| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PMU counters #0 and #4 are used to count total cycles and busy cycles.
These counts are used by podgov to estimate GPU load.
PMU idle intr status register is used to monitor overflow. Overflow
rarely occurs because frequency governor reads and resets the counters
at a high cadence. When overflow occurs, 100% work load is reported to
frequency governor.
Bug 1963732
Change-Id: I046480ebde162e6eda24577932b96cfd91b77c69
Signed-off-by: Peng Liu <pengliu@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1939547
(cherry picked from commit 34df0035194e0203f68f679acdd84e5533a48149)
Reviewed-on: https://git-master.nvidia.com/r/1979495
Reviewed-by: Aaron Tian <atian@nvidia.com>
Tested-by: Aaron Tian <atian@nvidia.com>
Reviewed-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Tested-by: Rajkumar Kasirajan <rkasirajan@nvidia.com>
Reviewed-by: Bibek Basu <bbasu@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gops.fb.dump_vpr_wpr_info() accesses both VPR and WPR registers.
Split this into two different HALs gops.fb.dump_vpr_info() and
gops.fb.dump_wpr_info()
Also unset HALs accessing VPR registers on dGPUs
We don't support VPR on dGPUs
Remove fb_mmu_vpr_info_r() register and all its accessors from
dGPU headers
Bug 2173122
Change-Id: I5b2712f8c5389e422a84c375a7e836add48bfd1c
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850947
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't support big page size beginning Pascal, so set HAL
gops.fb.set_mmu_page_size() to NULL on all those platforms
Also remove these accessors from corresponding platforms
fb_mmu_ctrl_use_pdb_big_page_size_v()
fb_mmu_ctrl_use_pdb_big_page_size_true_f()
fb_mmu_ctrl_use_pdb_big_page_size_false_f()
Bug 2173122
Change-Id: I7353412860a7a6f8a993ca9184a0dc3ca9d749af
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1850946
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
FB reset is done by accessing MC register. Move the code to MC unit.
JIRA NVGPU-954
Change-Id: I1636887af805f016da5490af65e808f9ac015cde
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1823385
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add API for querying reset mask corresponding to a unit. The reset
masks need to be read from MC HW header, and we do not want all
units to access Mc HW headers themselves.
JIRA NVGPU-954
Change-Id: I49ebbd891569de634bfc71afcecc8cd2358805c0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1823384
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
No one is checking return values for the *get_litter_value()
functions in the 100s of references, and some of the *get_litter_value()
functions were already doing a BUG(), we'll just call BUG() in all them.
And since we don't return in the error case, and there's no guarantee
that an errno won't collide with the litter values, we'll just
initialize the local ret value to 0 to avoid problems and confusion.
JIRA NVGPU-647
Change-Id: Id974c904a142c4b3abf1ab940121c270208b0b83
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1830582
GVS: Gerrit_Virtual_Submit
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All callers for the *get_litter_value() functions were expecting u32,
but the functions were declared to return int's. This is a violation of
MISRA 10.3 which prohibits implicit assignment between essential types
(signed int and unsigned long int, in this case). The litter values
are all u32's anyway.
JIRA NVGPU-647
Change-Id: I853d2abee372488e5d12e355050cbeaf1e53a42c
Signed-off-by: Philip Elcan <pelcan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1830581
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Scott Long <scottl@nvidia.com>
Reviewed-by: Alex Waterman <alexw@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
change the path of gk20a.h to <nvgpu/gk20a.h> for files in the
following directories.
