| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
| |
Regenerate HW headers after adding SM debugger registers.
Change-Id: Icc47c11f8e9ff52c0cf1f3a54233fb781c2c2b67
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the number of TPCs is different between GM20B and GK20a,
the function to look up the number of TPCs needs to be halified.
Change-Id: I19dab9a7105814f86c08c92283a0bb70abb6aa00
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Reviewed-on: http://git-master/r/500064
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Create a HAL function for applying the SMPC workaround.The workaround
is only needed on gk20a, and not on gm20b.
Change-Id: I9edc741df32ab7d1dad38ecc56f238828128bfef
Signed-off-by: Mayank Kaushik <mkaushik@nvidia.com>
Reviewed-on: http://git-master/r/539187
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move accesses to MC registers under HAL so that they can be
reimplemented per chip.
Do chip detection and HAL initialization only once.
Bug 1567274
Change-Id: I20bf2f439d267d284bfd536f1a1dfb5d5a2dce4c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/590385
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support added to send PMU and FECS signatures
to ACR ucode
Bug 200046413
Change-Id: Ie1babb640be20a697ad4d6dd18bd11161edb263c
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 41b82e97164138f45fbdaef6ab6939d82ca9419e.
Change-Id: Iabd01fcb124e0d22cd9be62151a6552cbb27fc94
Signed-off-by: Sam Payne <spayne@nvidia.com>
Reviewed-on: http://git-master/r/592221
Tested-by: Hoang Pham <hopham@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Mitch Luban <mluban@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Convert GR and LTC HALs to use const structs, and initialize them
with macros.
Bug 1567274
Change-Id: Ia3f24a5eccb27578d9cba69755f636818d11275c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/590371
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When falcons are secured use PMU commands to reload
FECS firmware.
Bug 200042729
Change-Id: I09f2472b16dac6a510dba067bce3950075973d5f
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/552544
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Synchronize gk20a and gm20b headers. All registers which were added
to gk20a are now added to gm20b, and some registers that are unused
are removed.
Bug 1567274
Change-Id: Ia3b7958c148e495cbff420ee56bb448db0f58680
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/590313
GVS: Gerrit_Virtual_Submit
|
|
|
|
|
|
|
|
|
|
| |
gk20a and gm20b calculate L2 size with different parameters. Split
the function for calculating size so that it does not query GPU id.
Bug 1567274
Change-Id: I09510c1bf0286c9df125d74e51df322c32bde646
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Do not build clock code if TEGRA_CLK_FRAMEWORK is not defined. Also
make GK20A_DEVFREQ depend on TEGRA_CLK_FRAMEWORK, and build scaling
governor only if GK20A_DEVFREQ is enabled.
Bug 1567274
Change-Id: I6ea1462e7a110fb46c9d66ceda71167cff19699e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/562475
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Compute a signature checksum for ctxsw ucode boot section and determine
the format of boot initialization data by it. This unifies gk20a and
gk20b ucode segment loading a lot by separating the bootloader loading
logic to separate functions.
Note: Whenever the boot segment binary changes, its updated signature
must be added here. Management of different bootloaders must be
supported for repo-crossing staging issues.
Bug 1519397
Change-Id: I96f9b905d3631dfdebf71ea3a652a0968615fd0a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/556679
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Include object files of gk20a, gm20b and vgpu in the same composite
object nvgpu.o in the top-level makefile, and remove the old makefiles.
This helps in building the driver as a separate module.
Bug 1476801
Change-Id: I93531c0f1a20e46904a429e492f8ed32e4f0c4a1
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/557971
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Protected GM20b clock initialization from div-by-0 in case when safe
fmax at Vmin is not known, and the respective interface returns zero.
Change-Id: I2064a3182c93f283c7e85c247601203dd1f71af4
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/559059
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
Renamed field and function operated on thermal safe maximum frequency
to make it clear that it is fmax at Vmin (not global fmax).
