ARM: dts: exynos: Remove double SD card detect pin inversion

The SDHCI standard, MMC host controller bindings and MMC core defines
card detect pin as active low.  Therefore there is no point to invert it
twice.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

3 files changed, 3 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 40e65a28a8ca..5c3d98654f13 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -545,8 +545,7 @@
         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
         pinctrl-names = "default";
         vmmc-supply = <&ldo5_reg>;
-        cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-        cd-inverted;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
         status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index c0476c290977..aed2f2e2b0d1 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -1269,8 +1269,7 @@
 
 &sdhci_2 {
         bus-width = <4>;
-        cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-        cd-inverted;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
         pinctrl-names = "default";
         vmmc-supply = <&ldo21_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index a09e46c9dbc0..2caa3132f34e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -539,8 +539,7 @@
         pinctrl-names = "default";
         vmmc-supply = <&ldo21_reg>;
         vqmmc-supply = <&ldo4_reg>;
-        cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
-        cd-inverted;
+        cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
         status = "okay";
 };