aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/analogix
Commit message (Collapse)AuthorAge
* drm/bridge: analogix dp: Fix runtime PM state on driver bindMarek Szyprowski2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f0a8b49c03d22a511a601dc54b2a3425a41e35fa upstream. Analogix_dp_bind() can be called from component framework, which doesn't guarantee proper runtime PM state of the device during bind operation, so ensure that device is runtime active before doing any register access. This ensures that the power domain, to which DP module belongs, is turned on. While at it, also fix the unbalanced call to phy_power_on() in analogix_dp_bind() function. This patch solves the following kernel oops on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 75 Comm: kworker/0:2 Not tainted 4.9.0 #1046 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func task: ee272300 task.stack: ee312000 PC is at analogix_dp_enable_sw_function+0x18/0x2c LR is at analogix_dp_init_dp+0x2c/0x50 ... [<c03fcb38>] (analogix_dp_enable_sw_function) from [<c03fa9c4>] (analogix_dp_init_dp+0x2c/0x50) [<c03fa9c4>] (analogix_dp_init_dp) from [<c03fab6c>] (analogix_dp_bind+0x184/0x42c) [<c03fab6c>] (analogix_dp_bind) from [<c03fdb84>] (component_bind_all+0xf0/0x218) [<c03fdb84>] (component_bind_all) from [<c03ed64c>] (exynos_drm_load+0x134/0x200) [<c03ed64c>] (exynos_drm_load) from [<c03d5058>] (drm_dev_register+0xa0/0xd0) [<c03d5058>] (drm_dev_register) from [<c03d66b8>] (drm_platform_init+0x58/0xb0) [<c03d66b8>] (drm_platform_init) from [<c03fe0c4>] (try_to_bring_up_master+0x14c/0x188) [<c03fe0c4>] (try_to_bring_up_master) from [<c03fe188>] (component_add+0x88/0x138) [<c03fe188>] (component_add) from [<c0403a38>] (platform_drv_probe+0x50/0xb0) [<c0403a38>] (platform_drv_probe) from [<c0402470>] (driver_probe_device+0x1f0/0x2a8) [<c0402470>] (driver_probe_device) from [<c0400a54>] (bus_for_each_drv+0x44/0x8c) [<c0400a54>] (bus_for_each_drv) from [<c04021f8>] (__device_attach+0x9c/0x100) [<c04021f8>] (__device_attach) from [<c04018e8>] (bus_probe_device+0x84/0x8c) [<c04018e8>] (bus_probe_device) from [<c0401d1c>] (deferred_probe_work_func+0x60/0x8c) [<c0401d1c>] (deferred_probe_work_func) from [<c012fc14>] (process_one_work+0x120/0x318) [<c012fc14>] (process_one_work) from [<c012fe34>] (process_scheduled_works+0x28/0x38) [<c012fe34>] (process_scheduled_works) from [<c0130048>] (worker_thread+0x204/0x4ac) [<c0130048>] (worker_thread) from [<c01352c4>] (kthread+0xd8/0xf4) [<c01352c4>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) Code: e59035f0 e5935018 f57ff04f e3c55001 (f57ff04e) ---[ end trace 3d1d0d87796de344 ]--- Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1483091866-1088-1-git-send-email-m.szyprowski@samsung.com Cc: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/bridge: Drop drm_connector_unregister and call drm_connector_cleanup ↵Marek Vasut2016-10-10
| | | | | | | | | | | | directly Drop unneeded drm_connector_unregister() and remove the unnecessary wrapper functions around drm_connector_cleanup(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161005143133.5549-1-marex@denx.de
* drm/bridge: analogix_dp: Add analogix_dp_psr_supportedTomeu Vizoso2016-10-04
| | | | | | | | | | | So users know whether PSR should be enabled or not. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1474639600-30090-1-git-send-email-tomeu.vizoso@collabora.com
* drm: bridge: analogix/dp: mark symbols static where possibleBaoyou Xie2016-09-25
| | | | | | | | | | | | | | We get 2 warnings when building kernel with W=1: drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1053:5: warning: no previous prototype for 'analogix_dp_get_modes' [-Wmissing-prototypes] drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1097:1: warning: no previous prototype for 'analogix_dp_detect' [-Wmissing-prototypes] In fact, both functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks both functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474788764-6069-1-git-send-email-baoyou.xie@linaro.org
* drm/bridge: analogix_dp: Improve panel on timeSean Paul2016-09-24
| | | | | | | | | | | | | | | | In order to reduce the time required to turn on the panel, this patch makes 2 assumptions: 1- In detect(): if there's a panel, we're connected. 2- In get_modes(): if there's a panel, let the panel driver decide if it should prepare/unprepare in order to get the modes. The first is straightforward, and shouldn't need further explanation. The second should eliminate the prepare/unprepare delays from get_modes() in most cases, since panels generally hardcode their modes in the driver as opposed to reading EDID. If a panel does need to read EDID, it should be responsible for ensuring it's in a state in which it can. Signed-off-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: Don't read EDID if panel presentSean Paul2016-09-24
