aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
Commit message (Collapse)AuthorAge
* ixgbe/ixgbevf: Don't use lco_csum to compute IPv4 checksumAlexander Duyck2016-12-01
| | | | | | | | | | | | | | | In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: b83e30104bd9 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: fix panic when using macvlan with l2-fwd-offload enabledEmil Tantilov2016-10-27
| | | | | | | | | | | | | | | | | | | Fix NULL pointer dereference in the case where a macvlan interface is brought up while the PF is still down: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffffa0170fb2>] ixgbe_alloc_rx_buffers+0x42/0x1a0 [ixgbe] Call Trace: [<ffffffffa017336b>] ixgbe_configure_rx_ring+0x2eb/0x3d0 [ixgbe] [<ffffffffa0173811>] ixgbe_fwd_ring_up+0xd1/0x380 [ixgbe] [<ffffffffa0179709>] ixgbe_fwd_add+0x149/0x230 [ixgbe] [<ffffffffa0113480>] macvlan_open+0x260/0x2b0 [macvlan] Reported-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Support 4 queue RSS on VFs with 1 or 2 queue RSS on PFAlexander Duyck2016-09-23
| | | | | | | | | | | | | | | | Instead of limiting the VFs if we don't use 4 queues for RSS in the PF we can instead just limit the RSS queues used to a power of 2. By doing this we can support use cases where VFs are using more queues than the PF is currently using and can support RSS if so desired. The only limitation on this is that we cannot support 3 queues of RSS in the PF or VF. In either of these cases we should fall back to 2 queues in order to be able to use the power of 2 masking provided by the psrtype register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: simplify the logic for setting VLAN filteringEmil Tantilov2016-09-23
| | | | | | | | | Simplify the logic for setting VLNCTRL.VFE by checking the VMDQ flag and 82598 MAC instead of having to maintain a list of MAC types. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for new X557 deviceDon Skidmore2016-08-20
| | | | | | | | This patch adds support for the new copper device X557. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add support for geneve Rx offloadEmil Tantilov2016-08-20
| | | | | | | | | | | | | | | | | | Add geneve Rx offload support for x550em_a. The implementation follows the vxlan code with the lower 16 bits of the VXLANCTRL register holding the UDP port for VXLAN and the upper for Geneve. Disabled NFS filters in the RFCTL register which allows us to simplify the check for VXLAN and Geneve packets in ixgbe_rx_checksum(). Removed vxlan from the name of the callback functions and replaced it with udp_tunnel which is more in line with the new API. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: use atomic bitwise operations when handling reset requestsEmil Tantilov2016-08-19
| | | | | | | | | Use atomic bitwise operations when setting and checking reset requests. This should help with possible races in the service task. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: only check Tx queue enablement when debuggingEmil Tantilov2016-08-19
| | | | | | | | | | | Following a write the TXDCTL.ENABLE bit is set only when the Tx queue is actually enabled, which may not happen during the configure phase even if we waited for it. Make this check debug only since this is causing confusion with users who notice the warning in dmesg. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net_sched: convert tcf_exts from list to pointer arrayWANG Cong2016-08-17
| | | | | | | | | | | | | | | | | | | | | As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Re-enable ability to toggle VLAN filteringAlexander Duyck2016-08-16
| | | | | | | | | | | | Back when I submitted the GSO code I messed up and dropped the support for disabling the VLAN tag filtering via the feature bit. This patch re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the VLAN filtering independent of toggling promiscuous mode. Fixes: b83e30104b ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Force VLNCTRL.VFE to be set in all VMDq pathsAlexander Duyck2016-08-16
| | | | | | | | | | | | | | | | When I was adding the code for enabling VLAN promiscuous mode with SR-IOV enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has assumed there was code in another path that was setting it when we enabled SR-IOV. This wasn't the case and as a result we were just disabling VLAN filtering for all the VFs apparently. Also the previous patches were always clearing CFIEN which was always set to 0 by the hardware anyway so I am dropping the redundant bit clearing. Fixes: 16369564915a ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds2016-08-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
| * ethernet/intel: Use pci_(request|release)_mem_regionsJohannes Thumshirn2016-06-23
| | | | | | | | | | | | | | | | | | | | | | Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the Intel ethernet drivers. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: David S. Miller <davem@davemloft.net>
