aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices/docg3.c
Commit message (Collapse)AuthorAge
* mtd: docg3: switch to mtd_ooblayout_opsBoris Brezillon2016-04-19
| | | | | | | | Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
* mtd: docg3: use mtd_set_ecclayout() where appropriateBoris Brezillon2016-04-19
| | | | | | | | Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
* mtd: kill the ecclayout->oobavail fieldBoris BREZILLON2016-03-07
| | | | | | | | | | ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: docg3: off by one in doc_register_sysfs()Dan Carpenter2015-10-26
| | | | | | | | | | | | | | | | | Smatch found a bug in the error handling: drivers/mtd/devices/docg3.c:1634 doc_register_sysfs() error: buffer overflow 'doc_sys_attrs' 4 <= 4 The problem is that if the very last device_create_file() fails, then we are beyond the end of the array. Actually, any time i == 3 then there is a problem. We can fix this an simplify the code at the same time by moving the !ret conditions out of the for loops and using a goto instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: devices: docg3: show parent device in sysfsFrans Klaver2015-10-13
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: docg3: Fix kasprintf() usageRichard Weinberger2015-06-16
| | | | | | | | kasprintf() does a dynamic memory allocation and can fail. We have to handle that case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: docg3: Don't leak docg3->bbt in error pathRichard Weinberger2015-06-16
| | | | | Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: constify of_device_id arrayFabian Frederick2015-05-07
| | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: docg3: remove invalid __exit annotationsBrian Norris2015-04-05
| | | | | | | | The .remove callback may be used when detaching a device via sysfs, so we can't expect to free up this memory. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
* mtd: docg3: drop dead codeBrian Norris2015-03-11
| | | | | | | | | If no devices were found, we would already have skipped over this code. Detected by Coverity, CID #744270 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
* Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtdLinus Torvalds2014-12-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "Summary: - Add device tree support for DoC3 - SPI NOR: Refactoring, for better layering between spi-nor.c and its driver users (e.g., m25p80.c) New flash device support Support 6-byte ID strings - NAND: New NAND driver for Allwinner SoC's (sunxi) GPMI NAND: add support for raw (no ECC) access, for testing purposes Add ATO manufacturer ID A few odd driver fixes - MTD tests: Allow testers to compensate for OOB bitflips in oobtest Fix a torturetest regression - nandsim: Support longer ID byte strings And more" * tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits) mtd: tests: abort torturetest on erase errors mtd: physmap_of: fix potential NULL dereference mtd: spi-nor: allow NULL as chip name and try to auto detect it mtd: nand: gpmi: add raw oob access functions mtd: nand: gpmi: add proper raw access support mtd: nand: gpmi: add gpmi_copy_bits function mtd: spi-nor: factor out write_enable() for erase commands mtd: spi-nor: add support for s25fl128s mtd: spi-nor: remove the jedec_id/ext_id mtd: spi-nor: add id/id_len for flash_info{} mtd: nand: correct the comment of function nand_block_isreserved() jffs2: Drop bogus if in comment mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy mtd: cafe_nand: drop duplicate .write_page implementation mtd: m25p80: Add support for serial flash Spansion S25FL132K MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids mtd: spi-nor: improve wait-till-ready timeout loop mtd: delete unnecessary checks before two function calls mtd: nand: omap: Fix NAND enumeration on 3430 LDP mtd: nand: add ATO manufacturer info ...
| * mtd: docg3: fix 'defined but not used' warningBrian Norris2014-10-22
| | | | | | | | | | | | | | | | | | | | With CONFIG_OF=n, we can see the following warning: drivers/mtd/devices/docg3.c:2122:28: warning: 'docg3_dt_ids' defined but not used [-Wunused-variable] static struct of_device_id docg3_dt_ids[] = { Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
| * mtd: docg3: add device-tree supportRobert Jarzmik2014-10-22
| | | | | | | | | | | | | | | | | | | | Add device-tree support. This is straightforward as docg3 only uses the standard IOMEM resources. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * docg3: Fix miuse of seq_printf return valueJoe Perches2014-10-22
| | | | | | | | | | | | | | | | seq_printf doesn't return a useful value, so remove these misuses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: devices: drop owner assignment from platform_driversWolfram Sang2014-10-20
|/ | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* mtd: Fixed checkpatch seq_printf warningsSamarth Parikh2014-08-19
| | | | | | | | | | | | | | | | | | | | | Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" This patch is created with reference to the ongoing lkml thread https://lkml.org/lkml/2014/7/15/646 where Andrew Morton wrote: " - puts is presumably faster - puts doesn't go rogue if you accidentally pass it a "%". - this patch would actually make compiled object files few bytes smaller. Perhaps because seq_printf() is a varargs function, forcing the caller to pass args on the stack instead of in registers. " Signed-off-by: Samarth Parikh <samarthp@ymail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.Rusty Russell2014-05-13
| | | | | | | | In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* mtd: docg3: Use devm_*() functionsJingoo Han2014-01-03
| | | | | | | Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtg: docg3: use free_bch() instead of kfree()Wei Yongjun2013-11-07
| | | | | | | | | Use free_bch() instead of kfree() to free init_bch() allocated data. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: doc: use module_platform_driver_probe()Jingoo Han2013-04-05
| | | | | | | | | This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: devices: add const qualifiersArtem Bityutskiy2013-04-05
| | | | | | | Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtg: docg3: potential divide by zero in doc_write_oob()Dan Carpenter2012-12-10
| | | | | | | | | | If we set oobdelta to zero then we will either return -EINVAL or hit a divide (modulus) by zero on the next line when we check "(ooblen % oobdelta)". It's better to just return -EINVAL here instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: use %*ph[CN] to dump small buffersAndy Shevchenko2012-09-29
| | | | | | | | | | There is new format specified that helps to dump small buffers. It makes the code simpler and nicer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds2012-06-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
| * mtd: docg3 fix in-middle of blocks readsRobert Jarzmik2012-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corner case reads do not work, and return false data and ECC. This case is typically seen in a ubifs usage, with a read of type: - docg3 docg3: doc_read_oob(from=14882415, mode=1, data=(c30eca40:12), oob=( (null):0)) This results in the following reads: - docg3 docg3: doc_read_data_area(buf= (null), len=111) - docg3 docg3: doc_read_data_area(buf=c30eca40, len=12) - docg3 docg3: doc_read_data_area(buf= (null), len=389) - docg3 docg3: doc_read_data_area(buf= (null), len=0) - docg3 docg3: doc_read_data_area(buf= (null), len=16) If we suppose that the pages content is : - bytes 0 .. 111 : 0x0a - bytes 112 .. 255 : 0x0f Then the returned bytes will be : - 111 times 0x0a (correct) - 0x0a 2 times and 0x0f 10 times (incorrect, should be 0x0a,0x0f) - 0x0f 389 times (correct) - nothing - correct OOB The reason seams that the first 111 bytes read ends between the 2 docg3 planes, and that the first following read (in the 12 bytes sequence, read of 16 bit word) returns the byte of the rightmost plane duplicated in high and lower byte of the word. Fix this behaviour by ensuring that if the previous read ended up in-between the 2 planes, there will be a first 1 byte read to get back to the beginning of leftmost plane. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEANMike Dunn2012-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers' _read() method, absent an error, returns a non-negative integer indicating the maximum number of bit errors that were corrected in any one region comprising an ecc step. MTD returns -EUCLEAN if this is >= bitflip_threshold, 0 otherwise. If bitflip_threshold is zero, the comparison is not made since these devices lack ECC and always return zero in the non-error case (thanks Brian)¹. Note that this is a subtle change to the driver interface. This and the preceding patches in this set were tested with ubi on top of the nandsim and docg4 devices, running the ubi test io_basic from mtd-utils. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040468.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge branch 'master' into for-nextJiri Kosina2012-04-08
|\| | | | | | | | | | | | | | | Merge with latest Linus' tree, as I have incoming patches that fix code that is newer than current HEAD of for-next. Conflicts: drivers/net/ethernet/realtek/r8169.c
| * mtd: docg3 add protection against concurrencyRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As docg3 is intolerant against reentrancy, especially because of its weird register access (ie. a register read is performed by a first register write), each access to the docg3 IO space must be locked. Lock the IO space with a mutex, shared by all chips on the same cascade, as they all share the same IO space. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3 refactor cascade floors structureRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | | | Group floors into a common cascade structure. This will provide a common structure to store common data to all cascaded docg3 chips, like IO addressing, locking protection. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3 increase write/erase timeoutRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | | | | | After several tries with ubifs, it appears empirically that constructor provided figures for erase/write timeouts are underestimated. A timeout of 100ms seems to work with a 5 years worn chip, and no timeouts occur anymore. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3 fix inbound calculationsRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | The last erase block was not accessible, as the out of bound check was incorrectly rejecting the last block. The read/write/erase offset checks were forbidding the usage of the last block, because of the calculation which was considering the byte after the last instead of the last byte. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: fix section mismatch for doc_probe_deviceRyosuke Saito2012-03-26
