aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAge
* ath9k_htc: fix NULL-deref at probeJohan Hovold2017-05-25
| | | | | | | | | | | | | | commit ebeb36670ecac36c179b5fb5d5c88ff03ba191ec upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k_htc: Add support of AirTies 1eda:2315 AR9271 deviceDmitry Tunin2017-05-25
| | | | | | | | | | | | | | | | | | commit 16ff1fb0e32f76a5d285a6f23b82d21aa52813c6 upstream. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=1eda ProdID=2315 Rev=01.08 S: Manufacturer=ATHEROS S: Product=USB2.0 WLAN S: SerialNumber=12345 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: pcie: fix cmd_buf use-after-free in remove/resetBrian Norris2017-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3c8cb9ad032d737b874e402c59eb51e3c991a144 upstream. Command buffers (skb's) are allocated by the main driver, and freed upon the last use. That last use is often in mwifiex_free_cmd_buffer(). In the meantime, if the command buffer gets used by the PCI driver, we map it as DMA-able, and store the mapping information in the 'cb' memory. However, if a command was in-flight when resetting the device (and therefore was still mapped), we don't get a chance to unmap this memory until after the core has cleaned up its command handling. Let's keep a refcount within the PCI driver, so we ensure the memory only gets freed after we've finished unmapping it. Noticed by KASAN when forcing a reset via: echo 1 > /sys/bus/pci/.../reset The same code path can presumably be exercised in remove() and shutdown(). [ 205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex... [ 205.400393] ================================================================== [ 205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28 [ 205.419040] Read of size 16 by task bash/1913 [ 205.423421] ============================================================================= [ 205.431625] BUG skbuff_head_cache (Tainted: G B ): kasan: bad access detected [ 205.439815] ----------------------------------------------------------------------------- [ 205.439815] [ 205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913 [ 205.456709] alloc_debug_processing+0x124/0x178 [ 205.461282] ___slab_alloc.constprop.58+0x528/0x608 [ 205.466196] __slab_alloc.isra.54.constprop.57+0x44/0x54 [ 205.471542] kmem_cache_alloc+0xcc/0x278 [ 205.475497] __build_skb+0x48/0x114 [ 205.479019] __netdev_alloc_skb+0xe0/0x170 [ 205.483244] mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex] [ 205.488759] mwifiex_init_fw+0x40/0x6cc [mwifiex] [ 205.493584] _mwifiex_fw_dpc+0x158/0x520 [mwifiex] [ 205.498491] mwifiex_reinit_sw+0x2c4/0x398 [mwifiex] [ 205.503510] mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie] [ 205.509643] pci_reset_notify+0x5c/0x6c [ 205.513519] pci_reset_function+0x6c/0x7c [ 205.517567] reset_store+0x68/0x98 [ 205.521003] dev_attr_store+0x54/0x60 [ 205.524705] sysfs_kf_write+0x9c/0xb0 [ 205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913 [ 205.535064] free_debug_processing+0x264/0x370 [ 205.539550] __slab_free+0x84/0x40c [ 205.543075] kmem_cache_free+0x1c8/0x2a0 [ 205.547030] __kfree_skb+0xb0/0xbc [ 205.550465] consume_skb+0x164/0x178 [ 205.554079] __dev_kfree_skb_any+0x58/0x64 [ 205.558304] mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex] [ 205.563817] mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex] [ 205.569164] mwifiex_shutdown_sw+0x178/0x310 [mwifiex] [ 205.574353] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.580398] pci_reset_notify+0x5c/0x6c [ 205.584274] pci_dev_save_and_disable+0x24/0x6c [ 205.588837] pci_reset_function+0x30/0x7c [ 205.592885] reset_store+0x68/0x98 [ 205.596324] dev_attr_store+0x54/0x60 [ 205.600017] sysfs_kf_write+0x9c/0xb0 ... [ 205.800488] Call trace: [ 205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190 [ 205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28 [ 205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc [ 205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168 [ 205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c [ 205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500 [ 205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c [ 205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c [ 205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] [ 205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie] [ 205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie] [ 205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie] [ 205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex] [ 205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c [ 205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c [ 205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c [ 205.910134] [<ffffffc000641118>] reset_store+0x68/0x98 [ 205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60 [ 205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0 [ 205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8 [ 205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c [ 205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4 [ 205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8 [ 205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28 ... [ 205.998268] ================================================================== This bug has been around in different forms for a while. It was sort of noticed in commit 955ab095c51a ("mwifiex: Do not kfree cmd buf while unregistering PCIe"), but it just fixed the double-free, without acknowledging the potential for use-after-free. Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: MAC randomization should not be persistentBrian Norris2017-05-25
| | | | | | | | | | | | | | | | | | | | | | commit 7e2f18f06408ff56d7f75e68de8064777137b319 upstream. nl80211 provides the NL80211_SCAN_FLAG_RANDOM_ADDR for every scan request that should be randomized; the absence of such a flag means we should not randomize. However, mwifiex was stashing the latest randomization request and *always* using it for future scans, even those that didn't set the flag. Let's zero out the randomization info whenever we get a scan request without NL80211_SCAN_FLAG_RANDOM_ADDR. I'd prefer to remove priv->random_mac entirely (and plumb the randomization MAC properly through the call sequence), but the spaghetti is a little difficult to unravel here for me. Fixes: c2a8f0ff9c6c ("mwifiex: support random MAC address for scanning") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8821ae: setup 8812ae RFE according to device typeLarry Finger2017-05-25
| | | | | | | | | | | | | | | | | | | | | | | commit 46cfa2148e7371c537efff1a1c693e58f523089d upstream. Current channel switch implementation sets 8812ae RFE reg value assuming that device always has type 2. Extend possible RFE types set and write corresponding reg values. Source for new code is http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip Signed-off-by: Maxim Samoylov <max7255@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* wlcore: Add RX_BA_WIN_SIZE_CHANGE_EVENT eventMaxim Altshul2017-05-14
| | | | | | | | | | | | | | | | | | | commit e7ee74b56f23ba447d3124f2eccc32033cca501d upstream. This event is used by the Firmware to limit the RX BA win size for a specific link. The event handler updates the new size in the mac's sta->sta struct. BA sessions opened for that link will use the new restricted win_size. This limitation remains until a new update is received or until the link is closed. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* wlcore: Pass win_size taken from ieee80211_sta to FWMaxim Altshul2017-05-14
| | | | | | | | | | | | | | | | | | commit 42c7372a111630dab200c2f959424f5ec3bf79a4 upstream. When starting a new BA session, we must pass the win_size to the FW. To do this we take max_rx_aggregation_subframes (BA RX win size) which is stored in ieee80211_sta structure (e.g per link and not per HW) We will use the value stored per link when passing the win_size to firmware through the ACX_BA_SESSION_RX_SETUP command. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: Make skb header writable before useJames Hughes2017-05-14
| | | | | | | | | | | | | | | | | commit 9cc4b7cb86cbcc6330a3faa8cd65268cd2d3c227 upstream. The driver was making changes to the skb_header without ensuring it was writable (i.e. uncloned). This patch also removes some boiler plate header size checking/adjustment code as that is also handled by the skb_cow_header function used to make header writable. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: Ensure pointer correctly set if skb data location changesJames Hughes2017-05-14
| | | | | | | | | | | | | | | | commit 455a1eb4654c24560eb9dfc634f29cba3d87601e upstream. The incoming skb header may be resized if header space is insufficient, which might change the data adddress in the skb. Ensure that a cached pointer to that data is correctly set by moving assignment to after any possible changes. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: writing zero bytes to debugfs causes a crashDan Carpenter2017-05-14
