ARM: dts: at91: sama5d2_xplained: enable ADTRG pin

Enable pinctrl for ADTRG pin (PD31) for ADC hardware trigger support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

1 files changed, 15 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index c7e9ccf2bc87..cbc26001247b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -309,7 +309,7 @@
                                 vddana-supply = <&vdd_3v3_lp_reg>;
                                 vref-supply = <&vdd_3v3_lp_reg>;
                                 pinctrl-names = "default";
-                                pinctrl-0 = <&pinctrl_adc_default>;
+                                pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
                                 status = "okay";
                         };
 
@@ -340,6 +340,20 @@
                                         bias-disable;
                                 };
 
+                                /*
+                                 * The ADTRG pin can work on any edge type.
+                                 * In here it's being pulled up, so need to
+                                 * connect it to ground to get an edge e.g.
+                                 * Trigger can be configured on falling, rise
+                                 * or any edge, and the pull-up can be changed
+                                 * to pull-down or left floating according to
+                                 * needs.
+                                 */
+                                pinctrl_adtrg_default: adtrg_default {
+                                        pinmux = <PIN_PD31__ADTRG>;
+                                        bias-pull-up;
+                                };
+
                                 pinctrl_charger_chglev: charger_chglev {
                                         pinmux = <PIN_PA12__GPIO>;
                                         bias-disable;