diff options
author | Purna Chandra Mandal <purna.mandal@microchip.com> | 2016-04-01 07:18:49 -0400 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2016-04-04 13:04:23 -0400 |
commit | 120e8989ebac7c7c702e351046c20e9918912aca (patch) | |
tree | 537da358609f9040cb4c3fea60f2b8bd891cc754 | |
parent | f55532a0c0b8bb6148f4e07853b876ef73bc69ca (diff) |
spi: pic32: Add bindings for PIC32 SPI peripheral
Document the devicetree bindings for the SPI peripheral found
on Microchip PIC32 class devices.
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r-- | Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt new file mode 100644 index 000000000000..79de379f4dc0 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt | |||
@@ -0,0 +1,34 @@ | |||
1 | Microchip PIC32 SPI Master controller | ||
2 | |||
3 | Required properties: | ||
4 | - compatible: Should be "microchip,pic32mzda-spi". | ||
5 | - reg: Address and length of register space for the device. | ||
6 | - interrupts: Should contain all three spi interrupts in sequence | ||
7 | of <fault-irq>, <receive-irq>, <transmit-irq>. | ||
8 | - interrupt-names: Should be "fault", "rx", "tx" in order. | ||
9 | - clocks: Phandle of the clock generating SPI clock on the bus. | ||
10 | - clock-names: Should be "mck0". | ||
11 | - cs-gpios: Specifies the gpio pins to be used for chipselects. | ||
12 | See: Documentation/devicetree/bindings/spi/spi-bus.txt | ||
13 | |||
14 | Optional properties: | ||
15 | - dmas: Two or more DMA channel specifiers following the convention outlined | ||
16 | in Documentation/devicetree/bindings/dma/dma.txt | ||
17 | - dma-names: Names for the dma channels. There must be at least one channel | ||
18 | named "spi-tx" for transmit and named "spi-rx" for receive. | ||
19 | |||
20 | Example: | ||
21 | |||
22 | spi1: spi@1f821000 { | ||
23 | compatible = "microchip,pic32mzda-spi"; | ||
24 | reg = <0x1f821000 0x200>; | ||
25 | interrupts = <109 IRQ_TYPE_LEVEL_HIGH>, | ||
26 | <110 IRQ_TYPE_LEVEL_HIGH>, | ||
27 | <111 IRQ_TYPE_LEVEL_HIGH>; | ||
28 | interrupt-names = "fault", "rx", "tx"; | ||
29 | clocks = <&PBCLK2>; | ||
30 | clock-names = "mck0"; | ||
31 | cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; | ||
32 | dmas = <&dma 134>, <&dma 135>; | ||
33 | dma-names = "spi-rx", "spi-tx"; | ||
34 | }; | ||