atl1c: remove PHY contrl in atl1c_reset_pcie

atl1c_reset_phy follows atl1c_reset_pcie in the whole driver,
so, it's unnecessary to add PHY control code in atl1c_reset_pcie.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 2 insertions, 9 deletions

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 1f82880904df..f0f348bf6c16 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -165,11 +165,6 @@ static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag)
         atl1c_pcie_patch(hw);
         if (flag & ATL1C_PCIE_L0S_L1_DISABLE)
                 atl1c_disable_l0s_l1(hw);
-        if (flag & ATL1C_PCIE_PHY_RESET)
-                AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
-        else
-                AT_WRITE_REG(hw, REG_GPHY_CTRL,
-                        GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET);
 
         msleep(5);
 }
@@ -2409,8 +2404,7 @@ static int atl1c_resume(struct device *dev)
         struct atl1c_adapter *adapter = netdev_priv(netdev);
 
         AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
-        atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
-                        ATL1C_PCIE_PHY_RESET);
+        atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
 
         atl1c_phy_reset(&adapter->hw);
         atl1c_reset_mac(&adapter->hw);
@@ -2568,8 +2562,7 @@ static int __devinit atl1c_probe(struct pci_dev *pdev,
                 dev_err(&pdev->dev, "net device private data init failed\n");
                 goto err_sw_init;
         }
-        atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
-                        ATL1C_PCIE_PHY_RESET);
+        atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
 
         /* Init GPHY as early as possible due to power saving issue  */
         atl1c_phy_reset(&adapter->hw);