| | | | | | | | | | | | | | | | | | commit 251fe09f13bfb54c1ede66ee8bf8ddd0061c4f7c upstream. This is a static analysis fix. The warning is: drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect() warn: integer overflows 'sizeof(*desc) + len' I guess this code is supposed to take a NUL character, but if we write zero bytes then it tries to write -1 characters and crashes. Fixes: c91b865cb14d ("iwlwifi: mvm: support description for user triggered fw dbg collection") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: synchronize firmware DMA paging memorySara Sharon2017-05-14
| | | | | | | | | | | | | | | | | | | commit 4b70f07686d75d1eb5d956812cc810944e0b29b2 upstream. When driver needs to access the contents of a streaming DMA buffer without unmapping it it should call dma_sync_single_for_cpu(). Once the call has been made, the CPU "owns" the DMA buffer and can work with it as needed. Before the device accesses the buffer, however, ownership should be transferred back to it with dma_sync_single_for_device(). Both calls weren't performed by the driver, resulting with odd paging errors on some platforms. Fix it. Fixes: a6c4fb4441f4 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix references to first_agg_queue in DQA modeSara Sharon2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c56108b58ab870892277940a1def0d6b153f3e26 upstream. In DQA mode, first_agg_queue is initialized to IWL_MVM_DQA_MIN_DATA_QUEUE. This causes two bugs in the tx response flow: 1. When TX fails, we set IEEE80211_TX_STAT_AMPDU_NO_BACK regardless if we actually have aggregation open on the queue. This causes mac80211 to send a BAR frame even though there is no aggregation open. Fix that by simply checking the AMPDU flag that is set on by mac80211 for AMPDU packets. 2. When reclaiming frames in aggregation mode, we reclaim based on scheduler ssn and not the SN. The reason is that scheduler ssn may be ahead of SN due to a hole in the BA window that was filled. However, if we have aggregations open on IWL_MVM_DQA_BSS_CLIENT_QUEUE the reclaim flow will still go to the code of non-aggregation instead of the aggregation code since IWL_MVM_DQA_BSS_CLIENT_QUEUE is smaller than IWL_MVM_DQA_MIN_DATA_QUEUE, although it is a valid aggregation queue. Fix that by always using the aggregation reclaim code by default in DQA mode (currently it is implicitly used by default for all queues except the reserved BSS queue). Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix pending frame counter calculationSara Sharon2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | commit 94c3e614df2117626fccfac8f821c66e30556384 upstream. In DQA mode the check whether to decrement the pending frames counter relies on the tid status and not on the txq id. This may result in an inconsistent state of the pending frames counter in case frame is queued on a non aggregation queue but with this TID, and will be followed by a failure to remove the station and later on SYSASSERT 0x3421 when trying to remove the MAC. Such frames are for example bar and qos NDPs. Fix it by aligning the condition of incrementing the counter with the condition of decrementing it - rely on TID state for DQA mode. Also, avoid internal error like this affecting station removal for DQA mode - since we can know for sure it is an internal error. Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm/pcie: adjust A-MSDU tx_cmd length in PCIeJohannes Berg2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 05e5a7e58d3f8f597ebe6f78aaa13a2656b78239 upstream. Instead of setting the tx_cmd length in the mvm code, which is complicated by the fact that DQA may want to temporarily store the SKB on the side, adjust the length in the PCIe code which also knows about this since it's responsible for duplicating all those headers that are account for in this code. As the PCIe code already relies on the tx_cmd->len field, this doesn't really introduce any new dependencies. To make this possible we need to move the memcpy() of the TX command until after it was updated. This does even simplify the code though, since the PCIe code already does a lot of manipulations to build A-MSDUs correctly and changing the length becomes a simple operation to see how much was added/removed, rather than predicting it. Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: Use aux queue for offchannel frames in dqaBeni Lev2017-05-14
| | | | | | | | | | | | | | | commit 6574dc943fc32a2fce69fab14891abca7eecb67c upstream. Since offchannel activity doesn't always require a BSS, e.g. ANQP sessions, offchannel frames should not use the BSS queue, because it might not be initialized. Use the auxilary queue instead Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode") Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix reorder timer re-armingSara Sharon2017-05-14
