7 files changed, 16 insertions, 0 deletions

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0d955ffaf44e..a09c06ba046c 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -30,6 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/mmci.h>
 #include <linux/pm_runtime.h>
+#include <linux/types.h>
 
 #include <asm/div64.h>
 #include <asm/io.h>
@@ -370,6 +371,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
                 .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
                 .src_maxburst = variant->fifohalfsize >> 2, /* # of words */
                 .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */
+                .device_fc = false,
         };
         struct dma_chan *chan;
         struct dma_device *device;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f35b6bad0476..68b69a91e5ef 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -33,6 +33,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <asm/dma.h>
 #include <asm/irq.h>
@@ -711,6 +712,7 @@ static int mxcmci_setup_dma(struct mmc_host *mmc)
         config->src_addr_width = 4;
         config->dst_maxburst = host->burstlen;
         config->src_maxburst = host->burstlen;
+        config->device_fc = false;
 
         return dmaengine_slave_config(host->dma, config);
 }
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 8418eb036651..04d6c1b31383 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/types.h>
 
 #include "spi-dw.h"
 
@@ -136,6 +137,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
         txconf.dst_maxburst = LNW_DMA_MSIZE_16;
         txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
         txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+        txconf.device_fc = false;
 
         txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
                                        (unsigned long) &txconf);
@@ -158,6 +160,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
         rxconf.src_maxburst = LNW_DMA_MSIZE_16;
         rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
         rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+        rxconf.device_fc = false;
 
         rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
                                        (unsigned long) &rxconf);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 2f9cb43a2398..1dc667f8a305 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -901,10 +901,12 @@ static int configure_dma(struct pl022 *pl022)
         struct dma_slave_config rx_conf = {
                 .src_addr = SSP_DR(pl022->phybase),
                 .direction = DMA_DEV_TO_MEM,
+                .device_fc = false,
         };
         struct dma_slave_config tx_conf = {
                 .dst_addr = SSP_DR(pl022->phybase),
                 .direction = DMA_MEM_TO_DEV,
+                .device_fc = false,
         };
         unsigned int pages;
         int ret;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae024025ff3..db7f88a1bdee 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -51,6 +51,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
+#include <linux/types.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -270,6 +271,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                 .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
                 .direction = DMA_MEM_TO_DEV,
                 .dst_maxburst = uap->fifosize >> 1,
+                .device_fc = false,
         };
         struct dma_chan *chan;
         dma_cap_mask_t mask;
@@ -303,6 +305,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                         .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
                         .direction = DMA_DEV_TO_MEM,
                         .src_maxburst = uap->fifosize >> 1,
+                        .device_fc = false,
                 };
 
                 chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 97cb45916c43..2a36bf37d7aa 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -115,6 +115,7 @@ static bool ux500_configure_channel(struct dma_channel *channel,
         slave_conf.dst_addr = usb_fifo_addr;
         slave_conf.dst_addr_width = addr_width;
         slave_conf.dst_maxburst = 16;
+        slave_conf.device_fc = false;
 
         dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
                                              (unsigned long) &slave_conf);
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 1acfd25e107d..52b0dedbf996 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -108,6 +109,8 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
                 return 0;
         }
 
+        slave_config.device_fc = false;
+
         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                 slave_config.direction = DMA_MEM_TO_DEV;
                 slave_config.dst_addr = dma_params->dma_addr;