mfd/rtc: s5m: fix register updating by adding regmap for RTC

Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and
add new regmap for RTC.

On S5M8767A registers were not properly updated and read due to usage of
the same regmap as the PMIC.  This could be observed in various hangs,
e.g.  in infinite loop during waiting for UDR field change.

On this chip family the RTC has different I2C address than PMIC so
additional regmap is needed.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 22 insertions, 8 deletions

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 34c18fb8c089..54cc25546592 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -81,31 +81,31 @@ static struct of_device_id sec_dt_match[] = {
 
 int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
 {
-        return regmap_read(sec_pmic->regmap, reg, dest);
+        return regmap_read(sec_pmic->regmap_pmic, reg, dest);
 }
 EXPORT_SYMBOL_GPL(sec_reg_read);
 
 int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
 {
-        return regmap_bulk_read(sec_pmic->regmap, reg, buf, count);
+        return regmap_bulk_read(sec_pmic->regmap_pmic, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(sec_bulk_read);
 
 int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value)
 {
-        return regmap_write(sec_pmic->regmap, reg, value);
+        return regmap_write(sec_pmic->regmap_pmic, reg, value);
 }
 EXPORT_SYMBOL_GPL(sec_reg_write);
 
 int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
 {
-        return regmap_raw_write(sec_pmic->regmap, reg, buf, count);
+        return regmap_raw_write(sec_pmic->regmap_pmic, reg, buf, count);
 }
 EXPORT_SYMBOL_GPL(sec_bulk_write);
 
 int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask)
 {
-        return regmap_update_bits(sec_pmic->regmap, reg, mask, val);
+        return regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(sec_reg_update);
 
@@ -166,6 +166,11 @@ static struct regmap_config s5m8767_regmap_config = {
         .cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config sec_rtc_regmap_config = {
+        .reg_bits = 8,
+        .val_bits = 8,
+};
+
 #ifdef CONFIG_OF
 /*
  * Only the common platform data elements for s5m8767 are parsed here from the
@@ -266,9 +271,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
                 break;
         }
 
-        sec_pmic->regmap = devm_regmap_init_i2c(i2c, regmap);
-        if (IS_ERR(sec_pmic->regmap)) {
-                ret = PTR_ERR(sec_pmic->regmap);
+        sec_pmic->regmap_pmic = devm_regmap_init_i2c(i2c, regmap);
+        if (IS_ERR(sec_pmic->regmap_pmic)) {
+                ret = PTR_ERR(sec_pmic->regmap_pmic);
                 dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
                         ret);
                 return ret;
@@ -277,6 +282,15 @@ static int sec_pmic_probe(struct i2c_client *i2c,
         sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
         i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
 
+        sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc,
+                        &sec_rtc_regmap_config);
+        if (IS_ERR(sec_pmic->regmap_rtc)) {
+                ret = PTR_ERR(sec_pmic->regmap_rtc);
+                dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
+                        ret);
+                return ret;
+        }
+
         if (pdata && pdata->cfg_pmic_irq)
                 pdata->cfg_pmic_irq();