| | | | | | | | | | | | | | | commit 5351f9ab254c30d41659924265f1ecd7b4758d9e upstream. When NSSN is behind the reorder buffer due to timeout the reorder timer isn't getting re-armed until NSSN catches up. Fix it. Fixes: 0690405fef29 ("iwlwifi: mvm: add reorder timeout per frame") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: fix the set of DMA memory maskSara Sharon2017-05-14
| | | | | | | | | | | | | | | | commit 2c6262b754f3c3338cb40b23880a3ac1f4693b25 upstream. Our 9000 device supports 64 bit DMA address for RX only, and not for TX. Setting DMA mask to 64 for the whole device is erroneous - we can do it only for a000 devices where device is capable of both RX & TX DMA with 64 bit address space. Fixes: 96a6497bc3ed ("iwlwifi: pcie: add 9000 series multi queue rx DMA support") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: trans: Remove unused 'shift_param'Kirtika Ruchandani2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3ce4a03852d6dd3fd28c2fb2ee9f89bb9ccf9a9b upstream. shift_param is defined and set in iwl_pcie_load_cpu_sections but not used. Fix this to avoid -Wunused-but-set-variable warning. The code using it turned into dead code with commit dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") which added a separate function iwl_pcie_load_given_ucode_8000 (then 8000b) for IWL_DEVICE_FAMILY_8000. Commit 76f8c0e17edc ("iwlwifi: pcie: remove dead code") removed the dead code but left shift_param as is. iwlwifi/pcie/trans.c: In function ‘iwl_pcie_load_cpu_sections’: iwlwifi/pcie/trans.c:871:6: warning: variable ‘shift_param’ set but not used [-Wunused-but-set-variable] Fixes: dcab8ecd5617 ("iwlwifi: mvm: support ucode load for family_8000 B0 only") Fixes: 76f8c0e17edc ("iwlwifi: pcie: remove dead code") Signed-off-by: Kirtika Ruchandani <kirtika@google.com> Cc: Sara Sharon <sara.sharon@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Liad Kaufman <liad.kaufman@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [removed some unnecessary braces] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: don't increment / decrement a boolEmmanuel Grumbach2017-05-14
| | | | | | | | | | | | | | | | commit 04fa3e680b4dd2fdd11d0152fb9b6067e7aac140 upstream. David reported that the code I added uses the decrement and increment operator on a boolean variable. Fix that. Fixes: 0cd58eaab148 ("iwlwifi: pcie: allow the op_mode to block the tx queues") Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: overwrite skb info laterJohannes Berg2017-05-14
| | | | | | | | | | | | | | | | | | | | commit bd05a5bd6b11d7fd26a668de83c5cb996de05f8f upstream. We don't really need clear the skb's status area nor store the dev_cmd into it until we really commit to the frame by handing it to the transport - defer those operations until just before we do that. This doesn't entirely fix the bug with frames not getting sent out after having been deferred due to DQA, because it doesn't restore the info->driver_data[0] place that was already set to zero (or another value) by the A-MSDU logic. Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: don't restart HW if suspend fails with unified imageLuca Coelho2017-05-14
| | | | | | | | | | | | | commit bac453ab3745eaa64137ea6e77e009b45954f0ae upstream. For unified images, we shouldn't restart the HW if suspend fails. The only reason for restarting the HW with non-unified images is to go back to the D0 image. Fixes: 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: fix MODULE_FIRMWARE for 6030Jürg Billeter2017-05-14
| | | | | | | | | | | | | | commit d8320d75b59ecdc1b8e60ac793d3a54d84333a18 upstream. IWL6000G2B_UCODE_API_MAX is not defined. ucode_api_max of IWL_DEVICE_6030 uses IWL6000G2_UCODE_API_MAX. Use this also for MODULE_FIRMWARE. Fixes: 9d9b21d1b616 ("iwlwifi: remove IWL_*_UCODE_API_OK") Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: Avoid skipping WEP key deletion for APGanapathi Bhat2017-05-14
