| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move code that touches host registers and instance block to fifo HAL.
This involves adding HAL ops for the fifo HAL functions that get
called from outside fifo. This clears responsibility of channel by
leaving it only managing channels in software and push buffers.
channel had member ramfc defined, but it was not used, to remove it.
pbdma_acquire_val consisted both of channel logic and hardware
programming. The channel logic was moved to the caller and only
hardware programming was moved.
Change-Id: Id005787f6cc91276b767e8e86325caf966913de9
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1322423
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fifo reset_enable_hw is reorged to clear and enable pbdma/fifo interrupts
after all the required configuration such as configuring timeouts,
enabling timeout detections are taken care of.
JIRA GPUT19X-74
JIRA GPUT19X-47
Change-Id: Id780cc11d858db18f8d748c037954ede73298506
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325351
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Init device_fatal, channel_fatal and restartable fifo intr pbdma s/w
variables for pbdma_intr_0 interrupt masks for each GPU version separately
pbdma_intr_0 field differences for each GPU version:-
-gk20a : bit 28 does not exists in hw
-gm20b : bit 8(lbreq), 20(xbarconnect) and 28 do not exist in hw
-gp10b : bit 8(lbreq), 20(xbarconnect) do not exist in hw. bit 28,
(syncpoint_illegal) added in hw but is not being handled.
-gk20a/gm20b/gp10b
bit 24 eng_reset and bit 25 semaphore always existed in hw but never
handled
JIRA GPUT19X-47
Change-Id: I209191f57c5ea5b15081b7dc2411801d3537017c
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1325402
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
is_preempt_pending fifo ops is added as t19x
preempt done sequence is differnt than legacy
chips.
Change-Id: I6b46be1f5b911ae11bbe806968cb8fabb21848e0
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1309678
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
This change is required to support t19x mmu fault
Change-Id: I3953dcf02c71ace606ba81896e56ea98683eb2ca
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1313482
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fifo ops added for dumping channel & ramfc status
and pbdma & engine status.
Change-Id: Icc739f4f05f0864721954489517fefdfa2fa608a
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1302369
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
| |
*client_type_gpc_v is different for t19x
Change-Id: Ic8f8eff2d98138a877ef95c6f7f40226f0d61a61
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/1313436
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the timer API instead of Linux specific APIs for handling
timeouts.
Also, lower the L2 timeout from 1 second (absurdly long) to 5ms.
Bug 1799159
Change-Id: I27dbc35b12e9bc22ff2207bb87543f76203e20f1
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1273825
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Setting timeslice for virtualized case was not effective,
because both ioctls NVGPU_TSG_IOCTL_SET_TIMESLICE and
NVGPU_SCHED_IOCTL_TSG_SET_TIMESLICE were calling the
native function to set TSG timeslice.
- Fixed wrapper function to call HAL
- Defined HAL function for "native" set TSG timeslice
- Also, properly update timeout_us in TSG context, in
virtualized case.
This change also moves the min/max bounds checking for
tsg timeslice into the native function implementation.
There is no sysfs node for these parameters for vgpu,
as RM server is ultimately responsible for this check.
Bug 200263575
Change-Id: Ibceab9427561ad58ec28abfff0c96ca8f592bdb9
Signed-off-by: Thomas Fleury <tfleury@nvidia.com>
Reviewed-on: http://git-master/r/1283180
Reviewed-by: svccoveritychecker <svccoveritychecker@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the gm20b HW headers to a new directory specially for them:
include/nvgpu/hw/gm20b
And change the code to include like so:
#include <nvgpu/hw/gm20b/hw_fb_gm20b.h>
This is part of the process to restructure the nvgpu driver.
Bug 1799159
Change-Id: I0765e2f6bcd5aa1e803efd250056de3cf9bfa7ed
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/1244791
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix small problems related to signed versus unsigned comparisons
throughout the driver. Bump up the warning level to prevent such
problems from occuring in future.
Change-Id: I8ff5efb419f664e8a2aedadd6515ae4d18502ae0
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1252068
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
| |
If gk20a_engine_id_to_mmu_id() fails, it returns ~0. Deal with this
by checking the results in each call to it.