gp106/
gv100/
Jira NVGPU-597
Change-Id: I098c12c34cdce764e6fca4ea1d16c5f8dee81026
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1836707
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In gk20a_ctrl_ioctl_gpu_characteristics() we right now just calculate
GPC mask in s/w and return to user space
But this could give incorrect result as any GPC could be floorswept
in h/w
Add gops.fuse.fuse_status_opt_gpc() to read GPC floorsweep status
from fuse
Add gops.gr.get_gpc_mask() to get actual GPC mask from h/w
Set these HALs only for dGPUs right now. Fuse register to read GPC
mask is not yet supported in simulation and hence simulation boot fails
These HALs will be set for iGPU once simulation issue is resolved
Use gops.gr.get_gpc_mask() if it is defined in
gk20a_ctrl_ioctl_gpu_characteristics() to send the actual GPC mask
to user space
Jira NVGPUT-132
Change-Id: I3b552de07883328fcfa41d4334ec0d777e04bdd3
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1822811
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Moved PMU RTOS init & start RTOS from acr_gm20b.c file pmu.c
method nvgpu_init_pmu_support()
-Modified nvgpu_init_pmu_support() to init required interface
for PMU RTOS & does start PMU RTOS in secure & non-secure
based on NVGPU_SEC_PRIVSECURITY flag.
-Created secured_pmu_start ops under PMU ops to start PMU
falcon in low secure mode.
-Updated PMU ops update_lspmu_cmdline_args, setup_apertures &
secured_pmu_start assignment for gp106 & gv100 to support
modified PMU init sequence.
-Removed duplicate PMU non-secure bootstrap code from multiple
files & defined gm20b_ns_pmu_setup_hw_and_bootstrap()method
to handle non secure PMU bootstrap, reused this method
for need chips.
JIRA NVGPU-1146
Change-Id: I3957da2936b3c4ea0c985e67802c847c38de7c89
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1818099
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Created struct nvgpu_acr to hold acr module related member
within single struct which are currently spread across multiple structs
like nvgpu_pmu, pmu_ops & gk20a.
-Created struct hs_flcn_bl struct to hold ACR HS bootloader specific members
-Created struct hs_acr to hold ACR ucode specific members like bootloader data
using struct hs_flcn_bl, acr type & falcon info on which ACR ucode need to run.
-Created acr ops under struct nvgpu_acr to perform ACR specific operation,
currently ACR ops were part PMU which caused to have always dependence
on PMU even though ACR was not executing on PMU.
-Added acr_remove_support ops which will be called as part of
gk20a_remove_support() method, earlier acr cleanup was part of
pmu remove_support method.
-Created define for ACR types,
-Ops acr_sw_init() function helps to set ACR properties
statically for chip currently in execution & assign ops to point to
needed functions as per chip.
-Ops acr_sw_init execute at early as nvgpu_init_mm_support calls acr
function to alloc blob space.
-Created ops to fill bootloader descriptor & to patch WPR info to ACR uocde
based on interfaces used to bootstrap ACR ucode.
-Created function gm20b_bootstrap_hs_acr() function which is now common
HAL for all chips to bootstrap ACR, earlier had 3 different function for
gm20b/gp10b, gv11b & for all dgpu based on interface needed.
-Removed duplicate code for falcon engine wherever common falcon code can be used.
-Removed ACR code dependent on PMU & made changes to use from nvgpu_acr.
JIRA NVGPU-1148
Change-Id: I39951d2fc9a0bb7ee6057e0fa06da78045d47590
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813231
GVS: Gerrit_Virtual_Submit
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Removed ACR support code from PMU module
- Deleted ACR related ops from pmu ops
- Deleted assigning of ACR related ops
using pmu ops during HAL init
-Removed code related to ACR bootstrap &
dependent code for all chips.
JIRA NVGPU-1147
Change-Id: I47a851a6b67a9aacde863685537c34566f97dc8d
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817990
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit c5810a670d367ae1dc405fcc3108e11265df34bb.
Bug 2400508
Jira VQRM-4806
Bug 200447406
Bug 2331747
Change-Id: Ie2a2c21f9285ff0349c7033fae24766a7117b462
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1837223
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
added hal layer for SM exception mask handling for
taking care of vitualization case.
Jira VQRM-4806
Bug 200447406
Bug 2331747
Change-Id: Ia44778a2e41c1a508c48026b8dee285966f1a544
Signed-off-by: aalex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1816284
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CTRL_CLK_LUT_NUM_ENTRIES to 128
And fix build issues that appeared with 128 entries.