| | | | | | | | | | | | | | | | | | | commit a5b60de6972decc6b50a39abb376077c3c3621c8 upstream. This patch fixes the issue specific to AP. AP is started with WEP security and external station is connected to it. Data path works in this case. Now if AP is restarted with WPA/WPA2 security, station is able to connect but ping fails. Driver skips the deletion of WEP keys if interface type is AP. Removing that redundant check resolves the issue. Fixes: e57f1734d87a ("mwifiex: add key material v2 support") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: remove redundant dma padding in AMSDUXinming Hu2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5f0a221f59ad6b72202ef9c6e232086de8c336f2 upstream. We already ensure 64 bytes alignment and add padding if required during skb_aggr allocation. Alignment and padding in mwifiex_11n_form_amsdu_txpd() is redundant. We may end up accessing more data than allocated size with this. This patch fixes following issue by removing redundant padding. [ 370.241338] skbuff: skb_over_panic: text:ffffffffc046946a len:3550 put:72 head:ffff880000110000 data:ffff8800001100e4 tail:0xec2 end:0xec0 dev:<NULL> [ 370.241374] ------------[ cut here ]------------ [ 370.241382] kernel BUG at net/core/skbuff.c:104! 370.244032] Call Trace: [ 370.244041] [<ffffffff8c3df5ec>] skb_put+0x44/0x45 [ 370.244055] [<ffffffffc046946a>] mwifiex_11n_aggregate_pkt+0x1e9/0xa50 [mwifiex] [ 370.244067] [<ffffffffc0467c16>] mwifiex_wmm_process_tx+0x44a/0x6b7 [mwifiex] [ 370.244074] [<ffffffffc0411eb8>] ? 0xffffffffc0411eb8 [ 370.244084] [<ffffffffc046116b>] mwifiex_main_process+0x476/0x5a5 [mwifiex] [ 370.244098] [<ffffffffc0461298>] mwifiex_main_process+0x5a3/0x5a5 [mwifiex] [ 370.244113] [<ffffffff8be7e9ff>] process_one_work+0x1a4/0x309 [ 370.244123] [<ffffffff8be7f4ca>] worker_thread+0x20c/0x2ee [ 370.244130] [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383 [ 370.244136] [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383 [ 370.244143] [<ffffffff8be83742>] kthread+0x11c/0x124 [ 370.244150] [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24 [ 370.244157] [<ffffffff8c4da1ef>] ret_from_fork+0x3f/0x70 [ 370.244168] [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24 Fixes: 84b313b35f8158d ("mwifiex: make tx packet 64 byte DMA aligned") Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: debugfs: Fix (sometimes) off-by-1 SSID printBrian Norris2017-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6183468a23fc6b6903f8597982017ad2c7fdefcf upstream. Similar to commit fcd2042e8d36 ("mwifiex: printk() overflow with 32-byte SSIDs"), we failed to account for the existence of 32-char SSIDs in our debugfs code. Unlike in that case though, we zeroed out the containing struct first, and I'm pretty sure we're guaranteed to have some padding after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes long). So, this is the difference between: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef " ... and the correct output: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef" ... Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix NULL pointer dereferenceMiaoqing Pan2017-04-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 40bea976c72b9ee60f8d097852deb53ccbeaffbe upstream. relay_open() may return NULL, check the return value to avoid the crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] PGD 41cf28067 PUD 41be92067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35 Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15 07/04/2011 task: ffffffff81e0c4c0 task.stack: ffffffff81e00000 RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98 RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0 Stack: 0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9 000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0 0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60 Call Trace: <IRQ> [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k] [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0 [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0 Reported-by: Devin Tuchsen <devin.tuchsen@gmail.com> Tested-by: Devin Tuchsen <devin.tuchsen@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USBVishal Thanki2017-04-18
| | | | | | | | | | | | | | | | commit a083c8fd277b4122c804f18ec8c84165f345c71c upstream. In device removal routine, usage of "#ifdef CONFIG_RT2X00_LIB_USB" will not cover the case when it is configured as module. This will omit the entire if-block which does cleanup of URBs and cancellation of pending work. Changing the #ifdef to #if IS_ENABLED() to fix it. Signed-off-by: Vishal Thanki <vishalthanki@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rt2x00usb: do not anchor rx and tx urb'sStanislaw Gruszka2017-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 93c7018ec16bb83399dd4db61c361a6d6aba0d5a upstream. We might kill TX or RX urb during rt2x00usb_flush_entry(), what can cause anchor list corruption like shown below: [ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0 [ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70). <snip> [ 2074.035670] Call Trace: [ 2074.035672] [<ffffffff813bde47>] dump_stack+0x63/0x8c [ 2074.035674] [<ffffffff810a2231>] __warn+0xd1/0xf0 [ 2074.035676] [<ffffffff810a22af>] warn_slowpath_fmt+0x5f/0x80 [ 2074.035678] [<ffffffffa073855d>] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb] [ 2074.035679] [<ffffffff813dbe4c>] __list_add+0xac/0xc0 [ 2074.035681] [<ffffffff81591c6c>] usb_anchor_urb+0x4c/0xa0 [ 2074.035683] [<ffffffffa07322af>] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb] [ 2074.035684] [<ffffffffa0732322>] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb] To fix do not anchor TX and RX urb's, it is not needed as during shutdown we kill those urbs in rt2x00usb_free_entries(). Cc: Vishal Thanki <vishalthanki@gmail.com> Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rt2x00usb: fix anchor initializationStanislaw Gruszka2017-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0488a6121dfe6cbd44de15ea3627913b7549a1e9 upstream. If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due to using uninitialized usb_anchor structure: [ 855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19 [ 855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected [ 855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device [ 855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [ 855.435900] IP: _raw_spin_lock_irq+0xd/0x30 [ 855.435926] PGD 0 [ 855.435953] Oops: 0002 [#1] SMP <snip> [ 855.437011] Call Trace: [ 855.437029] ? usb_kill_anchored_urbs+0x27/0xc0 [ 855.437061] rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib] [ 855.437097] rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib] [ 855.437149] ? ieee80211_roc_setup+0x9e/0xd0 [mac80211] [ 855.437183] ? __kmalloc+0x1af/0x1f0 [ 855.437207] ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb] [ 855.437240] rt2x00usb_probe+0x155/0xc50 [rt2x00usb] [ 855.437273] rt2800usb_probe+0x15/0x20 [rt2800usb] [ 855.437304] usb_probe_interface+0x159/0x2d0 [ 855.437333] driver_probe_device+0x2bb/0x460 Patch changes initialization sequence to fix the problem. Cc: Vishal Thanki <vishalthanki@gmail.com> Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: use local iftype avoiding use-after-free of virtual interfaceArend Van Spriel2017-04-12
| | | | | | | | | | | | | | | | | | | commit d77facb88448cdeaaa3adba5b9704a48ac2ac8d6 upstream. A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual interface is removed using call to brcmf_remove_interface(). After that the virtual interface instance has been freed and should not be referenced. Solve this by storing the nl80211 iftype in local variable, which is used in a couple of places anyway. Reported-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: pcie: don't leak DMA buffers when removingBrian Norris2017-03-30
| | | | | | | | | | | | | | | | | | commit 4e841d3eb9294ce4137fdb5d0a88f1bceab9c212 upstream. When PCIe FLR support was added, much of the remove/release code for PCIe was migrated to ->down_dev(), but ->down_dev() is never called for device removal. Let's refactor the cleanup to be done in both cases. Also, drop the comments above mwifiex_cleanup_pcie(), because they were clearly wrong, and it's better to have clear and obvious code than to detail the code steps in comments anyway. Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: fix incorrect event channel deductionGavin Li2017-03-14
| | | | | | | | | | | | | | | | | | | | commit 8e290cecdd0178f3d4cf7d463c51dc7e462843b4 upstream. brcmf_sdio_fromevntchan() was being called on the the data frame rather than the software header, causing some frames to be mischaracterized as on the event channel rather than the data channel. This fixes a major performance regression (due to dropped packets). With this patch the download speed jumped from 1Mbit/s back up to 40MBit/s due to the sheer amount of packets being incorrectly processed. Fixes: c56caa9db8ab ("brcmfmac: screening firmware event packet") Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [kvalo@codeaurora.org: improve commit logs based on email discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8192c-common: Fix "BUG: KASAN:Larry Finger2017-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6773386f977ce5af339f9678fa2918909a946c6b upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: Fix alignment issuesPing-Ke Shih2017-03-12
| | | | | | | | | | | | | | | | | commit 40b368af4b750863b2cb66a3a9513241db2f0793 upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter2017-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9f1e32600816d695f817477d56490bfc2ba43c6 upstream. This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix race condition in enabling/disabling IRQsFelix Fietkau2017-03-12
| | | | | | | | | | | | | | | | | | | | | | | | commit 3a5e969bb2f6692a256352649355d56d018d6b88 upstream. The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath5k: drop bogus warning on drv_set_key with unsupported cipherFelix Fietkau2017-03-12
| | | | | | | | | | | commit a70e1d6fd6b5e1a81fa6171600942bee34f5128f upstream. Simply return -EOPNOTSUPP instead. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: fix boot failure in UTF mode/testmodeTamizh chelvam2017-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | commit cb4281528b62207918b1e95827cad7527aa4dbaa upstream. Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG) configuration are causing the following errors when UTF firmware is loaded to the target. Error message 1: [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110 [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110 [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110 Error message 2: [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95 [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95 Avoiding these configurations while bringing the target in testmode is solving the problem. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/downMichael Schenk2017-02-26
| | | | | | | | | | | | | | | commit 575ddce0507789bf9830d089557d2199d2f91865 upstream. In the function rtl_usb_start we pre-allocate a certain number of urbs for RX path but they will not be freed when calling rtl_usb_stop. This results in leaking urbs when doing ifconfig up and down. Eventually, the system has no available urbs. Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8192ce: Fix loading of incorrect firmwareJurij Smakov2017-02-14
| | | | | | | | | | | | | | | | | | | | | | commit 52f5631a4c056ad01682393be56d2be237e81610 upstream. In commit cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859, an error in the edit results in the wrong firmware being loaded for some models of the RTL8188/8192CE. In this condition, the connection suffered from high ping latency, slow transfer rates, and required higher signal strengths to work at all See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=853073, https://bugzilla.opensuse.org/show_bug.cgi?id=1017471, and https://github.com/lwfinger/rtlwifi_new/issues/203 for descriptions of the problems. This patch fixes all of those problems. Fixes: cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859") Signed-off-by: Jurij Smakov <jurij@wooyd.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: avoid crash on restart w/o reserved queuesJohannes Berg2017-02-09
| | | | | | | | | | | | | | | | commit 03c902bff524e0cf664737a33f2365f7837040bf upstream. When the firmware restarts in a situation in which any station has no queue reserved anymore because that queue was used, the code will crash trying to access the queue_info array at the offset 255, which is far too big. Fix this by checking that a queue is actually reserved before writing its status. Fixes: 8d98ae6eb0d5 ("iwlwifi: mvm: re-assign old queues after hw restart in dqa mode") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: fix double hyphen in MODULE_FIRMWARE for 8000Jürg Billeter2017-02-09
| | | | | | | | | | | | | | | commit 7941c59e45f3b6d30e07375e9b6713427e0a9f98 upstream. Mistakenly, the driver is trying to load the 8000C firmware with an incorrect name (i.e. with two hyphens where there should be only one) and that fails. Fix that by removing the hyphen from the format macro. Fixes: e1ba684f762b ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* orinoco: Use shash instead of ahash for MIC calculationsAndrew Lutomirski2017-01-19
| | | | | | | | | | | | | | | | | | | | commit 570b90fa230b8021f51a67fab2245fe8df6fe37d upstream. Eric Biggers pointed out that the orinoco driver pointed scatterlists at the stack. Fix it by switching from ahash to shash. The result should be simpler, faster, and more correct. kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I accidentally applied this patch to wireless-drivers-next when I was supposed to apply this wireless-drivers Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl_usb: Fix missing entry in USB driver's private dataLarry Finger2017-01-15
| | | | | | | | | | | | | | | | commit 60f59ce0278557f7896d5158ae6d12a4855a72cc upstream. These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: Fix enter/exit power_saveLarry Finger2017-01-15