| | | | | | | | | | | | If there's a panel connected to the analogix_dp bridge, rely on the panel driver for modes, rather than reading EDID *and* calling get_modes() on the panel. This allows panels with a valid EDID to read it in the panel driver (e.g. simple_panel), and panels with invalid EDID to homebrew modes in their get_modes implementation. Signed-off-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: Remove duplicated codeTomeu Vizoso2016-09-24
| | | | | | | | | | | | | | | | | | | | Remove code for reading the EDID and DPCD fields and use the helpers instead. Besides the obvious code reduction, other helpers are being added to the core that could be used in this driver and will be good to be able to use them instead of duplicating them. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Yakir Yang <ykk@rock-chips.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org>
* drm/bridge: analogix_dp: squash lines for simple wrapper functionsMasahiro Yamada2016-09-15
| | | | | | | | | | Remove unneeded variables and assignments. Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [seanpaul added analogix prefix to subject] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473863952-7658-4-git-send-email-yamada.masahiro@socionext.com
* drm/bridge: analogix_dp: add the PSR function supportYakir Yang2016-08-23
| | | | | | | | | | | | | | | The full name of PSR is Panel Self Refresh, panel device could refresh itself with the hardware framebuffer in panel, this would make lots of sense to save the power consumption. This patch have exported two symbols for platform driver to implement the PSR function in hardware side: - analogix_dp_active_psr() - analogix_dp_inactive_psr() Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: Ensure the panel is properly prepared/unpreparedSean Paul2016-08-23
| | | | | | | | | | | | Instead of just preparing the panel on bind, actually prepare/unprepare during modeset/disable. The panel must be prepared in order to read hpd status and edid, so we need to keep state around the prepares in order to ensure we don't accidentally turn the panel off at the wrong time. Reviewed-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: fix no drm hpd event when panel plug inYakir Yang2016-07-05
| | | | | | | | | | | | | | | | | | The enum value of DP_IRQ_TYPE_HP_CABLE_IN is zero, but driver only send drm hp event when the irq_type and the enum value is true. if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN || ...) drm_helper_hpd_irq_event(dp->drm_dev); So there would no drm hpd event when cable plug in, to fix that just need to assign all hotplug enum with no-zero values. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
* drm/bridge: analogix_dp: passing the connector as an argument in .get_modes()Yakir Yang2016-07-05
| | | | | | | | | It's better to pass the connector to platform driver in .get_modes() callback, just like what the .get_modes() helper function designed. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
* drm/rockchip: analogix_dp: add rk3399 eDP supportYakir Yang2016-07-05
| | | | | | | | | | RK3399 and RK3288 shared the same eDP IP controller, only some light difference with VOP configure and GRF configure. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Acked-by: Mark Yao <mark.yao@rock-chips.com> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com> Reviewed-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit settingYakir Yang2016-07-04
| | | | | | | | | | | | | | As vendor document indicate, when REF_CLK bit set 0, then DP phy's REF_CLK should switch to 24M source clock. But due to IC PHY layout mistaken, some chips need to flip this bit(like RK3288), and unfortunately they didn't indicate in the DP version register. That's why we have to make this little hack. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org>
* drm/bridge: analogix_dp: correct the register bit define error in ↵Yakir Yang2016-07-04
| | | | | | | | | | | | | | | | ANALOGIX_DP_PLL_REG_1 There're an register define error in ANALOGIX_DP_PLL_REG_1 which introduced by commit bcec20fd5ad6 ("drm: bridge: analogix/dp: add some rk3288 special registers setting"). The PHY PLL input clock source is selected by ANALOGIX_DP_PLL_REG_1 BIT 0, not BIT 1. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
* drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable timeYakir Yang2016-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It may caused a dead lock if we flush the hpd work in bridge disable time. The normal flow would like: IN --> DRM IOCTL 1. Acquire crtc_ww_class_mutex (DRM IOCTL) IN --> analogix_dp_bridge 2. Acquire hpd work lock (Flush hpd work) 3. HPD work already in idle, no need to run the work function. OUT <-- analogix_dp_bridge OUT <-- DRM IOCTL The dead lock flow would like: IN --> DRM IOCTL 1. Acquire crtc_ww_class_mutex (DRM IOCTL) IN --> analogix_dp_bridge 2. Acquire hpd work lock (Flush hpd work) IN --> analogix_dp_hotplug IN --> drm_helper_hpd_irq_event 3. Acquire mode_config lock (This lock already have been acquired in previous step 1) ** Dead Lock Now ** It's wrong to flush the hpd work in bridge->disable time, I guess the original code just want to ensure the delay work must be finish before encoder disabled. The flush work in bridge disable time is try to ensure the HPD event won't be missed before display card disabled, actually we can take a fast respond way(interrupt thread) to update DRM HPD event to fix the delay update and possible dead lock. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume timeYakir Yang2016-04-04