Change-Id: Ie2b5234e87dc5dc03ccdaeb2916f0b776e56b640
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/559058
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement support for 64kB large page size. Add an API to create an
address space via IOCTL so that we can accept flags, and assign one
flag for enabling 64kB large page size.
Also adds APIs to set per-context large page size. This is possible
only on Maxwell, so return error if caller tries to set large page
size on Kepler.
Default large page size is still 128kB.
Change-Id: I20b51c8f6d4a984acae8411ace3de9000c78e82f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Merge initialization code from gk20a_init_system_vm(),
gk20a_init_bar1_vm() and gk20a_vm_alloc_share() into gk20a_init_vm().
Remove redundant page size data, and move the page size fields to be
VM specific.
Bug 1558739
Bug 1560370
Change-Id: I4557d9e04d65ccb48fe1f2b116dd1bfa74cae98e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Writing start bit twice can confuse falcon and
results in random behavior.
Bug 200040021
Change-Id: I62eb8e4632ac4fc471d931155471084ee0f9d0a4
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bug 200040021
polling halt irq to check for hs bin completion
keep irqs disabled to avoid executing irq handler
Change-Id: Ic245d89580444dcbf1cf5ec34bfe0f8b0c5bbc0f
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/554659
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Override GM20b RAM SVOP PDP fuses with 0x2 setting during clock
initialization.
Bug 1550997
Change-Id: I9a873b892a2db4af384a9a7af4470562cdcb1572
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/499554
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Tested-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Bug 1550997
Change-Id: I25551fdcb9f7d43dc8631305b784aa9c04040139
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/499553
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Tested-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Updated DFS_COEFF slope/intercept parameters
- Specified VCO control gain
- Increased safe DVFS margin to 10%
Bug 1555318
Change-Id: I619704b7ba029d77ea1019a86003c3e8d80d04d8
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/552446
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
When calculating fractional divider in GPCPLL NA mode quantize voltage
before (used to do it after) applying DFS_COEFF, to follow h/w order.
Bug 1555318
Change-Id: I37be2bc73cd1f849695b94acc4ff21caf26e8b97
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/552741
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Removed unnecessary static "initialized" variable (sw_ready flag is
protecting from multiple initializations, anyway).
- Used max frequency at min voltage to set initial configuration of
GPCPLL in both NA and non-NA mode. For backward compatibility made
sure initial PLL output rate do not exceed 1/3 of VCO minimum.
Bug 1555318
Change-Id: If970c27442ea1109d4503a322998a6a26159c345
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/552370
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
dma params for dbg msgs not passed correctly
Change-Id: Ic4ba2bf282b8c339a8c8f6fecd297394fd5771dd
Signed-off-by: Vijayakumar <vsubbu@nvidia.com>
Reviewed-on: http://git-master/r/552073
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move nvgpu ioctls from the many user space interface headers to a new
single nvgpu.h header under include/uapi. No new code or replaced names
are introduced; this change only moves the definitions and changes
include directives accordingly.
Bug 1434573
Change-Id: I4d02415148e437a4e3edad221e08785fac377e91
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/542651
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To help remove the nvhost dependency from nvgpu, rename ioctl defines
and structures used by nvgpu such that nvhost is replaced by nvgpu.
Duplicate some structures as needed.
Update header guards and such accordingly.
Change-Id: Ifc3a867713072bae70256502735583ab38381877
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/542620
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In preparation for GM20B GPCPLL NA data integration:
- Added VCO control initialization code (no data, yet)
- Replaced absolute safe margin with relative percentage
(preliminary 8%)
- Retrieved maximum safe frequency at minimum voltage from GPU DVFS
table, instead of hard-coded macro (also fix the name of the limit:
maximum instead of minimum)
- Updated comments
Bug 1555318
Change-Id: I49a7a90cc4bc29e181065ebd2cf9d214edae6465
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/542462
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for GM20b GPCPLL frequency change in NA mode outside of
bypass. In this case the respective PLL DVFS detection settings are
updated in flight. The implemented algorithm relies on characterization
providing two frequency limits at the same voltage: max frequency on
the F/V curve (Fmax@V) in NA mode with characterized DVFS coefficient,
and safe frequency under the curve when DVFS coefficient is zero
(Fsafe@V, which is effectively the same as Fmax@V in legacy/non-DVFS
mode).
