summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/nvgpu/gk20a
Commit message (Collapse)AuthorAge
* gpu: nvgpu: gv10x volt rail boardobj changesMahantesh Kumbar2018-03-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Created volt ops under pmu_ver to support volt_set_voltage, volt_get_voltage & volt_send_load_cmd_to_pmu. - Renamed volt load, set_voltage & get_voltage gp10x method names. - Added new volt load, set_voltage & get_voltage methods for gv10x using RPC & added code to handle ack in pmu_rpc_handler() along with struct rail_list changes. - Updated volt ops of gp106 & gv100 to point to respective methods. - Added member volt_dev_idx_ipc_vmin & volt_scale_exp_pwr_equ_idx to "struct nv_pmu_volt_volt_rail_boardobj_set" & "struct voltage_rail" made changes to update members as needed. - Added member volt_scale_exp_pwr_equ_idx to "struct vbios_voltage_rail_table_1x_entry" to read value from VBIOS table & update rail boardobj set interface. - Defines for volt RPC "NV_PMU_RPC_ID_VOLT_*" - Define struct's volt load, set_voltage & get_voltage to execute volt RPC. Change-Id: I4a41adcf7536468beaa8a73f551b1d608aabd161 Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1659728 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Updated RPC to support copyback & callbackMahantesh Kumbar2018-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Updated & added new parameter "bool is_copy_back" to nvgpu_pmu_rpc_execute() to support copy back processed RPC request from PMU to caller by passing parameter value true & this blocks method till it receives ACK from PMU for requested RPC. - Added "struct rpc_handler_payload" to hold info required for RPC handler like RPC buff address & clear memory if copy back is not requested. - Added define PMU_RPC_EXECUTE_CPB to support to copy back processed RPC request from PMU to caller. - Updated RPC callback handler support, crated memory & assigned default handler if callback is not requested else use callback parameters data to request to PMU. - Added define PMU_RPC_EXECUTE_CB to support callback - Updated pmu_wait_message_cond(), restricted condition check to 8-bit instead 32-bit condition check. Change-Id: Ic05289b074954979fd0102daf5ab806bf1f07b62 Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1664962 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add fault_ch to record_sm_error_stateShashank Singh2018-03-13
| | | | | | | | | | | | | | fault_ch is needed by rm-server to send the notification to guest VM. rm-server is going to use gr sources from linux Jira VQRM-2982 Change-Id: Ifb6e8a9630a471d07b89ffaa7f2ceb309220fd21 Signed-off-by: Shashank Singh <shashsingh@nvidia.com> Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1661665 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: decouple sema and hw semaKonsta Holtta2018-03-13
| | | | | | | | | | | | | | | | | | | | | | | | struct nvgpu_semaphore represents (mainly) a threshold value that a sema at some index will get and struct nvgpu_semaphore_int (aka "hw_sema") represents the allocation (and write access) of a semaphore index and the next value that the sema at that index can have. The threshold object doesn't need a pointer to the sema allocation that is not even guaranteed to exist for the whole threshold lifetime, so replace the pointer by the position of the sema in the sema pool. This requires some modifications to pass a hw sema around explicitly because it now represents write access more explicitly. Delete also the index field of semaphore_int because it can be directly derived from the offset in the sema location and is thus unnecessary. Jira NVGPU-512 Change-Id: I40be523fd68327e2f9928f10de4f771fe24d49ee Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658102 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add placeholder for IPA to PAThomas Fleury2018-03-13
| | | | | | | | | | | | | | | | Add __nvgpu_sgl_phys function that can be used to implement IPA to PA translation in a subsequent change. Adapt existing function prototypes to add pointer to gpu context, as we will need to check if IPA to PA translation is needed. JIRA EVLR-2442 Bug 200392719 Change-Id: I5a734c958c8277d1bf673c020dafb31263f142d6 Signed-off-by: Thomas Fleury <tfleury@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1673142 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: hal for syncpt_incr_per_releaseseshendra Gadagottu2018-03-12