* | Merge branch '10GbE' of ↵David S. Miller2016-07-25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to ixgbe and ixgbevf only. Emil fixes the NACK check in ixgbevf_set_uc_addr_vf() for instances where the index is not equal to zero. Fixes an issue where mac->ops.setup_fc can be NULL for backplanes which can cause the driver to crash on load. Don fixes the second parameter of the LED functions, which is the index to the LED we are interested in affecting. Fixed variable to store register reads to unsigned integer. Adds support for the new x553 hardware into ixgbevf. Fixed a missing rtnl lock around ixgbevf_reinit_locked(). Fixed an issue where in ixgbevf_reset_subtask() was not verifying that the port has been removed. Cleans up the initial crosstalk fix, since the SFP that indicates the presence of a SFP+ module changes between hardware types. Babu Moger fixes typo in freeing IRQ, since the array subscript increments after the execution of the statement. Wei Yongjun adds the missing destroy_workqueue() before returning from ixgbe_init_module() in the error handling case. Tony adds range checking for setting the MTU from the VF, where the PF can return a NACK but this was not passed on to the VF, so propagate the results from the PF to the VF so errors can be reported. Consolidates mailbox read and write functions, since the recent changes to ixgbevf_write_msg_read_ack(), other functions are performing the same operations done here. Colin Ian King removes a redundant check on ret_val, since ret_val has not changed since the previous check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: cleanup crosstalk fixDon Skidmore2016-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch address a few issues with the initial crosstalk fix. Most important of which is the SDP that indicates the presents of a SFP+ module changes between HW types. With this change that is taken in to consideration It also moves the check closer to the base code that checks link. This makes it so we only need to do the check in one spot. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ixgbe: Add missing destroy_workqueue() on error in ixgbe_init_module()Wei Yongjun2016-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing destroy_workqueue() before return from ixgbe_init_module() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | ixgbe: Fix minor typo while freeing irqBabu Moger2016-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | The array subscript increments after the execution of the statement. So there is no issue here. However it helps to read the code better. Signed-off-by: Babu Moger <babu.moger@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-07-24
|\ \ \ | |/ / |/| | | | | | | | | | | Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: napi_poll must return the work donePaolo Abeni2016-07-15
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Currently the function ixgbe_poll() returns 0 when it clean completely the rx rings, but this foul budget accounting in core code. Fix this returning the actual work done, capped to weight - 1, since the core doesn't allow to return the full budget when the driver modifies the napi status Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | drivers/net: fixup comments after "Future-proof tunnel offload handlers"Sabrina Dubroca2016-07-11
| | | | | | | | | | | | | | | | | | Some comments weren't updated to reflect the renaming of ndo's and the change of arguments. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: Error handler for duplicate filter locations in hardware for cls_u32 ↵Amritha Nambiar2016-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | offloads For u32 classifier filters, avoid overwriting existing filter in a hardware location without removing it first, to clean up inconsistencies due to duplicate values for filter location. Verified with the following filters: Create child hash tables: handle 1: u32 divisor 1 handle 2: u32 divisor 1 Link to the child hash table from parent hash table: handle 800:0:11 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 15.0.0.1/32 handle 800:0:12 u32 ht 800: link 2: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 17 ff match ip dst 16.0.0.1/32 Add filter into child hash table: handle 1:0:3 u32 ht 1: \ match tcp src 22 ffff action drop Add another filter to the same location: handle 2:0:3 u32 ht 2: \ match tcp src 33 ffff action drop Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Fix deleting link filters for cls_u32 offloadsAmritha Nambiar2016-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On deleting filters which are links to a child hash table, the filters in the child hash table must be cleared from the hardware if there is no link between the parent and child hash table. Verified with the following filters: Create a child hash table: handle 1: u32 divisor 1 Link to the child hash table from parent hash table: handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 15.0.0.1/32 Add filters into child hash table: handle 1:0:2 u32 ht 1: \ match tcp src 22 ffff action drop handle 1:0:3 u32 ht 1: \ match tcp src 33 ffff action drop Delete link filter from parent hash table: handle 800:0:10 u32 Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck2016-06-17
|/ | | | | | | | | | | | | | | | | | | | | This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. In addition I updated the socket address family check so that instead of excluding IPv6 we instead abort of type is not IPv4. This makes much more sense as we should only be supporting IPv4 outer addresses on this hardware. The last change is that I pulled the rtnl_lock/unlock into the conditional statement for IXGBE_FLAG2_VXLAN_REREG_NEEDED. The motivation behind this is to avoid unneeded bouncing of the mutex which will just slow down the handling of this call anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* intel: Add support for IPv6 IP-in-IP offloadAlexander Duyck2016-05-20