Change-Id: I6fb9f7151f21a6c4694bfb2ea3c960d344fe629f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1249965
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ia1157198aad248e12e94823eb9f273497c724b2c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1248366
Tested-by: Sachit Kadle <skadle@nvidia.com>
Reviewed-by: David Martinez Nieto <dmartineznie@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When bar1 memory is not supported then userd will be
allocated from sysmem.
Functions gp_get and gp_put are updated accordingly.
JIRA GV11B-1
Change-Id: Ia895712a110f6cca26474228141488f5f8ace756
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1225384
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To handle chip specific runlist entry size and structure,
add and implement relevant functional pointers.
Bug 1735760
Change-Id: I01f3ea78fb21d9fe30c82ba51ef24d7d95ebf90a
Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com>
Reviewed-on: http://git-master/r/1214473
Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com>
Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
add gk20a_aperture_mask() for memory target selection now that buffers
can actually be allocated from vidmem, and use it in all cases that have
a mem_desc available.
Jira DNVGPU-76
Change-Id: I4353cdc6e1e79488f0875581cfaf2a5cfb8c976a
Signed-off-by: Konsta Holtta <kholtta@nvidia.com>
Reviewed-on: http://git-master/r/1169306
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add CE engine to vgpu engine list. CE engine is defined differently
for different GPUs, so we also add HAL for initializing the engine
info.
Bug 1780185
Change-Id: I5ae265551feac08d0c4d45402dd3277514e62b2d
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1169720
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Tested-by: Aingara Paramakuru <aparamakuru@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Lakshmanan M <lm@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL covers the following modification,
1) Added multiple engine_info support
2) Added multiple runlist_info support
3) Initial changes for ASYNC CE support
4) Added ASYNC CE interrupt handling support
for gm206 GPU family
5) Added generic mechanism to identify the
CE engine pri_base address for gm206
(CE0, CE1 and CE2)
6) Removed hard coded engine_id logic and
made generic way
7) Code cleanup for readability
JIRA DNVGPU-26
Change-Id: I2c3846c40bcc8d10c2dfb225caa4105fc9123b65
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1155963
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- make tsg_gk20a.c call HAL for enable/disable channels
- add preempt_tsg HAL callbacks
- add tsg bind/unbind channel HAL callbacks
- add according tsg callbacks for vgpu
Bug 1702773
JIRA VFND-1003
Change-Id: I2cba74b3ebd3920ef09219a168e6433d9574dbe8
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: http://git-master/r/1144932
(cherry picked from commit c3787de7d38651d46969348f5acae2ba86b31ec7)
Reviewed-on: http://git-master/r/1126942
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added device_info_data parsing
support for maxwell GPU series.
JIRA DNVGPU-26
Change-Id: I06dbec6056d4c26501e607c2c3d67ef468d206f4
Signed-off-by: Lakshmanan M <lm@nvidia.com>
Reviewed-on: http://git-master/r/1151602
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We were not using the engine_type field in device info, and the code
did not handle chained entries properly. The code assumed that first
entry is for graphics and second for CE, which is not always true.
Improve the code to go through all entries of device_info, and
preserve values across entries until we reach the last entry.
Only last entry triggers a write to fifo engine info.
There can also be multiple engines with same type, so accumulate
interrupts and reset ids from all of them.
As the code got fixed, now it reads the engine enum correctly from
hardware. We used to compare that against CE0, but we should compare
against CE2.
gk20a_fifo_reset_engine() uses wrong constants - it is passed a
internal numbering of engines, but it compares them against hardware
engine enum.
Change-Id: Ia59273921c602d2a090f7a5b1404afb0fca2532c
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1147746
Reviewed-by: Konsta Holtta <kholtta@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gk20a_fifo_force_reset_ch() does not support vgpu now, so we need to
create a function pointer in gpu_ops and assign it differently for
vgpu and non-vgpu.
Bug 200184349
Change-Id: I5f8f4f731b4b970c4ff8de65531f25568e7691b6
Signed-off-by: Haley Teng <hteng@nvidia.com>
Reviewed-on: http://git-master/r/1130420
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
| |
In Tegra GPU, SoC memory has to be accessed as vidmem. In discrete GPU, it
has to be accessed as sysmem.
Change-Id: I4efe71b54a9a32f0bf1f02ec4016ed74405a14c5
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1120468
|
|
|
|
|
|
|
|
|
|
|
| |
Support GPUs which cannot choose between SMMU and physical
addressing.
