Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd

Pull MTD update from David Woodhouse:
 "Fairly unexciting MTD merge for 3.9:

   - misc clean-ups in the MTD command-line partitioning parser
     (cmdlinepart)
   - add flash locking support for STmicro chips serial flash chips, as
     well as for CFI command set 2 chips.
   - new driver for the ELM error correction HW module found in various
     TI chips, enable the OMAP NAND driver to use the ELM HW error
     correction
   - added number of new serial flash IDs
   - various fixes and improvements in the gpmi NAND driver
   - bcm47xx NAND driver improvements
   - make the mtdpart module actually removable"

* tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits)
  mtd: map: BUG() in non handled cases
  mtd: bcm47xxnflash: use pr_fmt for module prefix in messages
  mtd: davinci_nand: Use managed resources
  mtd: mtd_torturetest can cause stack overflows
  mtd: physmap_of: Convert device allocation to managed devm_kzalloc()
  mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement.
  mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional.
  mtd: atmel_nand: avoid to report an error when lookup table offset is 0.
  mtd: bcm47xxsflash: adjust names of bus-specific functions
  mtd: bcm47xxpart: improve probing of nvram partition
  mtd: bcm47xxpart: add support for other erase sizes
  mtd: bcm47xxnflash: register this as normal driver
  mtd: bcm47xxnflash: fix message
  mtd: bcm47xxsflash: register this as normal driver
  mtd: bcm47xxsflash: write number of written bytes
  mtd: gpmi: add sanity check for the ECC
  mtd: gpmi: set the Golois Field bit for mx6q's BCH
  mtd: devices: elm: Removes <xx> literals in elm DT node
  mtd: gpmi: fix a dereferencing freed memory error
  mtd: fix the wrong timeo for panic_nand_wait()
  ...

38 files changed, 1881 insertions, 331 deletions

diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
new file mode 100644
index 000000000000..8c1528c421d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/elm.txt
@@ -0,0 +1,16 @@
+Error location module
+
+Required properties:
+- compatible: Must be "ti,am33xx-elm"
+- reg: physical base address and size of the registers map.
+- interrupts: Interrupt number for the elm.
+
+Optional properties:
+- ti,hwmods: Name of the hwmod associated to the elm
+
+Example:
+elm: elm@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x48080000 0x2000>;
+        interrupts = <4>;
+};
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index dab7847fc800..61c5ec850f2f 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -26,6 +26,9 @@ file systems on embedded devices.
  - linux,mtd-name: allow to specify the mtd name for retro capability with
    physmap-flash drivers as boot loader pass the mtd partition via the old
    device name physmap-flash.
+ - use-advanced-sector-protection: boolean to enable support for the
+   advanced sector protection (Spansion: PPB - Persistent Protection
+   Bits) locking.
 
 For JEDEC compatible devices, the following additional properties
 are defined:
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 03f2eb5627ec..557bec599f4f 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -74,8 +74,8 @@ config MTD_REDBOOT_PARTS_READONLY
 endif # MTD_REDBOOT_PARTS
 
 config MTD_CMDLINE_PARTS
-        bool "Command line partition table parsing"
-        depends on MTD = "y"
+        tristate "Command line partition table parsing"
+        depends on MTD
         ---help---
           Allow generic configuration of the MTD partition tables via the kernel
           command line. Multiple flash resources are supported for hardware where
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 7c057a05adb6..ddc0a4287a4b 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -142,7 +142,13 @@ static int __init ar7_parser_init(void)
         return register_mtd_parser(&ar7_parser);
 }
 
+static void __exit ar7_parser_exit(void)
+{
+        deregister_mtd_parser(&ar7_parser);
+}
+
 module_init(ar7_parser_init);
+module_exit(ar7_parser_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(  "Felix Fietkau <nbd@openwrt.org>, "
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 6a1180502cc1..63feb75cc8e0 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -19,12 +19,6 @@
 /* 10 parts were found on sflash on Netgear WNDR4500 */
 #define BCM47XXPART_MAX_PARTS           12
 
-/*
- * Amount of bytes we read when analyzing each block of flash memory.
- * Set it big enough to allow detecting partition and reading important data.
- */
-#define BCM47XXPART_BYTES_TO_READ       0x404
-
 /* Magics */
 #define BOARD_DATA_MAGIC                0x5246504D      /* MPFR */
 #define POT_MAGIC1                      0x54544f50      /* POTT */
@@ -59,13 +53,21 @@ static int bcm47xxpart_parse(struct mtd_info *master,
         uint32_t *buf;
         size_t bytes_read;
         uint32_t offset;
-        uint32_t blocksize = 0x10000;
+        uint32_t blocksize = master->erasesize;
         struct trx_header *trx;
+        int trx_part = -1;
+        int last_trx_part = -1;
+        int max_bytes_to_read = 0x8004;
+
+        if (blocksize <= 0x10000)
+                blocksize = 0x10000;
+        if (blocksize == 0x20000)
+                max_bytes_to_read = 0x18004;
 
         /* Alloc */
         parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
                         GFP_KERNEL);
-        buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+        buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
 
         /* Parse block by block looking for magics */
         for (offset = 0; offset <= master->size - blocksize;
@@ -80,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
                 }
 
                 /* Read beginning of the block */
-                if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+                if (mtd_read(master, offset, max_bytes_to_read,
                              &bytes_read, (uint8_t *)buf) < 0) {
                         pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
                                offset);
@@ -95,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_info *master,
                 }
 
                 /* Standard NVRAM */
-                if (buf[0x000 / 4] == NVRAM_HEADER) {
+                if (buf[0x000 / 4] == NVRAM_HEADER ||
+                    buf[0x1000 / 4] == NVRAM_HEADER ||
+                    buf[0x8000 / 4] == NVRAM_HEADER ||
+                    (blocksize == 0x20000 && (
+                      buf[0x10000 / 4] == NVRAM_HEADER ||
+                      buf[0x11000 / 4] == NVRAM_HEADER ||
+                      buf[0x18000 / 4] == NVRAM_HEADER))) {
                         bcm47xxpart_add_part(&parts[curr_part++], "nvram",
                                              offset, 0);