aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAdam Ford <aford173@gmail.com>2017-11-30 06:46:50 -0500
committerTony Lindgren <tony@atomide.com>2017-12-11 12:43:49 -0500
commit739f85bba5ab75e053a7da5f06d4944722782a21 (patch)
tree1d0dc6580e25c5b23f164226443e287d522e9508
parentf8a2e3ff7103ed98016ba2dbea0c475edef2879f (diff)
ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard
The Development kits consist of a SOM connected to a baseboard. Moving most of the devkit files to baseboard allow us to re-use much of the contents in preparation for using it on the OMAP35xx varation of the same kit. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts389
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi395
2 files changed, 396 insertions, 388 deletions
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index b4575bbaf085..b5404f0a80b4 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -9,396 +9,9 @@
9#include "omap36xx.dtsi" 9#include "omap36xx.dtsi"
10#include "logicpd-torpedo-som.dtsi" 10#include "logicpd-torpedo-som.dtsi"
11#include "omap-gpmc-smsc9221.dtsi" 11#include "omap-gpmc-smsc9221.dtsi"
12#include "logicpd-torpedo-baseboard.dtsi"
12 13
13/ { 14/ {
14 model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; 15 model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
15 compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; 16 compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
16
17 gpio_keys {
18 compatible = "gpio-keys";
19 pinctrl-names = "default";
20 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
21
22 sysboot2 {
23 label = "sysboot2";
24 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
25 linux,code = <BTN_0>;
26 wakeup-source;
27 };
28
29 sysboot5 {
30 label = "sysboot5";
31 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
32 linux,code = <BTN_1>;
33 wakeup-source;
34 };
35
36 gpio1 {
37 label = "gpio1";
38 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
39 linux,code = <BTN_2>;
40 wakeup-source;
41 };
42
43 gpio2 {
44 label = "gpio2";
45 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
46 linux,code = <BTN_3>;
47 wakeup-source;
48 };
49 };
50
51 sound {
52 compatible = "ti,omap-twl4030";
53 ti,model = "omap3logic";
54 ti,mcbsp = <&mcbsp2>;
55 };
56
57 leds {
58 compatible = "gpio-leds";
59 pinctrl-names = "default";
60 pinctrl-0 = <&led_pins>;
61
62 led1 {
63 label = "led1";
64 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
65 linux,default-trigger = "cpu0";
66 };
67
68 led2 {
69 label = "led2";
70 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
71 linux,default-trigger = "none";
72 };
73 };
74
75 pwm10: dmtimer-pwm {
76 compatible = "ti,omap-dmtimer-pwm";
77 pinctrl-names = "default";
78 pinctrl-0 = <&pwm_pins>;
79 ti,timers = <&timer10>;
80 #pwm-cells = <3>;
81 };
82
83};
84
85&vaux1 {
86 regulator-min-microvolt = <3000000>;
87 regulator-max-microvolt = <3000000>;
88};
89
90&vaux4 {
91 regulator-min-microvolt = <1800000>;
92 regulator-max-microvolt = <1800000>;
93};
94
95&mcbsp2 {
96 status = "okay";
97};
98
99&charger {
100 ti,bb-uvolt = <3200000>;
101 ti,bb-uamp = <150>;
102};
103
104&gpmc {
105 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
106 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
107
108 ethernet@gpmc {
109 pinctrl-names = "default";
110 pinctrl-0 = <&lan9221_pins>;
111 interrupt-parent = <&gpio5>;
112 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
113 reg = <1 0 0xff>;
114 };
115};
116
117&vpll2 {
118 regulator-always-on;
119};
120
121&dss {
122 status = "ok";
123 vdds_dsi-supply = <&vpll2>;
124 vdda_video-supply = <&video_reg>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&dss_dpi_pins1>;
127 port {
128 dpi_out: endpoint {
129 remote-endpoint = <&lcd_in>;
130 data-lines = <16>;
131 };
132 };
133};
134
135/ {
136 aliases {
137 display0 = &lcd0;
138 };
139
140 video_reg: video_reg {
141 pinctrl-names = "default";
142 pinctrl-0 = <&panel_pwr_pins>;
143 compatible = "regulator-fixed";
144 regulator-name = "fixed-supply";
145 regulator-min-microvolt = <3300000>;
146 regulator-max-microvolt = <3300000>;
147 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
148 };
149
150 lcd0: display {
151 compatible = "panel-dpi";
152 label = "15";
153 status = "okay";
154 /* default-on; */
155 pinctrl-names = "default";
156
157 port {
158 lcd_in: endpoint {
159 remote-endpoint = <&dpi_out>;
160 };
161 };
162
163 panel-timing {
164 clock-frequency = <9000000>;
165 hactive = <480>;
166 vactive = <272>;
167 hfront-porch = <3>;
168 hback-porch = <2>;
169 hsync-len = <42>;
170 vback-porch = <3>;
171 vfront-porch = <4>;
172 vsync-len = <11>;
173 hsync-active = <0>;
174 vsync-active = <0>;
175 de-active = <1>;
176 pixelclk-active = <1>;
177 };
178 };
179
180 bl: backlight {
181 compatible = "pwm-backlight";
182 pinctrl-names = "default";
183 pinctrl-0 = <&backlight_pins>;
184 pwms = <&pwm10 0 5000000 0>;
185 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
186 default-brightness-level = <7>;
187 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
188 };
189};
190
191&mmc1 {
192 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
193 pinctrl-names = "default";
194 pinctrl-0 = <&mmc1_pins &mmc1_cd>;
195 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
196 vmmc-supply = <&vmmc1>;
197 bus-width = <4>;
