Input: rotary-encoder - remove references to platform data from docs

The driver has been converted to use generic device properties, so
stop referring to platform data.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 44 insertions, 41 deletions

diff --git a/Documentation/input/rotary-encoder.rst b/Documentation/input/rotary-encoder.rst
index 4695bea67f9b..b07b20a295ac 100644
--- a/Documentation/input/rotary-encoder.rst
+++ b/Documentation/input/rotary-encoder.rst
@@ -81,48 +81,51 @@ Board integration
 
 To use this driver in your system, register a platform_device with the
 name 'rotary-encoder' and associate the IRQs and some specific platform
-data with it.
+data with it. Because the driver uses generic device properties, this can
+be done either via device tree, ACPI, or using static board files, like in
+example below:
 
-struct rotary_encoder_platform_data is declared in
-include/linux/rotary-encoder.h and needs to be filled with the number of
-steps the encoder has and can carry information about externally inverted
-signals (because of an inverting buffer or other reasons). The encoder
-can be set up to deliver input information as either an absolute or relative
-axes. For relative axes the input event returns +/-1 for each step. For
-absolute axes the position of the encoder can either roll over between zero
-and the number of steps or will clamp at the maximum and zero depending on
-the configuration.
+::
 
-Because GPIO to IRQ mapping is platform specific, this information must
-be given in separately to the driver. See the example below.
+        /* board support file example */
 
-::
+        #include <linux/input.h>
+        #include <linux/gpio/machine.h>
+        #include <linux/property.h>
+
+        #define GPIO_ROTARY_A 1
+        #define GPIO_ROTARY_B 2
+
+        static struct gpiod_lookup_table rotary_encoder_gpios = {
+                .dev_id = "rotary-encoder.0",
+                .table = {
+                        GPIO_LOOKUP_IDX("gpio-0",
+                                        GPIO_ROTARY_A, NULL, 0, GPIO_ACTIVE_LOW),
+                        GPIO_LOOKUP_IDX("gpio-0",
+                                        GPIO_ROTARY_B, NULL, 1, GPIO_ACTIVE_HIGH),
+                        { },
+                },
+        };
+
+        static const struct property_entry rotary_encoder_properties[] __initconst = {
+                PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
+                PROPERTY_ENTRY_INTEGER("linux,axis",                      u32, ABS_X),
+                PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",    u32, 0),
+                { },
+        };
+
+        static struct platform_device rotary_encoder_device = {
+                .name           = "rotary-encoder",
+                .id             = 0,
+        };
+
+        ...
+
+        gpiod_add_lookup_table(&rotary_encoder_gpios);
+        device_add_properties(&rotary_encoder_device, rotary_encoder_properties);
+        platform_device_register(&rotary_encoder_device);
+
+        ...
 
-    /* board support file example */
-
-    #include <linux/input.h>
-    #include <linux/rotary_encoder.h>
-
-    #define GPIO_ROTARY_A 1
-    #define GPIO_ROTARY_B 2
-
-    static struct rotary_encoder_platform_data my_rotary_encoder_info = {
-            .steps              = 24,
-            .axis               = ABS_X,
-            .relative_axis      = false,
-            .rollover   = false,
-            .gpio_a             = GPIO_ROTARY_A,
-            .gpio_b             = GPIO_ROTARY_B,
-            .inverted_a = 0,
-            .inverted_b = 0,
-            .half_period        = false,
-            .wakeup_source      = false,
-    };
-
-    static struct platform_device rotary_encoder_device = {
-            .name               = "rotary-encoder",
-            .id         = 0,
-            .dev                = {
-                    .platform_data = &my_rotary_encoder_info,
-            }
-    };
+Please consult device tree binding documentation to see all properties
+supported by the driver.