| | | | | | | | | | This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: define gso types for IPx over IPv4 and IPv6Tom Herbert2016-05-20
| | | | | | | | | | | | | | | | This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix VLAN features errorAlexander Duyck2016-05-16
| | | | | | | | | | | | | | | | It looks like at some point I somehow transposed the location of setting the VLAN features in netdev->features and the configuration of the vlan_features. As a result the driver is now generating a warning about vlan_features being setup incorrectly. This patch corrects that by placing the update of netdev->features to include the VLAN features so that it is after the point where we write netdev->features into netdev->vlan_features. Fixes: b83e30104bd9 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: use correct mask when enabling sriovEmil Tantilov2016-05-16
| | | | | | | | | | Swap the parameters in GENMASK in order to generate the correct mask. This change fixes Tx hangs when enabling SRIOV. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge branch '10GbE' of ↵David S. Miller2016-05-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-05-04 This series contains updates to ixgbe, ixgbevf and traffic class helpers. Sridhar adds helper functions to the tc_mirred header to access tcf_mirred information and then implements them for ixgbe to enable redirection to a SRIOV VF or an offloaded MACVLAN device queue via tc 'mirred' action. Amritha adds support to set filters with multiple header fields (L3,L4) to match on. KY Srinivasan from Microsoft add Hyper-V support into ixgbevf. Emil adds 82599 sub-device IDs that were missing from the list of parts that support WoL. Then simplified the logic we use to determine WoL support by reading the EEPROM bits for MACs X540 and newer. Preethi cleaned up duplicate and unused device IDs. Fixed our ethtool stat reporting where we were ignoring higher 32 bits of stats registers, so fill out 64 bit stat values into two 32 bit words. Babu Moger from Oracle improves VF performance issues on SPARC. Alex Duyck cleans up some of the Hyper-V implementation from KY so that we can just use function pointers instead of having to identify if a given VF is running on a Linux or Windows PF. Usha makes sure that DCB and FCoE is disabled for X550EM_x/a MACs and cleans up the DCB initialization in the process. Tony cleans up the API for ixgbevf_update_xcast_mode() so we do not have to pass in the netdev parameter, since it was never used in the function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: Disable DCB and FCoE for X550EM_x and x550em_aUsha Ketineni2016-05-04
| | | | | | | | | | | | | | | | | | | | | | This patch adds IXGBE_FLAG_DCB_CAPABLE flag that is set for all MACs other than X550EM_x and x550em_a. DCB and FCoE is disabled for these MACS. DCB initialization code is moved to a separate function. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: check EEPROM for WOL support for X540 and aboveEmil Tantilov2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | This change aims to simplify the logic we use to determine WOL support by reading the EEPROM bits for MACs X540 and newer. Also some cleanups in ixgbe_wol_supported() - changed return type to bool and removed redundant return variable by simply using return after the checks. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: add WoL support for some 82599 subdevice IDsEmil Tantilov2016-05-04
| | | | | | | | | | | | | | | | | | | | We had some 82599 subdevice IDs missing from the list of parts that support WoL. Reported-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: Match on multiple headers for cls_u32 offloadsAmritha Nambiar2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support to set filters with multiple header fields (L3,L4)to match on. This is achieved in the following order: 1. Create a leaf hash table for the next header. 2. Create a link to the leaf hash table from the base hash table with matches on next header type and current header fields. 3. Add filter in leaf hash table with match on next header fields and action. Verified with the following filters : Match TCP and DIP: handle 1: u32 divisor 1 u32 ht 800: order 1 link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip protocol 6 ff match ip dst 10.0.0.1/32 match tcp src 28 ffff action drop Delete the filter: Match on DIP, SIP, UDP (SPort, DPort): handle 2: u32 divisor 1 u32 ht 800: order 2 link 2: \ offset at 0 mask 0f00 shift 6 plus 0 eat \ match ip dst 15.0.0.2/32 match ip protocol 17 ff \ match ip src 15.0.0.1/32 match udp src 30 ffff match udp dst 32 ffff action drop Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: Add support for redirect action to cls_u32 offloadsSridhar Samudrala2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables 'redirect' to a SRIOV VF or a offloaded macvlan device queue via tc 'mirred' action. Verified with the following script that creates SRIOV VFs, offloaded macvlan and adds tc u32 filters with redirect action to the associated netdevs. # add ingress qdisc. tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # create 4 sriov VFs and bring up the first one. echo 4 > /sys/class/net/p4p1/device/sriov_numvfs sleep 1 ip link set p4p1 up ip link set p4p1_0 up # create a offloaded macvlan device and bring it up. ethtool -K p4p1 l2-fwd-offload on ip link add link p4p1 name mvlan_1 type macvlan ip link set mvlan_1 up # add u32 filter with action to redirect to VF netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip src 192.168.1.3/32 \ action mirred egress redirect dev p4p1_0 # add u32 filter with action to redirect to macvlan netdev tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip src 192.168.2.3/32 \ action mirred egress redirect dev mvlan_1 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers: replace dev->trans_start accesses with dev_trans_startFlorian Westphal2016-05-04