198 cap-power-off-card;
199};
200
201&omap3_pmx_core {
202 gpio_key_pins: pinmux_gpio_key_pins {
203 pinctrl-single,pins = <
204 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
205 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
206 >;
207 };
208
209 pwm_pins: pinmux_pwm_pins {
210 pinctrl-single,pins = <
211 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
212 >;
213 };
214
215 led_pins: pinmux_led_pins {
216 pinctrl-single,pins = <
217 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
218 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
219 >;
220 };
221
222 mmc1_pins: pinmux_mmc1_pins {
223 pinctrl-single,pins = <
224 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
225 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
226 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
227 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
228 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
229 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
230 >;
231 };
232
233 tsc2004_pins: pinmux_tsc2004_pins {
234 pinctrl-single,pins = <
235 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
236 >;
237 };
238
239 backlight_pins: pinmux_backlight_pins {
240 pinctrl-single,pins = <
241 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
242 >;
243 };
244
245 isp_pins: pinmux_isp_pins {
246 pinctrl-single,pins = <
247 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
248 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
249 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
250 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
251
252 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
253 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
254 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
255 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
256 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
257 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
258 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
259 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
260 >;
261 };
262
263 panel_pwr_pins: pinmux_panel_pwr_pins {
264 pinctrl-single,pins = <
265 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
266 >;
267 };
268
269 dss_dpi_pins1: pinmux_dss_dpi_pins1 {
270 pinctrl-single,pins = <
271 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
272 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
273 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
274 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
275
276 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
277 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
278 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
279 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
280 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
281 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
282 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
283 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
284 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
285 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
286 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
287 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
288
289 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
290 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
291 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
292 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
293 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
294 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
295 >;
296 };
297};
298
299&omap3_pmx_wkup {
300 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
301 pinctrl-single,pins = <
302 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
303 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
304 >;
305 };
306
307 lan9221_pins: pinmux_lan9221_pins {
308 pinctrl-single,pins = <
309 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
310 >;
311 };
312
313 mmc1_cd: pinmux_mmc1_cd {
314 pinctrl-single,pins = <
315 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
316 >;
317 };
318};
319
320&i2c2 {
321 mt9p031@48 {
322 compatible = "aptina,mt9p031";
323 reg = <0x48>;
324 clocks = <&isp 0>;
325 vaa-supply = <&vaux4>;
326 vdd-supply = <&vaux4>;
327 vdd_io-supply = <&vaux4>;
328 port {
329 mt9p031_out: endpoint {
330 input-clock-frequency = <24000000>;
331 pixel-clock-frequency = <72000000>;
332 remote-endpoint = <&ccdc_ep>;
333 };
334 };
335 };
336};
337
338&i2c3 {
339 touchscreen: tsc2004@48 {
340 compatible = "ti,tsc2004";
341 reg = <0x48>;
342 vio-supply = <&vaux1>;
343 pinctrl-names = "default";
344 pinctrl-0 = <&tsc2004_pins>;
345 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
346
347 touchscreen-fuzz-x = <4>;
348 touchscreen-fuzz-y = <7>;
349 touchscreen-fuzz-pressure = <2>;
350 touchscreen-size-x = <4096>;
351 touchscreen-size-y = <4096>;
352 touchscreen-max-pressure = <2048>;
353
354 ti,x-plate-ohms = <280>;
355 ti,esd-recovery-timeout-ms = <8000>;
356 };
357};
358
359&mcspi1 {
360 at25@0 {
361 compatible = "atmel,at25";
362 reg = <0>;
363 spi-max-frequency = <5000000>;
364 spi-cpha;
365 spi-cpol;
366
367 pagesize = <64>;
368 size = <32768>;
369 address-width = <16>;
370 };
371};
372
373&isp {
374 pinctrl-names = "default";
375 pinctrl-0 = <&isp_pins>;