| | | | | | | | | | | | | | Create hal to indicate syncpt increments per release. Legacy chip uses 2 syncpt increments per release and gv1xx onwards uses 1 syncpt increment per release. Bug 2066025 Change-Id: I5d6d0a5368ef561f8150fbb7120181f49f6e338b Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1669817 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add refcounting for ctxsw disable/enableShashank Singh2018-03-12
| | | | | | | | | | | | | | | | | | | | ctxsw disable could be called recursively for RM server. Suspend contexts disables ctxsw at the beginning, then call tsg disable and preempt. If preempt timeout happens, it goes to recovery path, which will try to disable ctxsw again. More details on Bug 200331110. Jira VQRM-2982 Change-Id: I4659c842ae73ed59be51ae65b25366f24abcaf22 Signed-off-by: Shashank Singh <shashsingh@nvidia.com> Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1671716 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Sourab Gupta <sourabg@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: support per-channel wdt timeoutsKonsta Holtta2018-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the padding in nvgpu_channel_wdt_args with a timeout value in milliseconds, and add NVGPU_IOCTL_CHANNEL_WDT_FLAG_SET_TIMEOUT to signify the existence of this new field. When the new flag is included in the value of wdt_status, the field is used to set a per-channel timeout to override the per-GPU default. Add NVGPU_IOCTL_CHANNEL_WDT_FLAG_DISABLE_DUMP to disable the long debug dump when a timed out channel gets recovered by the watchdog. Printing the dump to serial console takes easily several seconds. (Note that there is NVGPU_TIMEOUT_FLAG_DISABLE_DUMP about ctxsw timeout separately for NVGPU_IOCTL_CHANNEL_SET_TIMEOUT_EX as well.) The behaviour of NVGPU_IOCTL_CHANNEL_WDT is changed so that either NVGPU_IOCTL_CHANNEL_ENABLE_WDT or NVGPU_IOCTL_CHANNEL_DISABLE_WDT has to be set. The old behaviour was that other values were silently ignored. The usage of the global default debugfs-controlled ch_wdt_timeout_ms is changed so that its value takes effect only for newly opened channels instead of in realtime. Also, zero value no longer means that the watchdog is disabled; there is a separate flag for that after all. gk20a_fifo_recover_tsg used to ignore the value of "verbose" when no engines were found. Correct this. Bug 1982826 Bug 1985845 Jira NVGPU-73 Change-Id: Iea6213a646a66cb7c631ed7d7c91d8c2ba8a92a4 Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1510898 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: boardobj update for gv10x branchMahantesh Kumbar2018-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Created ops for below boardobj methods to support gp10x & gv10x branch boardobj changes, and defined methods for gv10x with postfix _v1 with below names boardobjgrp_pmucmd_construct_impl boardobjgrp_pmuset_impl boardobjgrp_pmugetstatus_impl is_boardobjgrp_pmucmd_id_valid - These ops are assigned based on PMU version to respective chip. - Modified BOARDOBJGRP_PMU_CMD_GRP_SET_CONSTRUCT & BOARDOBJGRP_PMU_CMD_GRP_GET_STATUS_CONSTRUCT to support gp10x & gv10x branch changes - Updated struct boardobjgrp_pmu_cmd to include members needed for gv10x boardobj changes - Created "struct nv_pmu_rpc_struct_board_obj_grp_cmd" to execute BOARD_OBJ_GRP_CMD using RPC. - Defined method boardobjgrp_pmucmdsend_rpc() to send BOARD_OBJ_GRP_CMD to PMU. Change-Id: If2551bdda80e897e7b21d2966881586f3bbc7a9b Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1656511 GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: PMU super surface supportMahantesh Kumbar2018-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Added ops "pmu.alloc_super_surface" to create memory space for pmu super surface - Defined method nvgpu_pmu_sysmem_surface_alloc() to allocate pmu super surface memory & assigned to "pmu.alloc_super_surface" for gv100 - "pmu.alloc_super_surface" set to NULL for gp106 - Memory space of size "struct nv_pmu_super_surface" is allocated during pmu sw init setup if "pmu.alloc_super_surface" is not NULL & free if error occur. - Added ops "pmu_ver.config_pmu_cmdline_args_super_surface" to describe PMU super surface details to PMU ucode as