usb: chipidea: fix nobody cared IRQ when booting with host role

If we connect Male-A-To-Male-A cable between otg-host and host pc,
the ci->vbus_active is set wrongly, and cause the controller run
at peripheral mode when we load gadget module (ci_udc_start will be run),
but the software runs at host mode due to id = 0. The ehci_irq
can't handle suspend (USBi_SLI) interrupt which is enabled for
peripheral mode, it causes no one will handle irq error.

This patch is needed for 3.12 stable

Cc: stable <stable@vger.kernel.org>
Acked-by: Michael Grzeschik <mgr@pengutronix.de>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 4 insertions, 3 deletions

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 5d8981c5235e..6e73f8cd60e5 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -642,6 +642,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
                         : CI_ROLE_GADGET;
         }
 
+        /* only update vbus status for peripheral */
+        if (ci->role == CI_ROLE_GADGET)
+                ci_handle_vbus_change(ci);
+
         ret = ci_role_start(ci, ci->role);
         if (ret) {
                 dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b34c81969cba..69d20fbb38a2 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1795,9 +1795,6 @@ static int udc_start(struct ci_hdrc *ci)
         pm_runtime_no_callbacks(&ci->gadget.dev);
         pm_runtime_enable(&ci->gadget.dev);
 
-        /* Update ci->vbus_active */
-        ci_handle_vbus_change(ci);
-
         return retval;
 
 destroy_eps: