| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
once gpu is powered off i.e. power_on set to false, nvgpu isr
does not handle stall/nonstall irq. Depending upon state
of gpu, this can result in either of following errors:
1) irq 458: nobody cared (try booting with the "irqpoll" option)
2) "HSM ERROR 42, GPU" from SCE if it detects that an interrupt is
not in time.
Fix these by masking all interrupts just before gpu power off
as nvgpu won't be handling any irq anymore.
While masking interrupts, if there are any pending interrupts,
then report those with a log message.
Bug 1987855
Bug 200424832
Change-Id: I95b087f5c24d439e5da26c6e4fff74d8a525f291
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1770802
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- create common file common/ecc.c which include common functions for add
ecc counters and remove counters.
- common code will create a list of all counter which make it easier to
iterate all counters.
- Add chip specific file for adding ecc counters.
- add linux specific file os/linux/ecc_sysfs.c to export counters to
sysfs.
- remove obsolete code
- MISRA violation for using snprintf is not solved, tracking with
jira NVGPU-859
Jira NVGPUT-115
Change-Id: I1905c43c5c9b2b131199807533dee8e63ddc12f4
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1763536
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Moved gv11b_detect_ecc_enabled_units function
from gv11b.c to gr_gv11b.c, as this is being
used only in gr_gv11b file.
In order to avoid GR code touching fuse registers,
as it need to include fuse HW headers in GR code,
introduced two fuse HALs which are being called
from GR code. is_opt_ecc_enable for checking
whether ecc enable bit is set in fuse register
and is_opt_feature_overide_disable for checking
whether feature override disable bit is set in
fuse register.
Initialized fuse HAL functions for chips that
make use of those HAL functions.
JIRA NVGPU-615
Change-Id: Iafe5a3940bb19cb3da51e270403450b63c2f67a3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1775564
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move all FB HAL implementations to common/fb.
JIRA NVGPU-596
Change-Id: Id4ea09d608f5d6d1b245bddac09ecf1444b8ab30
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1769724
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In gr_gk20a_find_priv_offset_in_buffer() we right now calculate
offset of a register in gpccs segment based on register address type
Separate out sequence to find offset in gpccs segment and move it to new API
gr_gk20a_get_offset_in_gpccs_segment()
Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API
to this HAL
Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct
API
Jira NVGPUT-118
Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761669
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement BAR2 bind as a bus HAL and remove the corresponding MM HAL.
BAR2 bind HW API is in bus.
JIRA NVGPU-588
Change-Id: I3a8391b00f1ba65f9ed28b633f1d52bf7c984230
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730896
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All chips should use the waiting version of BAR1 bind since gm20b.
Change gp10b and gp106 to do that. BAR1 is not used in Volta.
JIRa NVGPU-588
Change-Id: Ib6957ebea4effa7c64f4d71522447fa6245728ed
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730895
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Code touching timer registers was combined with bus code. They're two
logically separate register spaces, so separate the code accordingly.
JIRA NVGPU-588
Change-Id: I40e2925ff156669f41ddc1f2e7714f92a2da367b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730893
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move setting of BAR0_WINDOW to bus HAL. Also moves the usage of spinlock to
common code so that pramin_gk20a.[ch] can be deleted.
JIRA NVGPU-588
Change-Id: I3ceabc56016711b2c93f31fedf07daa778a4873a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730890
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Registers to set priv interrupts are in priv_ring, but the code was
in bus HAL. Move the code and related HALs to priv_ring instead.
JIRA NVGPU-588
Change-Id: I708d11f77405dbba86586a0d1da42f65bcc1de9d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730889
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Removed the reference for $NVGPU/drivers/gpu/nvgpu/common
from Makefile and fixed the include path for the
clockgating headers in HAL files.
Change-Id: I34c179866d28c932501b38184ec18d20dce81480
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1730759
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of bus HAL to common/bus.
Change-Id: Ia89350f9d94f3ccfd5500a340e6a677cd7d4cfaa
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1726337
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of the MISRA fixes, moving all the
gating_reglist files to common/clock_gating dir,
the new directory structure suggested to follow.
Removed unused gating_reglist files for gk20a
JIRA NVGPU-646
Change-Id: I388855befcf991ee68eeffed10fe9ac456210649
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1722330
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vgpu needs to call nvgpu_init_ltc_support to floor sweep and
set ltc_count.