Change-Id: If3256fa1bc795a84d039ad3aa63ebdccf5cc0afb
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/1120469
GVS: Gerrit_Virtual_Submit
Reviewed-by: Alex Waterman <alexw@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of improving GPU scheduling, userspace can now set a
channel's timeslice, within reasonable limits imposed by the
kernel driver.
JIRA VFND-1312
Bug 1729664
Change-Id: I4c3430c43437889b8685f12988d4b967bb7877bb
Signed-off-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Reviewed-on: http://git-master/r/1020917
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, only "high" priority bare channels were interleaved
between all other bare channels and TSGs. This patch decouples
priority from interleaving and introduces 3 levels for interleaving
a bare channel or TSG: high, medium, and low. The levels define
the number of times a channel or TSG will appear on a runlist (see
nvgpu.h for details).
By default, all bare channels and TSGs are set to interleave level
low. Userspace can then request the interleave level to be increased
via the CHANNEL_SET_RUNLIST_INTERLEAVE ioctl (TSG-specific ioctl will
be added later).
As timeslice settings will soon be coming from userspace, the default
timeslice for "high" priority channels has been restored.
JIRA VFND-1302
Bug 1729664
Change-Id: I178bc1cecda23f5002fec6d791e6dcaedfa05c0c
Signed-off-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Reviewed-on: http://git-master/r/1014962
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- add gops.fifo.channel_set_priority and move current code
as native callback.
- implement the callback for vgpu
Bug 1701079
Change-Id: If1cd13ea4478d11d578da2f682598e0c4522bcaf
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Reviewed-on: http://git-master/r/932829
Reviewed-by: Aingara Paramakuru <aparamakuru@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
At zcull bind we disable whole GR engine. This is unnecessary, so
instead disable only the channel and make sure it's unloaded.
Introduces also an API in fifo_gk20a.c to do the channel disable.
gr_gk20a_ctx_zcull_setup() was always passed true as last parameter,
so remove parameter.
Change-Id: I7ae6e101ec7d1ab3f6ee4e9bcc442d23dbd21247
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/787570
|
|
|
|
|
|
|
|
|
| |
There were still a couple of places using sg_phys directly. Use new
gk20a_mem_phys() to make the code shorter.
Change-Id: I6eb9b14e0c14a27ec39bacd06ab24e31e99769ca
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/717502
|
|
|
|
|
|
|
|
|
|
| |
Introduce mem_desc, which holds all information needed for a buffer.
Implement helper functions for allocation and freeing that use this
data type.
Change-Id: I82c88595d058d4fb8c5c5fbf19d13269e48e422f
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/712699
|
|
|
|
|
|
|
|
|
|
|
| |
ce2 interrupts enabled only on gk20a and gm20b when
interrupts are handled through hal
Change-Id: Ib570db8f5f41e71e768b95e781153ec8a5d20015
Signed-off-by: Sam Payne <spayne@nvidia.com>
Reviewed-on: http://git-master/r/677447
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
| |
PBDMA HW signature depends on the chip.
Change-Id: If57d721d9bb77a090f967930a1aa2037bf4a16fe
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/672922
|
|
|
|
|
|
|
|
|
| |
Retrieve channel count from gm20b specific header instead of the
gk20a header. This increases channel count from 128 to 512.
Change-Id: I96d4887432852795f7f526e33f0d3d2458f3af0e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/500623
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The nvgpu driver now supports using the Tegra graphics virtualization
interfaces to support gk20a in a virtualized environment.
Bug 1509608
Change-Id: I6ede15ee7bf0b0ad8a13e8eb5f557c3516ead676
Signed-off-by: Aingara Paramakuru <aparamakuru@nvidia.com>
Reviewed-on: http://git-master/r/440122
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement gm20b version of fifo recovery.
Bug 1495967
Change-Id: I2792b217178d157427f49e0c450d4ac620399962
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/394138
Reviewed-on: http://git-master/r/401402
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
|
|
Bug 1450792
Change-Id: I09f7c727a773178613fe555eb025ac324da0008e
Signed-off-by: Kevin Huang <kevinh@nvidia.com>
Reviewed-on: http://git-master/r/381128
Reviewed-on: http://git-master/r/396373
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Bo Yan <byan@nvidia.com>
|