| | | | | | | | | | | Turn off the panel power in suspend time would help to reduce power waste. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: add edid modes parse in get_modes methodYakir Yang2016-04-04
| | | | | | | | | | | | | | | | | | | | Display Port monitor could support kinds of mode which indicate in monitor edid, not just one single display resolution which defined in panel or devivetree property display timing. Note: Gustavo Padovan try to remove the controller and phy power on function in bind time at bellow commit: drm/exynos: do not start enabling DP at bind() phase But for now driver need to read edid message in .get_modes() function, so controller must be inited in bind time, so we need to add controller init back. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: move hpd detect to connector detect functionYakir Yang2016-04-04
| | | | | | | | | | | | | | | | | | | | | This change just make a little clean to make code more like drm core expect, move hdp detect code from bridge->enable(), and place them into connector->detect(). Note: Gustavo Padovan try to remove the controller and phy power on function in bind time at bellow commit: drm/exynos: do not start enabling DP at bind() phase But for now the connector status don't hardcode to connected, need to operate dp phy in .detect function, so we need to revert parts if Gustavo Padovan's changes, add phy poweron function in bind time. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: try force hpd after plug in lookup failedYakir Yang2016-04-04
| | | | | | | | | | | | | | | Some edp screen do not have hpd signal, so we can't just return failed when hpd plug in detect failed. This is an hardware property, so we need add a devicetree property "analogix,need-force-hpd" to indicate this sutiation. Acked-by: Rob Herring <robh@kernel.org> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288Yakir Yang2016-04-04
| | | | | | | | | | There are some IP limit on rk3288 that only support 4 physical lanes of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: add some rk3288 special registers settingYakir Yang2016-04-04
| | | | | | | | | | RK3288 need some special registers setting, we can separate them out by the dev_type of plat_data. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_rangeYakir Yang2016-04-04
| | | | | | | | | | | | | | | | Both hsync/vsync polarity and interlace mode can be parsed from drm display mode, and dynamic_range and ycbcr_coeff can be judge by the video code. But presumably Exynos still relies on the DT properties, so take good use of mode_fixup() in to achieve the compatibility hacks. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: remove duplicate configuration of link rate and ↵Yakir Yang2016-04-04
| | | | | | | | | | | | | | | | | link count link_rate and lane_count already configured in analogix_dp_set_link_train(), so we don't need to config those repeatly after training finished, just remove them out. Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: fix some obvious code styleYakir Yang2016-04-04
| | | | | | | | | | | | | | Fix some obvious alignment problems, like alignment and line over 80 characters problems, make this easy to be maintained later. Acked-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: rename register constantsHeiko Stuebner2016-04-04
| | | | | | | | | | | | In the original split we kept the register constants intact to keep the diff small. Still the constants are Analogix-specific, so rename them now. Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* drm: bridge: analogix/dp: split exynos dp driver to bridge directoryYakir Yang2016-04-04
Split the dp core driver from exynos directory to bridge directory, and rename the core driver to analogix_dp_*, rename the platform code to exynos_dp. Beside the new analogix_dp driver would export six hooks. "analogix_dp_bind()" and "analogix_dp_unbind()" "analogix_dp_suspned()" and "analogix_dp_resume()" "analogix_dp_detect()" and "analogix_dp_get_modes()" The bind/unbind symbols is used for analogix platform driver to connect with analogix_dp core driver. And the detect/get_modes is used for analogix platform driver to init the connector. They reason why connector need register in helper driver is rockchip drm haven't implement the atomic API, but Exynos drm have implement it, so there would need two different connector helper functions, that's why we leave the connector register in helper driver. Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-03 17:03:22 -0400