And set gops.ltc.set_enabled to null as guest is not allowed to change
ltc settings.
Jira VQRM-2345
Change-Id: I83517d631aa947db4a0a4c312f0cecda9ba03973
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1703626
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add below new HALs
gops.fifo.add_sema_cmd() to insert HOST semaphore acquire/release methods
gops.fifo.get_sema_wait_cmd_size() to get size of acquire command buffer
gops.fifo.get_sema_incr_cmd_size() to get size of release command buffer
Separate out new API gk20a_fifo_add_sema_cmd() to implement semaphore acquire/
release sequence and set it to gops.fifo.add_sema_cmd()
Add gk20a_fifo_get_sema_wait_cmd_size() and gk20a_fifo_get_sema_incr_cmd_size()
to return respective command buffer sizes
Jira NVGPUT-16
Change-Id: Ia81a50921a6a56ebc237f2f90b137268aaa2d749
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704490
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
NVGPU_DBG_GPU_IOCTL_PC_SAMPLING ioctl is not handled properly for HV
case for both Linux and QNX. Currently guest vm is trying to perform
gpu memory read and write operations which supposed to be done by RM
server, causing the crash. This patch is supposed to fix ioctl failure.
Bug 2052040
Change-Id: Ia0773959b84739a1bced858331764751520a3561
Signed-off-by: Prateek Sethi <prsethi@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1708102
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sourab Gupta <sourabg@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Sourab Gupta <sourabg@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Switch all logging to nvgpu_log*(). gk20a_dbg* macros are
intentionally left there because of use from other repositories.
Because the new functions do not work without a pointer to struct
gk20a, and piping it just for logging is excessive, some log messages
are deleted.
Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704148
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add new HAL gops.mc.isr_nonstall() to handle nonstall interrupts
We already handle nonstall interrupts in nvgpu_intr_nonstall()
But this API is completely in linux specific code
Separate out os-independent code to handle nonstall interrupts in new API
mc_gk20a_isr_nonstall() and set it to HAL gops.mc.isr_nonstall() for all
existing chips
Call this HAL from nvgpu_intr_nonstall()
Jira NVGPUT-8
Change-Id: Iec6a56db03158a72a256f7eee8989a0a8a42ae2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1706589
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mmu fault information for client and gpc differ
on various chip. Add separate table for each chip
based on that change and add hal functions to access
those descriptors.
bug 2050564
Change-Id: If15a4757762569d60d4ce1a6a47b8c9a93c11cb0
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1704105
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add below two new HALs
gops.fifo.runlist_hw_submit() to submit a new runlist to hardware
gops.fifo.runlist_wait_pending() to wait until runlist write is successful
Set existing API gk20a_fifo_runlist_wait_pending() to
gops.fifo.runlist_wait_pending HAL
Add new API gk20a_fifo_runlist_hw_submit() which submits the runlist to h/w
and set it to gops.fifo.runlist_hw_submit HAL
Jira NVGPUT-20
Change-Id: Ic23f7d947e30883aca0b536de818e79e14733195
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1700548
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add new HAL gops.bus.set_ppriv_timeout_settings() to set platform specific
ppriv timeouts
Set this HAL for all supported GPUs for now
Jira NVGPUT-35
Change-Id: I88b438a7bf381d0216e0947a16cd267461d0e8d7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1699314
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs
and just calculate the unicast list assuming all FBPAs are present
This generates incorrect list of unicast addresses
Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr
Set gr_gv100_get_active_fpba_mask() for GV100
Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips
gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate
unicast list only for active FBPAs
Bug 200398811
Jira NVGPU-556
Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1694444
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and
NV_PMM_FBP_STRIDE which are incorrect for Volta
Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip
Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips
Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta
Use HAL instead of hard coded values wherever required
Bug 200398811
Jira NVGPU-556
Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have new broadcast registers on Volta, and we need to generate correct
unicast addresses for them so that we can write those registers to context image
Add new GR HAL create_priv_addr_table() to do this conversion
Set gr_gk20a_create_priv_addr_table() for older chips
Set gr_gv11b_create_priv_addr_table() for Volta
gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate
appriate list of unicast register for each broadcast register
Bug 200398811
Jira NVGPU-556
Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690027
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With Volta we have more number of broadcast registers than previous chips
and we don't decode them right now in gr_gk20a_decode_priv_addr()
Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all
previous chips
Add and use gr_gv11b_decode_priv_addr() for Volta
gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set
the broadcast flags apporiately
Define below new broadcast types
PRI_BROADCAST_FLAGS_PMMGPC
PRI_BROADCAST_FLAGS_PMM_GPCS
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA
PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB
PRI_BROADCAST_FLAGS_PMMFBP
PRI_BROADCAST_FLAGS_PMM_FBPS
PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC
PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP
Bug 200398811
Jira NVGPU-556
Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1690026
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Declare global functions before reaching the implementation.
