# Note: tegra-install-kernel.sh does NOT use this, unlike
# {panda,odroid}-install-kernel.sh. hermanjl has yet to figure out how to mount
# the mmc drives which hold the tegra u-boot files so these values were manually
# entered in minicom and saved on the mmc using "saveenv". The script is stored
# here for safety.
baudrate=115200
board=cardhu
bootargs=console=ttyS0,115200n8 console=tty1 vmalloc=256M mem=2047M@2048M noinitrd usbcore.old_scheme_first=1 core_edp_mv=1300 panel=lvds tegraid=30.1.2.0.0 loglevel=7 debug_uartport=lsport,2 smp tegra_fbmem=3072K@0xBFE00000 max_cpu_cur_me
bootcmd=run usb_boot; run mmc1_boot; run mmc0_boot
bootdelay=3
bootdev_bootargs=root=/dev/sda1 rw rootwait gpt
bootfile=vmlinux.uimg
common_bootargs=console=ttyS0,115200n8 console=tty1 vmalloc=256M mem=2047M@2048M noinitrd
console=ttyS0,115200n8
emmc_root=/dev/mmcblk1p1
extra_bootargs=usbcore.old_scheme_first=1 core_edp_mv=1300 panel=lvds tegraid=30.1.2.0.0 loglevel=7 debug_uartport=lsport,2 smp tegra_fbmem=3072K@0xBFE00000 max_cpu_cur_ma=10000
fs_root=/dev/sda1
gdb_boot=setenv gdb kgdboc=ttyS0,115200 kgdbwait nokgdbroundup; setenv console /dev/null; run bootcmd
loadaddr=0x80408000
lp0_vec=0x00002000@0x9C406000
mmc0_boot=setenv mmcdev 0; run root_setup; run mmc_boot
mmc1_boot=setenv mmcdev 1; run root_setup; run mmc_boot
mmc_boot=run mmc_setup; mmc rescan ${mmcdev}; ext2load mmc ${mmcdev}:${pn} ${loadaddr} /boot/${bootfile}; bootm ${loadaddr}
mmc_setup=setenv bootdev_bootargs root=${fs_root} rw rootwait gpt; run regen_all
mmcdev=1
mmcname=mmcblk
netconsole=netconsole=44446@152.2.129.249/eth0,44446@152.2.142.84/00:21:9b:1b:85:7e
nfs_root=/dev/nfs ip=:::::eth0:dhcp
platform_extras=vmalloc=256M mem=2047M@2048M
pn=1
regen_all=setenv common_bootargs console=${console} console=tty1 ${platform_extras} ${dev_extras} noinitrd; setenv bootargs ${common_bootargs} ${extra_bootargs} ${bootdev_bootargs} ${netconsole} ${gdb}
root_setup=setenv emmc_root /dev/${mmcname}${mmcdev}p${pn};setenv nfs_root /dev/nfs ip=:::::eth0:dhcp; setenv sata_root /dev/sda1; setenv fs_root ${sata_root}
sata_root=/dev/sda1
serial#=1
stderr=serial,lcd
stdin=serial,tegra-kbc
stdout=serial,lcd
usb_boot=usb start; run usb_setup; ext2load usb 0:${pn} ${loadaddr} /boot/${bootfile}; bootm ${loadaddr}
usb_setup=setenv bootdev_bootargs root=/dev/${usbname}${pn} rw rootwait; run regen_all
usbname=sda
user=user
videospec=tegrafb