Transition between two Fmax@V points on the curve includes:
- Lowering frequency to Fsafe@V for the minimum V of the transition
end-points
- Setting DVFS coefficient to zero
- Changing DVFS calibration point to the new voltage
- Setting DVFS coefficient characterized for the new voltage
- Setting final target frequency
Note that voltage is changed by Tegra SoC DVFS before (when voltage
increases), or after (whet voltage decreases) the above procedure.
This commit kept NA mode disabled.
Bug 1555318
Change-Id: Ib5620aaa113dc1caa69ecd402d9c6f68e39c472c
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/501042
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for GM20b GPCPLL dynamic ramp in NA mode that requires
ramping of both integer NDIV and fractional SDM_DIN controls. If NA
mode is enabled, dynamic ramp is used only for transition to / from
disabled state. PLL frequency in NA mode is still changed under bypass
only.
This commit kept NA mode disabled.
Bug 1555318
Change-Id: I91f5722a485d1b66b6113aa9c35a2fe36c38ea80
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/500637
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added basic support for GM20b GPCPLL noise-aware(NA) mode. In this
mode PLL internal DVFS mechanism is engaged, and output frequency is
scaled with voltage automatically. The scaling coefficients in this
commit are preliminary, pending characterization.
If NA mode is enabled, any frequency change is done under PLL bypass,
with no dynamic ramp allowed.
This commit kept NA mode disabled.
Bug 1555318
Change-Id: I8d96a10006155635797331bae522fb048d3dc4a0
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/499488
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
| |
Retrieve channel count from gm20b specific header instead of the
gk20a header. This increases channel count from 128 to 512.
Change-Id: I96d4887432852795f7f526e33f0d3d2458f3af0e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/500623
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix build warnings by removing the unused variables, functions and
duplicated code.
Enable -Werror to prevent new build warnings.
Change-Id: Ifd73344a6e12497e6dca595ac7a6edd7ca698f88
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/497374
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Expanded GM20B GPCPLL definitions of DVFS registers.
Bug 1450787
Change-Id: I51d049be70badfedd8c451019b10770b4fb31e80
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/499487
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- add and export API "gk20a_fifo_recover_tsg()" to
recover a TSG
- if TSG is running on any engine, then trigger MMU fault
on those engines
- otherwise, abort each channel in TSG
- modify channel specific API engines_on_ch() to generic
engines_on_id() which will take an ID and a flag to specify
whether ID is for channel or TSG and return engines running
on that ID
- modify channel specific API get_faulty_channel() to generic
get_faulty_id_type() which will take pointers to ID and type
of ID (either a regular channel or TSG)
- remove runlist update from recover_ch() since
no need to touch runlist during recovery
- set error notifier first and then only abort the channels
for TSG recovery path
- also, add necessary accessors to get engine
status type as TSG
Bug 1470692
Change-Id: I7137f611f80916b3d256d4b0dc6e5cf1e93eef6f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/497873
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Restored changing GM20B GPCPLL post-divider in flight with the
following limitation: post divider transition is glitch-less only if
there is common "1" in binary representation of old and new settings.
Transitions that may create glitch are implemented in glitch-less steps
with minimum possible interim divider value (for example, 1 <=> 2
transition has interim value 3: 1 <=> 3 <=> 2).
Steps allowed for glitch-less transitions may not always have frequency
jump at/below VCO min/2 (in the example above 1st step jumps 2/3 of
VCOmin). Enabled external linear divider at 1:2 during such steps.