- avoid using current (current process).
- assign ch->pid/tgid before using them.
Jira VFND-4870
Change-Id: I688a1b89ef4d5dcf046929eab11d7e523caba0a5
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1687142
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only populate the create_gr_sysfs() functions when the system actually
has SYSFS (i.e is compiling for the Linux kernel). This allows non-
Linux systems to compile.
JIRA NVGPU-525
Change-Id: I3bac34feff376d89c0b63259772c77f7b4a03adc
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1673824
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bar1/userd setup is different for RM server. created common function
gk20a_init_fifo_setup_sw_common.
Jira VQRM-3058
Change-Id: I655b54e21ed5f15dcb8e7b01bd9cd129b35ae7a3
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1665691
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
RM Server overrides it for handling stall interrupts.
Jira VQRM-3058
Change-Id: I8b14f073e952d19c808cb693958626b8d8aee8ca
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1679709
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
RM Server acts differently for channel suspend/resume.
Jira VQRM-3058
Change-Id: If41e3099164654db448d1157fd7f51dd00c5e201
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1679707
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RM Server acts differently for ctxsw timeout check. It won't check
GP_GET or accumulated timeouts, but notify guest and go to recovery.
Jira VQRM-3058
Change-Id: I428aea34dc517311eb7e73feb556145e916309fb
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1679706
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Channel abort clean up is only needed by native and vgpu driver but not
RM server. RM server expects guest will clean up itself. RM server
should not set the callback.
Jira VQRM-3058
Change-Id: I11b49b6f2d51c871e31de16955d487dca82609cb
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1679705
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in
ctxsw buffer to be 256 byte aligned but same change is not applied to other
chip ucodes
ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and
define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other
chips except GV100
Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix
the required alignment in this function
Bug 1998067
Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676655
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For LIST_nv_pm_fbpa_ctx_regs, we right now call
add_ctxsw_buffer_map_entries_subunits() to add registers corresponding
to all the FBPAs
But while configuring total number of registers, we do not consider
floorswept FBPAs and that causes misalignment in subsequent lists for GV100
Fix this by reading disabled/floorswept FBPAs from fuse and consider only those
FBPAs which are active for GV100
Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a
common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100
Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned
implementation to consider floorsweeping
Bug 1998067
Change-Id: Id560551bb0b8142791c117b6d27864566c90b489
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1676654
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add __nvgpu_sgl_phys function that can be used to implement IPA
to PA translation in a subsequent change.
Adapt existing function prototypes to add pointer to gpu context,
as we will need to check if IPA to PA translation is needed.
JIRA EVLR-2442
Bug 200392719
Change-Id: I5a734c958c8277d1bf673c020dafb31263f142d6
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1673142
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create hal to indicate syncpt increments per release.
Legacy chip uses 2 syncpt increments per release and gv1xx
onwards uses 1 syncpt increment per release.
Bug 2066025
Change-Id: I5d6d0a5368ef561f8150fbb7120181f49f6e338b
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1669817
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vserver handles semaphore differently from native, so it needs a
callback to differentiate from native. Also created common function
mc_gk20a_handle_intr_nonstall to handle all nonstall interrupts.
Jira VQRM-2982
Change-Id: I1b3821717a4005ca4bf2a4dac5dcd335872f48f1
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1656753
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
RM Server will need to set specific HAL op and notify vgpu client.
Jira VQRM-2982
Change-Id: I679565831635ff3fadf0bdc1af5fd7a8679b6fdd
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1660226
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The vserver variant for gr post event id needs different
functionality to send interrupt to VM. Add HAL operation
to allow overriding vserver usecase.
