regulator: s2mps11: Don't check enable_shift before setting enable ramp rate

Current code misses updating the register when enable_shift is 0.
e.g. S2MPS11_BUCK9_RAMP_SHIFT and S2MPS11_BUCK6_RAMP_EN_SHIFT are 0.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 5 insertions, 7 deletions

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 68fd54702edb..e713c162fbd4 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -202,13 +202,11 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
         if (!ramp_enable)
                 goto ramp_disable;
 
-        if (enable_shift) {
-                ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
-                                        1 << enable_shift, 1 << enable_shift);
-                if (ret) {
-                        dev_err(&rdev->dev, "failed to enable ramp rate\n");
-                        return ret;
-                }
+        ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
+                                 1 << enable_shift, 1 << enable_shift);
+        if (ret) {
+                dev_err(&rdev->dev, "failed to enable ramp rate\n");
+                return ret;
         }
 
         ramp_val = get_ramp_delay(ramp_delay);