376 ports {
377 port@0 {
378 reg = <0>;
379 ccdc_ep: endpoint {
380 remote-endpoint = <&mt9p031_out>;
381 bus-width = <8>;
382 hsync-active = <1>;
383 vsync-active = <1>;
384 pclk-sample = <0>;
385 };
386 };
387 };
388};
389
390&uart1 {
391 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
392};
393
394/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
395&usb_otg_hs {
396 pinctrl-names = "default";
397 pinctrl-0 = <&hsusb_otg_pins>;
398 interface-type = <0>;
399 usb-phy = <&usb2_phy>;
400 phys = <&usb2_phy>;
401 phy-names = "usb2-phy";
402 mode = <3>;
403 power = <50>;
404}; 17};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
new file mode 100644
index 000000000000..86c5644f558c
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -0,0 +1,395 @@
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
5 */
6
7/ {
8 gpio_keys {
9 compatible = "gpio-keys";
10 pinctrl-names = "default";
11 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
12
13 sysboot2 {
14 label = "sysboot2";
15 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
16 linux,code = <BTN_0>;
17 wakeup-source;
18 };
19
20 sysboot5 {
21 label = "sysboot5";
22 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
23 linux,code = <BTN_1>;
24 wakeup-source;
25 };
26
27 gpio1 {
28 label = "gpio1";
29 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
30 linux,code = <BTN_2>;
31 wakeup-source;
32 };
33
34 gpio2 {
35 label = "gpio2";
36 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
37 linux,code = <BTN_3>;
38 wakeup-source;
39 };
40 };
41
42 sound {
43 compatible = "ti,omap-twl4030";
44 ti,model = "omap3logic";
45 ti,mcbsp = <&mcbsp2>;
46 };
47
48 leds {
49 compatible = "gpio-leds";
50 pinctrl-names = "default";
51 pinctrl-0 = <&led_pins>;
52
53 led1 {
54 label = "led1";
55 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
56 linux,default-trigger = "cpu0";
57 };
58
59 led2 {
60 label = "led2";
61 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
62 linux,default-trigger = "none";
63 };
64 };
65
66 pwm10: dmtimer-pwm {
67 compatible = "ti,omap-dmtimer-pwm";
68 pinctrl-names = "default";
69 pinctrl-0 = <&pwm_pins>;
70 ti,timers = <&timer10>;
71 #pwm-cells = <3>;
72 };
73
74};
75
76&vaux1 {
77 regulator-min-microvolt = <3000000>;
78 regulator-max-microvolt = <3000000>;
79};
80
81&vaux4 {
82 regulator-min-microvolt = <1800000>;
83 regulator-max-microvolt = <1800000>;
84};
85
86&mcbsp2 {
87 status = "okay";
88};
89
90&charger {
91 ti,bb-uvolt = <3200000>;
92 ti,bb-uamp = <150>;
93};
94
95&gpmc {
96 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
97 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
98
99 ethernet@gpmc {
100 pinctrl-names = "default";
101 pinctrl-0 = <&lan9221_pins>;
102 interrupt-parent = <&gpio5>;
103 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
104 reg = <1 0 0xff>;
105 };
106};
107
108&vpll2 {
109 regulator-always-on;
110};
111
112&dss {
113 status = "ok";
114 vdds_dsi-supply = <&vpll2>;
115 vdda_video-supply = <&video_reg>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&dss_dpi_pins1>;
118 port {
119 dpi_out: endpoint {
120 remote-endpoint = <&lcd_in>;
121 data-lines = <16>;
122 };
123 };
124};
125
126/ {
127 aliases {
128 display0 = &lcd0;
129 };
130
131 video_reg: video_reg {
132 pinctrl-names = "default";
133 pinctrl-0 = <&panel_pwr_pins>;
134 compatible = "regulator-fixed";
135 regulator-name = "fixed-supply";
136 regulator-min-microvolt = <3300000>;
137 regulator-max-microvolt = <3300000>;
138 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
139 };
140
141 lcd0: display {
142 compatible = "panel-dpi";
143 label = "15";
144 status = "okay";
145 /* default-on; */
146 pinctrl-names = "default";
147
148 port {
149 lcd_in: endpoint {
150 remote-endpoint = <&dpi_out>;
151 };
152 };
153
154 panel-timing {
155 clock-frequency = <9000000>;
156 hactive = <480>;
157 vactive = <272>;
158 hfront-porch = <3>;
159 hback-porch = <2>;
160 hsync-len = <42>;
161 vback-porch = <3>;
162 vfront-porch = <4>;
163 vsync-len = <11>;
164 hsync-active = <0>;
165 vsync-active = <0>;
166 de-active = <1>;
167 pixelclk-active = <1>;
168 };
169 };
170
171 bl: backlight {
172 compatible = "pwm-backlight";
173 pinctrl-names = "default";
174 pinctrl-0 = <&backlight_pins>;
175 pwms = <&pwm10 0 5000000 0>;
176 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
177 default-brightness-level = <7>;
178 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
179 };
180};
181
182&mmc1 {
183 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&mmc1_pins &mmc1_cd>;
186 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
187 vmmc-supply = <&vmmc1>;
188 bus-width = <4>;
189 cap-power-off-card;
190};
191
192&omap3_pmx_core {
193 gpio_key_pins: pinmux_gpio_key_pins {
194 pinctrl-single,pins = <
195 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
196 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
197 >;
198 };
199
200 pwm_pins: pinmux_pwm_pins {
201 pinctrl-single,pins = <
202 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
203 >;
204 };
205
206 led_pins: pinmux_led_pins {
207 pinctrl-single,pins = <
208 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
209 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
210 >;
211 };
212
213 mmc1_pins: pinmux_mmc1_pins {
214 pinctrl-single,pins = <
