRQ specified\n");
642 return -ENOENT;
643 }
644
645 p_adap = &iface->adap;
646 p_adap->nr = pdev->id;
647 strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
648 p_adap->algo = &bfin_twi_algorithm;
649 p_adap->algo_data = iface;
650 p_adap->class = I2C_CLASS_DEPRECATED;
651 p_adap->dev.parent = &pdev->dev;
652 p_adap->timeout = 5 * HZ;
653 p_adap->retries = 3;
654
655 rc = peripheral_request_list(
656 dev_get_platdata(&pdev->dev),
657 "i2c-bfin-twi");
658 if (rc) {
659 dev_err(&pdev->dev, "Can't setup pin mux!\n");
660 return -EBUSY;
661 }
662
663 rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
664 0, pdev->name, iface);
665 if (rc) {
666 dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
667 rc = -ENODEV;
668 goto out_error;
669 }
670
671 /* Set TWI internal clock as 10MHz */
672 write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
673
674 /*
675 * We will not end up with a CLKDIV=0 because no one will specify
676 * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
677 */
678 clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
679
680 /* Set Twi interface clock as specified */
681 write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
682
683 /* Enable TWI */
684 write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
685
686 rc = i2c_add_numbered_adapter(p_adap);
687 if (rc < 0)
688 goto out_error;
689
690 platform_set_drvdata(pdev, iface);
691
692 dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
693 "regs_base@%p\n", iface->regs_base);
694
695 return 0;
696
697out_error:
698 peripheral_free_list(dev_get_platdata(&pdev->dev));
699 return rc;
700}
701
702static int i2c_bfin_twi_remove(struct platform_device *pdev)
703{
704 struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
705
706 i2c_del_adapter(&(iface->adap));
707 peripheral_free_list(dev_get_platdata(&pdev->dev));
708
709 return 0;
710}
711
712static struct platform_driver i2c_bfin_twi_driver = {
713 .probe = i2c_bfin_twi_probe,
714 .remove = i2c_bfin_twi_remove,
715 .driver = {
716 .name = "i2c-bfin-twi",
717 .pm = I2C_BFIN_TWI_PM_OPS,
718 },
719};
720
721static int __init i2c_bfin_twi_init(void)
722{
723 return platform_driver_register(&i2c_bfin_twi_driver);
724}
725
726static void __exit i2c_bfin_twi_exit(void)
727{
728 platform_driver_unregister(&i2c_bfin_twi_driver);
729}
730
731subsys_initcall(i2c_bfin_twi_init);
732module_exit(i2c_bfin_twi_exit);
733
734MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
735MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
736MODULE_LICENSE("GPL");
737MODULE_ALIAS("platform:i2c-bfin-twi");
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-27 15:30:21 -0400