1 files changed, 0 insertions, 162 deletions

diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
deleted file mode 100644
index 0ff4be72a809..000000000000
--- a/arch/arm/mach-ux500/board-u5500.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-        /* I2C */
-        GPIO218_I2C2_SCL        | PIN_INPUT_PULLUP,
-        GPIO219_I2C2_SDA        | PIN_INPUT_PULLUP,
-
-        /* DISPLAY_ENABLE */
-        GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-        /* Backlight Enbale */
-        GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
-        /*                              \
-         * slave data setup time, which is      \
-         * 250 ns,100ns,10ns which is 14,6,2    \
-         * respectively for a 48 Mhz    \
-         * i2c clock                    \
-         */                             \
-        .slsu           = _slsu,        \
-        /* Tx FIFO threshold */         \
-        .tft            = _tft,         \
-        /* Rx FIFO threshold */         \
-        .rft            = _rft,         \
-        /* std. mode operation */       \
-        .clk_freq       = clk,          \
-        .sm             = _sm,          \
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
-        .mode = LM3530_BL_MODE_MANUAL,
-        .als_input_mode = LM3530_INPUT_ALS1,
-        .max_current = LM3530_FS_CURR_26mA,
-        .pwm_pol_hi = true,
-        .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
-        .brt_ramp_law = 1,      /* Linear */
-        .brt_ramp_fall = LM3530_RAMP_TIME_8s,
-        .brt_ramp_rise = LM3530_RAMP_TIME_8s,
-        .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
-        .als2_resistor_sel = LM3530_ALS_IMPD_Z,
-        .als_vmin = 730,        /* mV */
-        .als_vmax = 1020,       /* mV */
-        .brt_val = 0x7F,        /* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
-        {
-                /* Backlight */
-                I2C_BOARD_INFO("lm3530-led", 0x36),
-                .platform_data = &u5500_als_platform_data,
-        },
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
-        db5500_add_i2c2(parent, &u5500_i2c2_data);
-        i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
-        .irq = {
-                .base = 0,
-                .count = 0,
-        },
-        .init_settings = NULL,
-        .init_settings_sz = 0,
-        .pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
-        .name = "ab5500-core",
-        .id = 0,
-        .dev = {
-                .platform_data = &ab5500_plf_data,
-        },
-        .num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
-        &ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
-        db5500_add_uart0(parent, NULL);
-        db5500_add_uart1(parent, NULL);
-        db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
-        struct device *parent = NULL;
-        int i;
-
-        parent = u5500_init_devices();
-        nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
-        u5500_i2c_init(parent);
-        u5500_sdi_init(parent);
-        u5500_uart_init(parent);
-
-        for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
-                u5500_platform_devices[i]->dev.parent = parent;
-
-        platform_add_devices(u5500_platform_devices,
-                ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-        .atag_offset    = 0x100,
-        .map_io         = u5500_map_io,
-        .init_irq       = ux500_init_irq,
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
-        .init_machine   = u5500_init_machine,
-MACHINE_END