Jira VQRM-2982
Change-Id: I915d089ef751023968c1e8ab181c21afeec997a5
Signed-off-by: Aparna Das <aparnad@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1658382
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The operations in struct nvgpu_sgt_ops have a scatter-gather list (sgl)
argument which is a void pointer. Change the type signatures to take
struct nvgpu_sgl * which is an opaque marker type that makes it more
difficult to pass around wrong arguments, as anything goes for void *.
Explicit types add also self-documentation to the code.
For some added safety, some explicit type casts are now required in
implementors of the nvgpu_sgt_ops interface when converting between the
general nvgpu_sgl type and implementation-specific types. This is not
purely a bad thing because the casts explain clearly where type
conversions are happening.
Jira NVGPU-30
Jira NVGPU-52
Jira NVGPU-305
Change-Id: Ic64eed6d2d39ca5786e62b172ddb7133af16817a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1643555
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most of files have been moved out of linux folder. More code could be
common as halifying going on.
Jira EVLR-2364
Change-Id: Ia9dbdbc82f45ceefe5c788eac7517000cd455d5e
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1649947
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Most of VGPU code is linux specific but lies in common code
So until VGPU code is properly abstracted and made os-independent,
move all of VGPU code to linux specific directory
Handle corresponding Makefile changes
Update all #includes to reflect new paths
Add GPL license to newly added linux files
Jira NVGPU-387
Change-Id: Ic133e4c80e570bcc273f0dacf45283fefd678923
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1599472
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove #include of <uapi/linux/nvgpu.h> from gr_gk20a.h.
vgpu_mm_gp10b.c uses UAPI definitions, so add an explicit #include
there.
JIRA NVGPU-363
Change-Id: Ieabd7240d62495d2719d7fdbc25cc238de13c75e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598981
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It'll make the code be able to apply to gv11b too.
Jira EVLR-1671
Change-Id: I9a960fd1aaa9adc6bb39aa2c730049e75006fea7
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1597379
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TSG/CHANNEL_SET_PRIORITY IOCTLs are deprecated and user space should be using
combination of timeslice and interleave levels to decide the priority
Hence remove the IOCTLs and all corresponding APIs
Jira NVGPU-393
Change-Id: I7cf0785689269536eca0c278c774b0e9e74f8c2f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1598581
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We use linux specific graphics/compute preemption modes defined in uapi header
(and of below form) in all over common code
NVGPU_GRAPHICS_PREEMPTION_MODE_*
NVGPU_COMPUTE_PREEMPTION_MODE_*
Since common code should be independent of linux specific code, define new modes
of the form in common code and used them everywhere
NVGPU_PREEMPTION_MODE_GRAPHICS_*
NVGPU_PREEMPTION_MODE_COMPUTE_*
Add required parser functions to convert both the modes into each other
For linux IOCTL NVGPU_IOCTL_CHANNEL_SET_PREEMPTION_MODE, we need to convert
linux specific modes into common modes first before passing them to common code
And to pass gpu characteristics to user space we need to first convert common
modes into linux specific modes and then pass them to user space
Jira NVGPU-392
Change-Id: I8c62c6859bdc1baa5b44eb31c7020e42d2462c8c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1596930
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GPU class ids were moved to get_litter_value API, but vgpu was not
updated to remove assigning them in HAL initialization. Remove the
duplicate assignments.
JIRA NVGPU-388
Change-Id: I65cf8f9cfcfc372c1c3b0d9239e55f19c9a02f46
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1596247
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In gr_gp10b_alloc_gr_ctx(), we use linux specific flags NVGPU_ALLOC_OBJ_FLAGS_*
Since common code should be independent of linux specific code, define new flags
NVGPU_OBJ_CTX_FLAGS_SUPPORT_* in common code and use them wherever needed
Linux code will parse the user flags and send appropriate flags to
g->ops.gr.alloc_obj_ctx()
Also remove use of NVGPU_ALLOC_OBJ_FLAGS_LOCKBOOST_ZERO since this seems to be
deadcode anyways
Jira NVGPU-382
Change-Id: Id82efe0d46ddc3e2c063610025ea57f283bc3510
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1594452
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|