| | | | | | | | | | | | | | | | | | | | | commit ba9f93f82abafe2552eac942ebb11c2df4f8dd7f upstream. In commit a5ffbe0a1993 ("rtlwifi: Fix scheduling while atomic bug") and commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), an error was introduced in the power-save routines due to the fact that leaving PS was delayed by the use of a work queue. This problem is fixed by detecting if the enter or leave routines are in interrupt mode. If so, the workqueue is used to place the request. If in normal mode, the enter or leave routines are called directly. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Reported-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "rtlwifi: Fix enter/exit power_save"Greg Kroah-Hartman2017-01-12
| | | | | | | | | | | | | This reverts commit 98068574928f499b30f136ff57ef9a03cc575a36, which is commit ba9f93f82abafe2552eac942ebb11c2df4f8dd7f upstream as it causes problems. Reported-by: Dmitry Osipenko <digetx@gmail.com> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
* ath10k: use the right length of "background"Nicolas Iooss2017-01-12
| | | | | | | | | | | | | commit 31b239824ece321c09bdb8e61e1d14814eaba38b upstream. The word "background" contains 10 characters so the third argument of strncmp() need to be 10 in order to match this prefix correctly. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Fixes: 855aed1220d2 ("ath10k: add spectral scan feature") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: fix failure to send NULL func frame for 10.4Mohammed Shafi Shajakhan2017-01-12
| | | | | | | | | | | | | | | | | | commit fcf7cf1551cae54e747a771f5808240f2a37708f upstream. This partially reverts 'commit 2cdce425aa33 ("ath10k: Fix broken NULL func data frame status for 10.4")' Unfortunately this breaks sending NULL func and the existing issue of obtaining proper tx status for NULL function will be fixed. Also update the comments for feature flag added to be useless and not working Fixes: 2cdce425aa33 "ath10k: Fix broken NULL func data frame status for 10.4" Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: do not return early to fix rcu unlockingTobias Klausmann2017-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d1f1c0e289e1bc46cd6873ba6dd6c627f459e7fa upstream. Starting with commit d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls and suspicious RCU usage: =============================== [ INFO: suspicious RCU usage. ] 4.9.0-rc8 #11 Not tainted ------------------------------- kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/7/0: #0: ( rcu_read_lock ){......} , at: [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k] stack backtrace: CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013 ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001 ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8 ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4 Call Trace: <IRQ> [<ffffffff8132b1e5>] dump_stack+0x68/0x93 [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110 [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200 [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0 [<ffffffff81058631>] irq_exit+0x61/0xd0 [<ffffffff81018d25>] do_IRQ+0x65/0x110 [<ffffffff81672189>] common_interrupt+0x89/0x89 <EOI> [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200 [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20 [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40 [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220 [<ffffffff810336f8>] start_secondary+0x148/0x170 Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: d94a461d7a7d ("ath9k: use ieee80211_tx_status_noskb where possible") Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)2017-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 79e57dd113d307a6c74773b8aaecf5442068988a upstream. The active_high LED of my Wistron DNMA-92 is still being recognized as active_low on 4.7.6 mainline. When I was preparing my former commit 0f9edcdd88a9 ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") to fix that I must have somehow messed up with testing, because I tested the final version of that patch before sending it, and it was apparently working; but now it is not working on 4.7.6 mainline. I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the PCI_VDEVICE section for 0x0029; but then I moved the former below the latter after seeing how 0x002A sections were sorted in the file. This turned out to be wrong: if a generic PCI_VDEVICE entry (that has both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will match first and will be used. With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6. While I'm at it, let's fix 0x002A too by also moving its generic definition below its specific ones. Fixes: 0f9edcdd88a9 ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> [kvalo@qca.qualcomm.com: improve the commit log based on email discussions] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-22 12:49:27 -0400