aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/stih407-family.dtsi
Commit message (Collapse)AuthorAge
* ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirkPatrice Chotard2017-04-12
| | | | | | | | | | | | | | | | | | | [ Upstream commit 8413299cb3933dade6186bbee8363f190032107e ] Since v4.10-rc1, the following logs appears in loop : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) [ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 806.096494] usb usb6-port1: cannot disable (err = -32) After analysis, xhci try to set link in U3 and returns an error. Using snps,dis_u3_susphy_quirk fix this issue. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: STiH407-family: fix i2c nodesLoic Pallardy2016-11-23
| | | | | | | | The I2C nodes are missing #address-cells and #size-cells. This is causing warning at device tree compilation when some I2C device sub-nodes are defined. Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
* Merge tag 'media/v4.9-1' of ↵Linus Torvalds2016-10-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...
| * Merge tag 'v4.8' into patchworkMauro Carvalho Chehab2016-10-05
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...
| * | [media] add stih-cec driver into DTBenjamin Gaignard2016-09-19
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* | | Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-10-08
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets, Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform, Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file), Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits) ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ...
| * | ARM: STi: DT: STiH407: Add uniperif reader dt nodesPeter Griffin2016-09-14
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the DT node for the uniperif reader IP block found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
| * | ARM: STi: DT: STiH407: Add uniperif player dt nodesPeter Griffin2016-09-14
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the DT nodes for the uniperif player IP blocks found on STiH407 family silicon. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
| * | ARM: STi: DT: STiH407: Add sti-sasg-codec dt nodePeter Griffin2016-09-14
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the dt node for the internal audio codec IP. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
| * | ARM: STi: DT: STiH407: Add FDMA driver dt nodes.Peter Griffin2016-09-14
| | | | | | | | | | | | | | | | | | | | | | | | These nodes are required to get the fdma driver working on STiH407 based silicon. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: dts: STiH407: Supply PWM Capture IRQLee Jones2016-09-06
| | | | | | | | | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | ARM: dts: STiH407-family: Add ports-implemented property in sata nodesPatrice Chotard2016-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite ST AHCI version = 1.3, reading HOST_PORTS_IMPL returns 0. So force HOST_PORTS_IMPL to 1 by using ports-implemented DT property. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
| * | ARM: dts: STiH407: Move non-removable property to board filePatrice Chotard2016-09-02
| |/ | | | | | | | | | | | | | | | | | | Due to 96board which uses mmc0 node for SD card, the non-removable property must be moved from STiH407-family to board file for B2120 and B2199 boards. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
* / ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCILee Jones2016-09-08
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The STiH4{07,10} platform contains some interconnect clocks which are used by various IPs. If these clocks aren't handled correctly by ST's SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. Cc: stable@vger.kernel.org Tested-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com>
* ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodesLee Jones2016-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a non-booting issue in Mainline. When booting with a compressed kernel, we need to be careful how we populate memory close to DDR start. AUTO_ZRELADDR is enabled by default in multi-arch enabled configurations, which place some restrictions on where the kernel is placed and where it will be uncompressed to on boot. AUTO_ZRELADDR takes the decompressor code's start address and masks out the bottom 28 bits to obtain an address to uncompress the kernel to (thus a load address of 0x42000000 means that the kernel will be uncompressed to 0x40000000 i.e. DDR START on this platform). Even changing the load address to after the co-processor's shared memory won't render a booting platform, since the AUTO_ZRELADDR algorithm still ensures the kernel is uncompressed into memory shared with the first co-processor (0x40000000). Another option would be to move loading to 0x4A000000, since this will mean the decompressor will decompress the kernel to 0x48000000. However, this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of memory would essentially be wasted for no good reason. Until we can work with ST to find a suitable memory location to relocate co-processor shared memory, let's disable the shared memory nodes. This will ensure a working platform in the mean time. NB: The more observant of you will notice that we're leaving the DMU shared memory node enabled; this is because a) it is the only one in active use at the time of this writing and b) it is not affected by the current default behaviour which is causing issues. Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory) Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: STi: STih407: Switch LPC mode from RTC to ClocksourceLee Jones2016-04-26
| | | | | | | This aligns with the internal configuration. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STiH407: Move over to using the 'reserved-memory' API for ↵Lee Jones2016-04-26
| | | | | | | | | | | | | | obtaining DMA memory Doing so saves quite a bit of code in the driver. For more information on the 'reserved-memory' bindings see: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt Suggested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STiH407: Add nodes for RemoteProcLee Jones2016-04-26
| | | | | | Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STi: stih407-family: Add nodes for MailboxLee Jones2016-04-26
| | | | | | | | | This patch supplies the Mailbox Controller nodes. In order to request channels, these nodes will be referenced by Mailbox Client nodes. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STi: STiH407: Provide CPU with a means to look-up Major numberLee Jones2016-04-26
| | | | | | | This is used for CPU Frequency Scaling. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STi: STiH407: Link CPU with its voltage supplyLee Jones2016-04-26
