ARM: dts: exynos: Move pmu and timer nodes out of soc

The ARM PMU and ARM architected timer nodes are part of ARM CPU design
therefore they should not be inside the soc node.  This also fixes DTC
W=1 warnings like:

    arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5:
        Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
    arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5:
        Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

4 files changed, 51 insertions, 51 deletions

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 5892a9f7622f..af54b306204b 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,6 +97,12 @@
                 };
         };
 
+        pmu {
+                compatible = "arm,cortex-a7-pmu";
+                interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
         soc: soc {
                 compatible = "simple-bus";
                 #address-cells = <1>;
@@ -673,12 +679,6 @@
                         status = "disabled";
                 };
 
-                pmu {
-                        compatible = "arm,cortex-a7-pmu";
-                        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-                };
-
                 ppmu_dmc0: ppmu_dmc0@106a0000 {
                         compatible = "samsung,exynos-ppmu";
                         reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 6085e92ac2d7..1c21627e3c3c 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -51,6 +51,12 @@
                 serial3 = &serial_3;
         };
 
+        pmu: pmu {
+                compatible = "arm,cortex-a9-pmu";
+                interrupt-parent = <&combiner>;
+                interrupts = <2 2>, <3 2>;
+        };
+
         soc: soc {
                 compatible = "simple-bus";
                 #address-cells = <1>;
@@ -169,12 +175,6 @@
                         reg = <0x10440000 0x1000>;
                 };
 
-                pmu: pmu {
-                        compatible = "arm,cortex-a9-pmu";
-                        interrupt-parent = <&combiner>;
-                        interrupts = <2 2>, <3 2>;
-                };
-
                 sys_reg: syscon@10010000 {
                         compatible = "samsung,exynos4-sysreg", "syscon";
                         reg = <0x10010000 0x400>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 80986b97dfe5..d5e0392b409e 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -157,6 +157,12 @@
                 };
         };
 
+        pmu {
+                compatible = "arm,cortex-a15-pmu";
+                interrupt-parent = <&combiner>;
+                interrupts = <1 2>, <22 4>;
+        };
+
         soc: soc {
                 sysram@2020000 {
                         compatible = "mmio-sram";
@@ -227,20 +233,6 @@
                         power-domains = <&pd_mau>;
                 };
 
-                timer {
-                        compatible = "arm,armv7-timer";
-                        interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                                     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                                     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-                                     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-                        /*
-                         * Unfortunately we need this since some versions
-                         * of U-Boot on Exynos don't set the CNTFRQ register,
-                         * so we need the value from DT.
-                         */
-                        clock-frequency = <24000000>;
-                };
-
                 mct@101c0000 {
                         compatible = "samsung,exynos4210-mct";
                         reg = <0x101C0000 0x800>;
@@ -265,12 +257,6 @@
                         };
                 };
 
-                pmu {
-                        compatible = "arm,cortex-a15-pmu";
-                        interrupt-parent = <&combiner>;
-                        interrupts = <1 2>, <22 4>;
-                };
-
                 pinctrl_0: pinctrl@11400000 {
                         compatible = "samsung,exynos5250-pinctrl";
                         reg = <0x11400000 0x1000>;
@@ -1097,6 +1083,20 @@
                        };
                 };
         };
+
+        timer {
+                compatible = "arm,armv7-timer";
+                interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                             <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                             <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                             <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+                /*
+                 * Unfortunately we need this since some versions
+                 * of U-Boot on Exynos don't set the CNTFRQ register,
+                 * so we need the value from DT.
+                 */
+                clock-frequency = <24000000>;
+        };
 };
 
 &dp {
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index de26e5ee0d2d..ae866bcc30c4 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -25,27 +25,27 @@
                 usbdrdphy1 = &usbdrd_phy1;
         };
 
-        soc: soc {
-                arm_a7_pmu: arm-a7-pmu {
-                        compatible = "arm,cortex-a7-pmu";
-                        interrupt-parent = <&gic>;
-                        interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-                        status = "disabled";
-                };
+        arm_a7_pmu: arm-a7-pmu {
+                compatible = "arm,cortex-a7-pmu";
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+                status = "disabled";
+        };
 
-                arm_a15_pmu: arm-a15-pmu {
-                        compatible = "arm,cortex-a15-pmu";
-                        interrupt-parent = <&combiner>;
-                        interrupts = <1 2>,
-                                     <7 0>,
-                                     <16 6>,
-                                     <19 2>;
-                        status = "disabled";
-                };
+        arm_a15_pmu: arm-a15-pmu {
+                compatible = "arm,cortex-a15-pmu";
+                interrupt-parent = <&combiner>;
+                interrupts = <1 2>,
+                             <7 0>,
+                             <16 6>,
+                             <19 2>;
+                status = "disabled";
+        };
 
+        soc: soc {
                 sysram@2020000 {
                         compatible = "mmio-sram";
                         reg = <0x02020000 0x54000>;