1 files changed, 36 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
new file mode 100644
index 000000000000..ce06435d28ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -0,0 +1,36 @@
+* Amlogic GXBB Clock and Reset Unit
+
+The Amlogic GXBB clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,gxbb-clkc"
+- reg: physical base address of the clock controller and length of memory
+       mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
+used in device tree sources.
+
+Example: Clock controller node:
+
+        clkc: clock-controller@c883c000 {
+                #clock-cells = <1>;
+                compatible = "amlogic,gxbb-clkc";
+                reg = <0x0 0xc883c000 0x0 0x3db>;
+        };
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+        uart_AO: serial@c81004c0 {
+                compatible = "amlogic,meson-uart";
+                reg = <0xc81004c0 0x14>;
+                interrupts = <0 90 1>;
+                clocks = <&clkc CLKID_CLK81>;
+                status = "disabled";
+        };