dt-bindings: Add Multi-Inno MI0283QT binding

Add device-tree binding documentation for the MI0283QT display panel.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Rob Herring <robh@kernel.org>

1 files changed, 27 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 000000000000..eed48c3d4875
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:   "multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:     D/C pin. The presence/absence of this GPIO determines
+                the panel interface mode (IM[3:0] pins):
+                - present: IM=x110 4-wire 8-bit data serial interface
+                - absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:  Reset pin
+- power-supply: A regulator node for the supply voltage.
+- backlight:    phandle of the backlight device attached to the panel
+- rotation:     panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+        mi0283qt@0{
+                compatible = "multi-inno,mi0283qt";
+                reg = <0>;
+                spi-max-frequency = <32000000>;
+                rotation = <90>;
+                dc-gpios = <&gpio 25 0>;
+                backlight = <&backlight>;
+        };