aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPatrice Chotard <patrice.chotard@st.com>2016-08-15 08:17:00 -0400
committerPatrice Chotard <patrice.chotard@st.com>2016-09-02 09:15:06 -0400
commit76c1c9cf3659057fabbe8a18e04a2121c5d3b433 (patch)
treea91d15566cb35dd5f05a770ab5133182f692b8d6
parentecb8af45906526f019e88a1de3b1052f13cc7951 (diff)
ARM: dts: STi: Introduce B2260 board
B2260 board is the STMicroelectronics 96Board based on STiH410 soc : - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - Sata - HDMI - 2 x USB2 type A - micro USB2 type AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/stih410-b2260.dts190
2 files changed, 191 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52370d2..f23a5b375f17 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -686,6 +686,7 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
686dtb-$(CONFIG_ARCH_STI) += \ 686dtb-$(CONFIG_ARCH_STI) += \
687 stih407-b2120.dtb \ 687 stih407-b2120.dtb \
688 stih410-b2120.dtb \ 688 stih410-b2120.dtb \
689 stih410-b2260.dtb \
689 stih415-b2000.dtb \ 690 stih415-b2000.dtb \
690 stih415-b2020.dtb \ 691 stih415-b2020.dtb \
691 stih416-b2000.dtb \ 692 stih416-b2000.dtb \
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
new file mode 100644
index 000000000000..94e064f193b2
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -0,0 +1,190 @@
1/*
2 * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
3 * Author: Patrice Chotard <patrice.chotard@st.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
9/dts-v1/;
10#include "stih410.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "STiH410 B2260";
15 compatible = "st,stih410-b2260", "st,stih410";
16
17 chosen {
18 bootargs = "console=ttyAS1,115200";
19 linux,stdout-path = &uart1;
20 };
21
22 memory {
23 device_type = "memory";
24 reg = <0x40000000 0x40000000>;
25 };
26
27 aliases {
28 ttyAS1 = &uart1;
29 ethernet0 = &ethernet0;
30 };
31
32 soc {
33
34 leds {
35 compatible = "gpio-leds";
36 user_green_1 {
37 label = "User_green_1";
38 gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
39 linux,default-trigger = "heartbeat";
40 default-state = "off";
41 };
42
43 user_green_2 {
44 label = "User_green_2";
45 gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
46 default-state = "off";
47 };
48
49 user_green_3 {
50 label = "User_green_3";
51 gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
52 default-state = "off";
53 };
54
55 user_green_4 {
56 label = "User_green_4";
57 gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
58 default-state = "off";
59 };
60 };
61
62 /* Low speed expansion connector */
63 uart0: serial@9830000 {
64 label = "LS-UART0";
65 status = "okay";
66 };
67
68 /* Low speed expansion connector */
69 uart1: serial@9831000 {
70 label = "LS-UART1";
71 status = "okay";
72 };
73
74 /* Low speed expansion connector */
75 spi0: spi@9844000 {
76 label = "LS-SPI0";
77 cs-gpio = <&pio30 3 0>;
78 status = "okay";
79 };
80
81 /* Low speed expansion connector */
82 i2c0: i2c@9840000 {
83 label = "LS-I2C0";
84 status = "okay";
85 };
86
87 /* Low speed expansion connector */
88 i2c1: i2c@9841000 {
89 label = "LS-I2C1";
90 status = "okay";
91 };
92
93 /* high speed expansion connector */
94 i2c2: i2c@9842000 {
95 label = "HS-I2C2";
96 pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
97 status = "okay";
98 };
99
100 /* high speed expansion connector */
101 i2c3: i2c@9843000 {
102 label = "HS-I2C3";
103 pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
104 status = "okay";
105 };
106
107 mmc0: sdhci@09060000 {
108 pinctrl-0 = <&pinctrl_sd0>;
109 bus-width = <4>;
110 status = "okay";
111 };
112
113 /* high speed expansion connector */
114 mmc1: sdhci@09080000 {
115 status = "okay";
116 };
117
118 pwm0: pwm@9810000 {
119 status = "okay";
120 };
121
122 pwm1: pwm@9510000 {
123 status = "okay";
124 };
125
126 usb2_picophy1: phy2 {
127 status = "okay";
128 };
129
130 usb2_picophy2: phy3 {
131 status = "okay";
132 };
133
134 ohci0: usb@9a03c00 {
135 status = "okay";
136 };
137
138 ehci0: usb@9a03e00 {
139 status = "okay";
140 };
141
142 ohci1: usb@9a83c00 {
143 status = "okay";
144 };
145
146 ehci1: usb@9a83e00 {
147 status = "okay";
148 };
149
150 ethernet0: dwmac@9630000 {
151 phy-mode = "rgmii";
152 pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
153
154 snps,phy-bus-name = "stmmac";
155 snps,phy-bus-id = <0>;
156 snps,phy-addr = <0>;
157 snps,reset-gpio = <&pio0 7 0>;
158 snps,reset-active-low;
159 snps,reset-delays-us = <0 10000 1000000>;
160
161 status = "okay";
162 };
163
164 /* SSC11 to HDMI */
165 hdmiddc: i2c@9541000 {
166 /* HDMI V1.3a supports Standard mode only */
167 clock-frequency = <100000>;
168 st,i2c-min-scl-pulse-width-us = <0>;
169 st,i2c-min-sda-pulse-width-us = <5>;
170 status = "okay";
171 };
172
173 sti-display-subsystem {
174 sti_hdmi: sti-hdmi@8d04000 {
175 status = "okay";
176 };
177 };
178
179 miphy28lp_phy: miphy28lp@9b22000 {
180
181 phy_port1: port@9b2a000 {
182 st,osc-force-ext;
183 };
184 };
185
186 sata1: sata@9b28000 {
187 status = "okay";
188 };
189 };
190};