Used extra write of the same data when changing GM20b linear divider.
Bug 1552225
Change-Id: Ie8fba2fbe44afd34ca68f5f355bd302b7426a632
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/496319
(cherry picked from commit bdd21e0003032fe664bd20f163dbab9942fd1d1d)
Reviewed-on: http://git-master/r/499193
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Skipped PLL re-locking if only post-divider is changing under bypass
- Added 1us delay after switch to bypass clock source
- Changed wait for lock under bypass resolution from 2us to 1us
Change-Id: I259581c00c417752263ef3b2ea057200bb78ecbf
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/495473
(cherry picked from commit d90a19b8bf59c608a2a3a891b34ca714dfe990e9)
Reviewed-on: http://git-master/r/499192
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Disable illegal compstat access interrupt. We access compstat backing
store to handle CDE swizzling.
Also change the magic number for evicted_cb to use a generated value.
Change-Id: I79b299abbffcb90497690ba4fc55d8517a3dbd87
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/496444
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Jussi Rasanen <jrasanen@nvidia.com>
Tested-by: Jussi Rasanen <jrasanen@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
copy disable values in slcg fb to the prod column to
avoid hang issues with SLCG enable.
Bug 1550628
Change-Id: I941c6e625cda41bca8805033b5b2a0387eed4ab5
Signed-off-by: Seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/496122
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add API gk20a_fifo_preempt_tsg() which takes ID of tsg
and preempts it
Bug 1514064
Bug 1470692
Change-Id: I1d52c1dd7a9aecc1314b0f223fe4eedecc033629
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/495583
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Alloc space writes the page size to a field that requires pgsz_idx.
That can cause corruption in internal kernel structures.
Clear_sparse treated a parameter as page size instead of index.
Bug 1549451
Change-Id: I73ce17b99aae6865056facce72d2ab9ca8b3f81d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/495692
|
|
|
|
|
|
|
|
|
|
|
| |
Switch GM20b GPCPLL under bypass when changing post-divider setting
(for now, don't assume that post-divider is glitch-less).
Change-Id: I62b1285c035de0913207a86c41f37b7765da3893
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/495300
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bo Yan <byan@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gr_gk20a.c : railgating path the crash was seen
with multiple frees happening
acr_gm20b.c : failure path, kernel panic was seen,
with multiple frees
Change-Id: Ifc5e78c0ee74799c7f78e6030c02d1a27d545a1e
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: http://git-master/r/494161
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding support for falc_trace for ACR
Change-Id: Iad638b0de72ff122f43f2250dce6a37adab4cecb
Signed-off-by: Supriya <ssharatkumar@nvidia.com>
Reviewed-on: http://git-master/r/494162
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
Regenerate clock gating lists. Add new blocks, and takes them into
use. Also moves some clock gating settings to be applied at the
earliest possible moment right after reset.
Change-Id: I21888186c200f7a477c63bd3332e8ed578f63741
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/457698
|
|
|
|
|
|
|
|
| |
Change-Id: I913b6879e0d1ac89b740c1d088d639cc9b13b9b4
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/494200
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sivaram Nair <sivaramn@nvidia.com>
|
|
|
|
|
|
|
|
| |
Change-Id: I67fe2c4cbab1d43670131d95bbea732e932c0910
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/494164
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When clearing sparse buffers, pte->ref must be cleared once the PTE
is freed.
Bug 1549451
Change-Id: Ie7d3e438ef2c43cbcf893709ae50a67823bf0c9c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/494670
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix order of calculation for max comptag line calculation.
Bug 1549451
Change-Id: I13bf657f0f0b8aafa4d64dacacb74d7224fed379
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/494657
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix L2 error processing to look into interrupts in each L2 and slice.
Enable L2 error interrupts.
Bug 1549451
Change-Id: If6dd77f1333426a10b6a148c9432c12df8d879c7
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/494656
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Deepak Nibade <dnibade@nvidia.com>
|