Bug 2331655
Change-Id: If116bff14be9a1923e075f783fdb9a2e992208b8
Signed-off-by: Vaikundanathan S <vaikuns@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1810493
Reviewed-on: https://git-master.nvidia.com/r/1813861
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In case of VFE update, schedule work to set P0 clocks.
Added function nvgpu_clk_set_fll_clk_gv10x to update P0 clocks on perf event.
Fixed MISRA issues caused by this excluding external functions and MACROs
Bug 2331655
Change-Id: Id96c473092ee7f0b651413aefdd4b6f2f59e0b12
Signed-off-by: Vaikundanathan S <vaikuns@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1808014
Reviewed-on: https://git-master.nvidia.com/r/1813881
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch constructs clk_arbiter specific code for gp10b as well as
gv11b and does the necessary plumbing in the clk_arbiter code. The
changes made are as follows.
1) Constructed clk_arb_gp10b.* files which add support for clk_arb
related HALS including the nvgpu_clk_arb_init and nvgpu_clk_arb_cb.
This doesn't have support for debugfs nor the VFUpdateEvent yet and
consequently no support for arb->notifications.
2) Added gpcclk specific variables corresponding to every gpc2clk in
a given clk_arb related struct.
3) Linux specific support_clk_freq_controller is assigned true in
platform_gp10b.c and platform_gv11b.c files.
4) Incremented the clk_arb_worker.put atomic variable during
worker_deinit so as to allow the worker thread to be stopped.
5) Added the flag clk_arb_events_supported as part of struct
nvgpu_clk_arb. This flag is used to selectively account for the extra
refcounting present in OS specific code i.e.
nvgpu_clk_arb_commit_request_fd. For igpus, the extra refcount is
reduced during nvgpu_clk_arb_release_completion_dev.
Bug 2061372
Change-Id: Id00acb106db2b46e55aa0324034a16a73723c078
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774281
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the API as it has no use cases.
Bug 200445906
Change-Id: Ia2803bd05d78853963011a67091b34ba5bdb3732
Signed-off-by: Anup Mahindre <amahindre@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1817629
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of MC HAL to common/mc. Also bump gk20a
implementation to gm20b.
gk20a_mc_boot_0 was used via a HAL, but we have only one possible
implementation. It also has to be anyway called directly to detect
which HALs to assign, so make it a true common function.
mc_gk20a_handle_intr_nonstall was also used only in os/linux/intr.c
so move it there.
JIRA NVGPU-954
Change-Id: I79aedc9158f90d578db0edc17b714617b52690ac
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813519
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Vidmem size query was in mm_xxx.c. It involves reading a register from
FB, so move the query to FB HAL.
JIRA NVGPU-1063
Change-Id: I30dfd2c4fdcdd6c841f85aaab7431d52473759bd
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1801425
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Below regops HALs are not being called from anywhere, so remove them
gops.regops.get_runcontrol_whitelist_ranges()
gops.regops.get_runcontrol_whitelist_ranges_count()
gops.regops.get_qctl_whitelist_ranges()
gops.regops.get_qctl_whitelist_ranges_count()
HAL gops.regops.apply_smpc_war() is unimplemented for all the chips, and it
was originally only needed for gk20a which is not unsupported
So remove this HAL and its call too
Jira NVGPU-620
Change-Id: Ia2c74883cd647a2e94ee740ffd040a40c442b939
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1813106
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
channel_gk20a is clear from chip specifics and from most dependencies,
so move it under the common directory.
Jira NVGPU-967
Change-Id: I41f2160b96d4ec84064288ecc22bb360e82352df
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1810578
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move debugfs related code of therm from common driver to linux
specific part of the driver. gp106_therm_debugfs_init()
is updated to use nvgpu_os_linux_ops.
This also affects gv100 as gp106_therm_debugfs_init is used
for gv100 as well.