215 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
216 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
217 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
218 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
219 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
220 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
221 >;
222 };
223
224 tsc2004_pins: pinmux_tsc2004_pins {
225 pinctrl-single,pins = <
226 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
227 >;
228 };
229
230 backlight_pins: pinmux_backlight_pins {
231 pinctrl-single,pins = <
232 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
233 >;
234 };
235
236 isp_pins: pinmux_isp_pins {
237 pinctrl-single,pins = <
238 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
239 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
240 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
241 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
242
243 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
244 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
245 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
246 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
247 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
248 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
249 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
250 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
251 >;
252 };
253
254 panel_pwr_pins: pinmux_panel_pwr_pins {
255 pinctrl-single,pins = <
256 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
257 >;
258 };
259
260 dss_dpi_pins1: pinmux_dss_dpi_pins1 {
261 pinctrl-single,pins = <
262 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
263 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
264 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
265 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
266
267 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
268 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
269 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
270 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
271 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
272 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
273 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
274 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
275 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
276 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
277 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
278 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
279
280 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
281 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
282 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
283 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
284 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
285 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
286 >;
287 };
288};
289
290&omap3_pmx_wkup {
291 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
292 pinctrl-single,pins = <
293 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
294 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
295 >;
296 };
297
298 lan9221_pins: pinmux_lan9221_pins {
299 pinctrl-single,pins = <
300 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
301 >;
302 };
303
304 mmc1_cd: pinmux_mmc1_cd {
305 pinctrl-single,pins = <
306 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
307 >;
308 };
309};
310
311&i2c2 {
312 mt9p031@48 {
313 compatible = "aptina,mt9p031";
314 reg = <0x48>;
315 clocks = <&isp 0>;
316 vaa-supply = <&vaux4>;
317 vdd-supply = <&vaux4>;
318 vdd_io-supply = <&vaux4>;
319 port {
320 mt9p031_out: endpoint {
321 input-clock-frequency = <24000000>;
322 pixel-clock-frequency = <72000000>;
323 remote-endpoint = <&ccdc_ep>;
324 };
325 };
326 };
327};
328
329&i2c3 {
330 touchscreen: tsc2004@48 {
331 compatible = "ti,tsc2004";
332 reg = <0x48>;
333 vio-supply = <&vaux1>;
334 pinctrl-names = "default";
335 pinctrl-0 = <&tsc2004_pins>;
336 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
337
338 touchscreen-fuzz-x = <4>;
339 touchscreen-fuzz-y = <7>;
340 touchscreen-fuzz-pressure = <2>;
341 touchscreen-size-x = <4096>;
342 touchscreen-size-y = <4096>;
343 touchscreen-max-pressure = <2048>;
344
345 ti,x-plate-ohms = <280>;
346 ti,esd-recovery-timeout-ms = <8000>;
347 };
348};
349
350&mcspi1 {
351 at25@0 {
352 compatible = "atmel,at25";
353 reg = <0>;
354 spi-max-frequency = <5000000>;
355 spi-cpha;
356 spi-cpol;
357
358 pagesize = <64>;
359 size = <32768>;
360 address-width = <16>;
361 };
362};
363
364&isp {
365 pinctrl-names = "default";
366 pinctrl-0 = <&isp_pins>;
367 ports {
368 port@0 {
369 reg = <0>;
370 ccdc_ep: endpoint {
371 remote-endpoint = <&mt9p031_out>;
372 bus-width = <8>;
373 hsync-active = <1>;
374 vsync-active = <1>;
375 pclk-sample = <0>;
376 };
377 };
378 };
379};
380
381&uart1 {
382 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
383};
384
385/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
386&usb_otg_hs {
387 pinctrl-names = "default";
388 pinctrl-0 = <&hsusb_otg_pins>;
389 interface-type = <0>;
390 usb-phy = <&usb2_phy>;
391 phys = <&usb2_phy>;
392 phy-names = "usb2-phy";
393 mode = <3>;
394 power = <50>;
395};
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-22 20:29:59 -0400