| | | | | | | | | | | | | | | | | | doc_probe_device() is only called from docg3_probe() which is in .init.text, so it must be in the same section to avoid a section mismatch warning. Signed-off-by: Ryosuke Saito <raitosyo@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: flash drivers set ecc strengthMike Dunn2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3 reduce read alignment burdenRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | The read function was so far requiring the reads to be aligned on page boundaries, and be page length multiples in size. Relieve these constraints to ease the userspace ubifs programs runs, which read ubifs headers of 64 bytes. Artem: squashed a later fix from Robert Jarzmik into this patch. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3 trivial renamingRobert Jarzmik2012-03-26
| | | | | | | | | | | | | | | | | | Change the name of the mtd so that it is simpler, and is easier to cope with by mtdparts. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: docg3: initialize writebufsizeArtem Bityutskiy2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set it to be equivalent to mtd->writesize because this is the maximum amount of data the driver writes at a time. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@kernel.org [3.2+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: add leading underscore to all mtd functionsArtem Bityutskiy2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtg: docg3: fix comment errorsOctavian Moraru2012-04-05
|/ | | | | | | | | occured ==> occurred successfull ==> successful adressing ==> addressing Signed-off-by: Octavian Moraru <octmoraru@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* mtd: doc: do not initialize mtd_info fields to 0 or NULLArtem Bityutskiy2012-01-09
| | | | | | | | | The 'struct mtd_info' object is allocated with 'kzalloc()', so it contains only zeroes - no need to initialize various fields to 0 or NULL. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: remove unused functionRobert Jarzmik2012-01-09
| | | | | | | | | | | | | | As the MTD api has no use for the number of erase cycles each block has endured, remove the function which calculated that value. If one day MTD api finds it usefull for wear levelling algorithms to have this information, the function should be put back in place. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: fixes and cleanupsRobert Jarzmik2012-01-09
| | | | | | | | | This patch takes into account checkpatch, sparse and ECC comments. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: dereferencing an ERR_PTR() in docg3_probe()Dan Carpenter2012-01-09
| | | | | | | | | | | | | | If doc_probe_device() returned an ERR_PTR, then we accidentally saved that to docg3_floors[floor] = mtd; which gets derefenced in the error handling when we call doc_release_device(). I've reworked the error handling to take care of that and hopefully make it a little simpler. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add protection areas sysfs accessRobert Jarzmik2012-01-09
| | | | | | | | | | | | As each docg3 chip has 2 protection areas (DPS0 and DPS1), and because theses areas can prevent user access to the chip data, add for each floor the sysfs entries which insert the protection key into the right DPS. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add fast modeRobert Jarzmik2012-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Docg3 chips can work in 3 modes : normal MLC mode, fast mode and reliable mode. Normally, as docg3 is a MLC chip, it should be configured to work in normal mode. In both normal mode, each page is distinct. This means that writing to page 12 of blocks 14,15 writes only to that page, and reading from page 12 of blocks 14,15 reads only from that page. In reliable and fast modes, pages are coupled by pairs, and are clones one of each other. This means that the available capacity of the chip is halved. Pages are coupled in each block, and page of index 2*n contains the same data as page 2*n+1 of the same block. In fast mode, the reads occur a bit faster, but are a bit less reliable that in normal mode. When reading from page 2*n, the chip reads bytes from both page 2*n and page 2*n+1, makes a logical and for each byte, and returns the result. As programming a page means "clearing bits", even if a bit was not cleared on one page because the flash is worn out, the other page has the bit cleared, and the result of the "AND" gives a correct result. When writing to page 2*n, the chip writes data to both page 2*n and page 2*n+1. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add suspend and resumeRobert Jarzmik2012-01-09
| | | | | | | | | | Add functions to powerdown and powerup from suspend, in order to save power. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add ECC correction codeRobert Jarzmik2012-01-09
| | | | | | | | | | | | | | | | Credit for discovering the BCH algorith parameters, and bit reversing algorithm is to be give to Mike Dunn and Ivan Djelic. The BCH correction code relied upon the BCH library, where all data and ECC is bit-reversed. The BCH library works correctly when each input byte is bit-reversed, and accordingly ECC output is also bit-reversed. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: map erase and write functionsRobert Jarzmik2012-01-09
| | | | | | | | | | Map the developped write and erase functions into the mtd structure. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add erase functionsRobert Jarzmik2012-01-09
| | | | | | | | | | | Add erase capability to the docg3 driver. The erase block is made of 2 physical blocks, as both share all 64 pages. That makes an erase block of at least 64 kBytes. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add write functionsRobert Jarzmik2012-01-09
| | | | | | | | | | | | Add write capability to the docg3 driver. The writes are possible on a single page (512 bytes + 16 bytes), even if that page is split on 2 physical pages on 2 blocks (each on one plane). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg3: add OOB layout to mtdinfoRobert Jarzmik2012-01-09
| | | | | | | | | | Add OOB layout description for docg3, so that userspace can use this information to setup the data for write_oob(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-02 17:23:48 -0400