JIRA NVGPU-603
Change-Id: Ia293d14599bc0c91fd1e917b5a430bd8f3d96e56
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797906
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move linux dependencies and CONFIG_DEBUG_FS to linux specific
code from common driver for gp106 clk debugfs. There is no
code change in functions moved from gp106/clk_gp106.c.
It uses nvgpu_os_linux_ops to add gp106 specific clk debugfs
ops. The linux specific part of nvgpu driver uses this op
to initialize gp106 clk debugfs.
As gv100 also uses gp106 clk debugfs ops, set up os ops for
gv100.
JIRA NVGPU-603
Change-Id: Ib55ef051b13366e5907e1d05376bb18bf42c8653
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797904
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
Move all code from fb_gk20a.c to fb_gm20b.c.
Change-Id: I87fbdfee76599e019564d66bf248aaffcf978498
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1801422
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
HUB and GPC MMU debug modes were set in the same function. This
introduced a dependency from FB code to GR registers. Split setting
of GPC MMU debug mode to GR HAL.
Change-Id: I003446f9dfa147f526bd01d3b6130f4037d9b183
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1801420
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, clock arbiter code is extensively using dgpu specific
implementation. This patch restructures the clk_arbiter code and moves
gp106 specific code into HAL. Following changes are made in this patch
1) clk_domain_get_f_points is now invoked via HAL for gp106 i.e.
g->ops.clk.clk_domain_get_f_points.
2) moved nvgpu_clk_arb_change_vf_point and other related static
functions to clk_arb_gp106.c.
3) Instead of only checking if get_arbiter_clk_domain is empty, a
check for support_clk_freq_controller is also added. This is to enable
the clk_arbiter based on support from both the OS and the chips.
Bug 2061372
Change-Id: I65b0a4e02145a86fbbfb420ed591b1fa3c86f6dc
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1774279
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Debug fused chips do not have production signature. Use debug
signature for memory unlock binary. Requires also exporting a HAL
for checking debug mode from PMU.
Bug 200445202
Change-Id: I7f88ed6db2fe1c614fe9d4074dbf974c3817f453
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1809225
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In nvgpu repository, we have multiple accesses to methods in
pmu_gk20a.h which have register accesses. Instead of directly invoking
these methods, these are now called via HALs. Some common methods such
as pmu_wait_message_cond which donot have any register accesses
are moved to pmu_ipc.c and the method declarations are moved
to pmu.h. Also, changed gm20b_pmu_dbg to
nvgpu_dbg_pmu all across the code base. This would remove all
indirect dependencies via gk20a.h into pmu_gk20a.h. As a result
pmu_gk20a.h is now removed from gk20a.h
JIRA-597
Change-Id: Id54b2684ca39362fda7626238c3116cd49e92080
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1804283
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MISRA Rule-15.6 requires that all if-else blocks be enclosed in braces,
including single statement blocks. Fix errors due to single statement
if blocks without braces, introducing the braces.
JIRA NVGPU-671
Change-Id: I8493274995ed8de526902dd0ca0808b2972e28aa
Signed-off-by: Srirangan <smadhavan@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1796806
Reviewed-by: svc-misra-checker <svc-misra-checker@nvidia.com>
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of fuse HAL to common/fuse. Also implements new
fuse query functions for FBIO, FBP, TPC floorsweeping and security
fuses.
JIRA NVGPU-957
Change-Id: I55e256a4f1b59d50a721d4942907f70dc57467c4
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797177
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Deprecate NVGPU_GPU_IOCTL_INVAL_ICACHE as it is unused and has
a broken implementation.
Bug 200439908
Change-Id: Iab6f08cf3dd4853ba6c95cbc8443331bf505e514
Signed-off-by: Anup Mahindre <amahindre@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1800797
GVS: Gerrit_Virtual_Submit
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of ltc HAL to common/ltc.
JIRA NVGPU-956
Change-Id: Id78d74e8612d7dacfb8d322d491abecd798e42b5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1798461
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of therm HAL to common/therm. ELCG and BLCG
code was embedded in gr HAL, so moved that code to therm.