|/ | | | | | | | | | | | | | | | | | | | | | a trans_start struct member exists twice: - in struct net_device (legacy) - in struct netdev_queue Instead of open-coding dev->trans_start usage to obtain the current trans_start value, use dev_trans_start() instead. This is not exactly the same, as dev_trans_start also considers the trans_start values of the netdev queues owned by the device and provides the most recent one. For legacy devices this doesn't matter as dev_trans_start can cope with netdev trans_start values of 0 (they are ignored). This is a prerequisite to eventual removal of dev->trans_start. Cc: linux-rdma@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe/ixgbevf: Add support for GSO partialAlexander Duyck2016-04-25
| | | | | | | | | | | | | | This patch adds support for partial GSO segmentation in the case of tunnels. Specifically with this change the driver an perform segmentation as long as the frame either has IPv6 inner headers, or we are allowed to mangle the IP IDs on the inner header. This is needed because we will not be modifying any fields from the start of the start of the outer transport header to the start of the inner transport header as we are treating them like they are just a block of IP options. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: resolve shift of negative value warningJacob Keller2016-04-25
| | | | | | | | | Make use of GENMASK instead of open coding the equivalent operation incorrectly. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: use BIT() macroJacob Keller2016-04-25
| | | | | | | | | | | | | | | | | Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add work around for empty SFP+ cage crosstalkDon Skidmore2016-04-25
| | | | | | | | | | | It is possible on some systems that crosstalk could lead to link flap on empty SFP+ cages. A new NVM bit was defined to let SW know it needs to implement the work around which consists of verifying that there is a module in the cage before acting on the LSC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add register wait for slow linksMark Rustad2016-04-25
| | | | | | | | | | Use a new register to wait for previous register writes to complete before issuing a register read. This is needed when slower links are in use. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: consolidate the configuration of spoof checkingEmil Tantilov2016-04-24
| | | | | | | | | | | | | | | | Consolidate the logic behind configuring spoof checking: Move the setting of the MAC, VLAN and Ethertype spoof checking into ixgbe_ndo_set_vf_spoofchk(). Change ixgbe_set_mac_anti_spoofing() to set MAC spoofing per VF similar to the VLAN and Ethertype functions - this allows us to call the helper functions in ixgbe_ndo_set_vf_spoofchk() for all spoof check types and only disable MAC spoof checking when creating MACVLAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: protect vxlan_get_rx_port in ixgbe_service_task with rtnl_lockHannes Frederic Sowa2016-04-21
| | | | | | | | | | | | | | | vxlan_get_rx_port requires rtnl_lock to be held. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Bump version numberMark Rustad2016-04-07
| | | | | | | | Update ixgbe version number. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add KR backplane support for x550em_aMark Rustad2016-04-07
| | | | | | | Add support for x550em_a-based KR backplane devices. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for SGMII backplane interfaceMark Rustad2016-04-07
| | | | | | | Add support for an SGMII backplane interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for SFPs with retimerMark Rustad2016-04-07
| | | | | | | | Add support for SFPs with an external retimer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for x550em_a 10G MAC typeMark Rustad2016-04-07
| | | | | | | | | | | Add support for x550em_a 10G MAC type to the ixgbe driver. The new MAC includes new firmware commands that need to be used to control PHY and IOSF access, so that support is also added. The interface supported is a native SFP+ interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for single-port X550 deviceMark Rustad2016-04-07
| | | | | | | | Add support for a single-port X550 device. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe/ixgbevf: Add support for bulk free in Tx cleanup & cleanup boolean logicAlexander Duyck2016-04-07
| | | | | | | | | | This patch enables bulk free in Tx cleanup for ixgbevf and cleans up the boolean logic in the polling routines for ixgbe and ixgbevf in the hopes of avoiding any mix-ups similar to what occurred with i40e and i40evf. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add support for toggling VLAN filtering flag via ethtoolAlexander Duyck2016-04-04
| | | | | | | | | | This change makes it so that we can use the ethtool rx-vlan-filter flag to toggle Rx VLAN filtering on and off. This is basically just an extension of the existing VLAN promisc work in that it just adds support for the additional ethtool flag. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-24 13:04:29 -0500