| | | | | | | Used for Voltage Scaling using CPUFreq. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STi: STiH407: Provide CPU with clocking informationLee Jones2016-04-26
| | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: dts: STi: STiH407: Provide generic (safe) DVFS configurationLee Jones2016-04-26
| | | | | | | | | | | | You'll notice that the voltage cell is populated with 0's. Voltage information is very platform specific, even depends on 'cut' and 'substrate' versions. Thus it is left blank for a generic (safe) implementation. If other nodes/properties are provided by the bootloader, the ST CPUFreq driver will over-ride these generic values. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-11-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
| * ARM: dts: Add Ethernet node to STiH407 familyMaxime Coquelin2015-10-15
| | | | | | | | | | | | STiH407 family uses the Synopsys IP. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: STi: STiH407: Enable the 2 HW Random Number Generators for STiH4{07, 10}Lee Jones2015-10-01
| | | | | | | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: STi: STiH407: Add spi default pinctrl groups.Peter Griffin2015-09-30
| | | | | | | | | | | | | | | | | | | | | | Now we have default pinconfig groups for each SPI controller ensure it is used by the SPI controller node. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: dts: stih407/410: Tidy up display nodesMaxime Coquelin2015-09-29
| | | | | | | | | | | | | | | | | | The display nodes are common to both STiH407 and STiH410, move them to the family file. Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: dts: stih407: Enable PWM nodes only board levelMaxime Coquelin2015-09-29
| | | | | | | | | | | | | | | | The PWM may not be used on some boards, so enable them only the board file. Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* | ARM: STi: STiH407: Enable the 2 HW Random Number Generators for STiH4{07, 10}Lee Jones2015-09-21
|/ | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-09-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
| * ARM: STi: STiH407: Add PWM Regulator nodeLee Jones2015-07-22
| | | | | | | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-familyLee Jones2015-07-22
| | | | | | | | | | | | | | This also incorporates the STiH410. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
| * ARM: STi: DT: STiH407: Add cpu-release-addr dt property.Peter Griffin2015-07-22
| | | | | | | | | | | | | | | | | | To enable SMP when booting via u-boot we need to specify the newly implemented cpu-release-addr DT property. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* | ARM: STi: DT: Move reset controller constants into common locationPhilipp Zabel2015-08-03
|/ | | | | | | | | By popular vote, the DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the STi reset constants in there, too, to avoid confusion. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Patrice Chotard <patrice.chotard@st.com>
* ARM: STi: STiH407: Enable PMU IRQsLee Jones2015-05-13
| | | | | | | | | | | This driver is used to enable System Configuration Register controlled External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs prior to use. Here we are enabling PMU IRQs on both channels. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: STiH407: Enable Cortex-A9 PMU supportLee Jones2015-05-13
| | | | | | | This is ARM's generic Performance Monitoring Unit. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: STiH407: Add Restart support for STiH407Lee Jones2015-05-13
| | | | | Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.Peter Griffin2015-05-07
| | | | | | | | | | | Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code are all present upstream, we can add the dwc3 DT node and have a working usb3 controller on stih407-b2120 and stih410-b2020. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers usb2 phyPeter Griffin2015-05-07
| | | | | | | | | Ths picophyreset is incorrectly defined, which stops the usb2 phy being taken out of reset. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: DT: STi: STiH407: Add sata DT nodes.Peter Griffin2015-04-30
| | | | | | | | | | | | | Now that the miphy28lp is upstream, we can add the sata dt nodes for stih407 family silicon. This has been tested on b2120 board J4 (sata0 channel). These nodes are disabled by default as a special mini pci-e to sata daughter board is required which isn't shipped with the board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: DT: STiH407: Add Device Tree node for the LPCLee Jones2015-04-30
| | | | | | | | | | On current ST platforms the LPC controls a number of functions. This patch enables support for the LPC Watchdog and LPC RTC devices on LPC1 and LPC2 respectively. Signed-off-by: David Paris <david.paris@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.Peter Griffin2015-04-30
| | | | | | | | | The nodes have been split to allow as much commonality as possible. The stih407 has a silicon bug with eMMC UHS modes (with top regs) and as such doesn't have any of the uhs dt properties. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: sti: Provide DT nodes for SBC SSC[0..2]Lee Jones2015-04-29
| | | | | | | | | The Synchronous Serial Controller is used to provide SPI. These are the ports which are located on the Stand-By Controller (SBC). Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: sti: Provide DT nodes for SSC[0..4]Lee Jones2015-04-29
| | | | | | | The Synchronous Serial Controller is used to provide SPI. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: DT: STi: STiH407: Add DT node for MiPHY28lpGabriel FERNANDEZ2015-01-16
| | | | | | | | | | The MiPHY28lp is a Generic PHY which can serve various SATA, PCIe or USB3 devices. The two first ports can be use for either; both SATA, both PCIe or one of each in any configuration. The Third port is only for USB3. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: DT: STiH407: Add usb2 picophy dt nodesPeter Griffin2015-01-09
| | | | | | | | | | This patch adds the dt nodes for the usb2 picophy found on the stih407 device family. It is used on stih407 by the dwc3 usb3 controller when controlling usb2/1.1 devices. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
* ARM: STi: DT: STih407: Abstract common dt nodes into shared files.Peter Griffin2014-11-18
The stih410 soc which will be added in the following commit is very similar to the stih407, to enable maximum re-use of the dt files this commit abstracts the common parts into a shared dt file stihxxx-b2120 for the board, and also a shared file stih407-family.dtsi for the SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-10 10:16:32 -0400