Bump gk20a code to gm20b.
JIRA NVGPU-955
Change-Id: I9b03e52f2832d3a1d89071a577e8ce106aaf603b
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1795989
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of priv_ring HAL to common/priv_ring. Implement
two new HAL APIs to remove illegal dependencies: enable_priv_ring and
enum_ltc.
As enum_ltc can be implemented only gm20b onwards, bump gk20a
implementation to base on gm20b.
JIRA NVGPU-964
Change-Id: I160c2216132aadbcd98bb4a688aeeb2c520a9bc0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1797025
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We right now define HAL exec_reg_ops() under gops.dbg_session_ops operations
But we have separate gops.regops operations for all the regops and this would
be logically correct place for exec_reg_ops()
Move exec_reg_ops() from gops.dbg_session_ops to gops.regops
Also rename it to exec_regops()
Jira NVGPU-620
Change-Id: If4f70639ffbc892c605f7540a83bce12ed821b52
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1794999
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move implementation of xve HAL to common/xve.
JIRA NVGPU-959
Change-Id: I27dba43253e3aa8fd11229a9c4fad97aa5cf0b59
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1796147
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
clk_arb.h and gk20a.h has circular dependencies to each other. This is
removed by forward declaring struct gk20a in clk_arb.h and removing the
header gk20a.h from clk_arb.h and similarly forward declaring struct
nvgpu_clk_arb in gk20a.h and removing the header clk_arb.h from gk20a.h
alongwith putting headers in every execution unit which calls clk_arb.h
related methods.
JIRA NVGPU-597
Change-Id: I7cedca17206c148b21d93e5d7f0d88c2f98b979a
Signed-off-by: Debarshi Dutta <ddutta@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1790915
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
once gpu is powered off i.e. power_on set to false, nvgpu isr
does not handle stall/nonstall irq. Depending upon state
of gpu, this can result in either of following errors:
1) irq 458: nobody cared (try booting with the "irqpoll" option)
2) "HSM ERROR 42, GPU" from SCE if it detects that an interrupt is
not in time.
Fix these by masking all interrupts just before gpu power off
as nvgpu won't be handling any irq anymore.
While masking interrupts, if there are any pending interrupts,
then report those with a log message.
Bug 1987855
Bug 200424832
Change-Id: I95b087f5c24d439e5da26c6e4fff74d8a525f291
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1770802
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- create common file common/ecc.c which include common functions for add
ecc counters and remove counters.
- common code will create a list of all counter which make it easier to
iterate all counters.
- Add chip specific file for adding ecc counters.
- add linux specific file os/linux/ecc_sysfs.c to export counters to
sysfs.
- remove obsolete code
- MISRA violation for using snprintf is not solved, tracking with
jira NVGPU-859
Jira NVGPUT-115
Change-Id: I1905c43c5c9b2b131199807533dee8e63ddc12f4
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1763536
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Moved gv11b_detect_ecc_enabled_units function
from gv11b.c to gr_gv11b.c, as this is being
used only in gr_gv11b file.
In order to avoid GR code touching fuse registers,
as it need to include fuse HW headers in GR code,
introduced two fuse HALs which are being called
from GR code. is_opt_ecc_enable for checking
whether ecc enable bit is set in fuse register
and is_opt_feature_overide_disable for checking
whether feature override disable bit is set in
fuse register.
Initialized fuse HAL functions for chips that
make use of those HAL functions.
JIRA NVGPU-615
Change-Id: Iafe5a3940bb19cb3da51e270403450b63c2f67a3
Signed-off-by: Vinod G <vinodg@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1775564
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move all FB HAL implementations to common/fb.
JIRA NVGPU-596
Change-Id: Id4ea09d608f5d6d1b245bddac09ecf1444b8ab30
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1769724
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move queries of FB MMU configuration to FB HAL. Also use g->ltc_count
instead of reading the number of LTCs from FB. These changes together
remove last direct uses of FB registers from GR.
JIRA NVGPU-714
Change-Id: I1b4b46fc2f636f5c1904e4174040a47a27948999
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1773076
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Added prefix gp106_ to sec2_wait_for_halt()
& sec2_clear_halt_interrupt_status() for gp106
SEC2 HAL
- Made changes to gp106_sec2_wait_for_halt() to
read SEC2 falcon mailbox using common falcon
mailbox access functions.
- Add define for falcon mailbox
- These changes are done to reuse gp106 HAL's
for GPU_NEXT.
Change-Id: Id32a7636d775b482684212ed4ef5d01c8ea65335
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1755618
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In gr_gk20a_find_priv_offset_in_buffer() we right now calculate
offset of a register in gpccs segment based on register address type
Separate out sequence to find offset in gpccs segment and move it to new API
gr_gk20a_get_offset_in_gpccs_segment()
Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API
to this HAL
Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct
API
Jira NVGPUT-118
Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1761669
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add remove_gr_sys() op to gpu_ops to reverse steps
done in create_gr_sysfs().
Make gv11b_tegra_remove() specific to gv11b instead
to properly remove sysfs nodes. This also helps in
having gv11b specific remove steps.
Also, update platform remove function of dGPU i.e.
nvgpu_pci_tegra_remove() to remove sysfs nodes. This
adds parity with iGPU platform remove.
Bug 1987855
Change-Id: Ibbaffac5c24346709347f86444a951461894354d
Signed-off-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1735987
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- removed inclusion of linux includes.
- replaced with nvgpu/*.h's
- reformated the function signature of
"css_hw_get_pending_snapshot" and
"css_hw_get_overflow_status" be global instead of
static.
- added get_pending_snapshot and get_overflow_status
to ops->css.
JIRA: VQRM-3699
Change-Id: I177904c263e143b414924c2c28ad6fd3cfd00132
Signed-off-by: Antony Clince Alex <aalex@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1732783
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- On t186, ucode expects physical address to be
programmed for FECS trace buffer.
- On t194, ucode expects GPU VA to be programmed
for FECS trace buffer. This patch adds extra
support to handle this change for linux native.
- Increase the size of FECS trace buffer (as few
entries were getting dropped due to overflow of
FECS trace buffer.)
- This moves FECS trace buffer handling in global
context buffer.
- This adds extra check for updation of mailbox1
register. (Bug 200417403)
EVLR-2077
Change-Id: I7c3324ce9341976a1375e0afe6c53c424a053723
Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1536028
Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add below new HALs to allocate/map/commit global context buffers
gops.gr.alloc_global_ctx_buffers()
gops.gr.map_global_ctx_buffers()
gops.gr.commit_global_ctx_buffers()
Set these HALs for all the supported GPUs
We right now re-use below APIs to set these HALs
gr_gk20a_alloc_global_ctx_buffers()
gr_gk20a_map_global_ctx_buffers()
gr_gk20a_commit_global_ctx_buffers()
Jira NVGPUT-27
Change-Id: I975a54e8d1716af057f982d543787748d35a256e
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1743362
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The WPR will be divided into several sub-WPRs,
one for each Falcon and one common for sharing
between Falcons which bootstrap falcons
- Defined & used flag NVGPU_SUPPORT_MULTIPLE_WPR
to know M-WPR support.
- Added struct lsfm_sub_wpr to hold subWPR header info
- Added struct lsf_shared_sub_wpr_header to hold subWPR
info & copied to WPR blob after LSF_WPR_HEADER
- Set NVGPU_SUPPORT_MULTIPLE_WPR to false for gp106,
gv100 & gv11b.
- Added methods to support to multiple WPR support &
called by checking flag NVGPU_SUPPORT_MULTIPLE_WPR
in ucode blob preparation flow.
JIRA NVGPUTU10X / NVGPUT-99
Change-Id: I81d0490158390e79b6841374158805f7a84ee6cb
Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com>
Reviewed-on: https://git-master.nvidia.com/r/1725369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|