part of pmu command line args command if "pmu.alloc_super_surface" is not NULL. - Updated pmu_cmdline_args_v6 to include member "struct flcn_mem_desc_v0 super_surface" - Free allocated memory for PMU super surface in nvgpu_remove_pmu_support() method - Added "struct nvgpu_mem super_surface_buf" to "nvgpu_pmu" struct - Created header file "gpmu_super_surf_if.h" to include interface about pmu super surface, added "struct nv_pmu_super_surface" to hold super surface members along with rsvd[x] dummy space to sync members offset with PMU super surface members. Change-Id: I2b28912bf4d86a8cc72884e3b023f21c73fb3503 Signed-off-by: Mahantesh Kumbar <mkumbar@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1656571 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Enable IO coherency on GV100Alex Waterman2018-03-07
| | | | | | | | | | | | | | This reverts commit 848af2ce6de6140323a6ffe3075bf8021e119434. This is a revert of a revert, etc, etc. It re-enables IO coherence again. JIRA EVLR-2333 Change-Id: Ibf97dce2f892e48a1200a06cd38a1c5d9603be04 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1669722 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: BUG_ON for sema increment, not valueKonsta Holtta2018-03-07
| | | | | | | | | | | | | | | | When adding a sema wait to a pushbuf, verify that the sema threshold has been incremented from the original value by reading the incremented field instead of value (which is set to nonzero by nvgpu_semaphore_incr()). Value could be 0 even after an increment if new semas weren't reset to 0. Jira NVGPU-514 Change-Id: I295451fbc7eb9e597aea12d73074e99f74a6a899 Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658100 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle semaphore pendingAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr handle semaphore pending needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I5fee5a491c6e54344f9da477eaf5881c50335bbc Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658298 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add gops.semaphore_wakeup HALRichard Zhao2018-03-06
| | | | | | | | | | | | | | | | | vserver handles semaphore differently from native, so it needs a callback to differentiate from native. Also created common function mc_gk20a_handle_intr_nonstall to handle all nonstall interrupts. Jira VQRM-2982 Change-Id: I1b3821717a4005ca4bf2a4dac5dcd335872f48f1 Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1656753 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add debugger.post_events HAL opAparna Das2018-03-06
| | | | | | | | | | | | RM Server will need to set specific HAL op and notify vgpu client. Jira VQRM-2982 Change-Id: I679565831635ff3fadf0bdc1af5fd7a8679b6fdd Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1660226 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: make gr functions that are used by vsrv globalRichard Zhao2018-03-06
| | | | | | | | | | | | Fixed vsrv link errors for gr unification. Jira VQRM-2982 Change-Id: Icd46792191f1a9aaefbf86d2f3c0b4d5bce2384e Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1664706 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle post event idAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr post event id needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I915d089ef751023968c1e8ab181c21afeec997a5 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658382 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle notify pendingAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr handle notify pending needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I4cb88d4d769a5d5cb98a4ee6ac3fbb74245cb5f2 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658255 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op for gr set error notifierAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr set error notifier needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: Ia445a27112bb6c5587dbb81100a9dafe5875b338 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1657830 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: move chip detect in os specific probe codeAparna Das2018-03-06
| | | | | | | | | | | | | | | | | | This allows moving HAL overrides for vserver out of common chip specific HAL files into os specific probe code. Jira VQRM-3070 Change-Id: Icc61aacc03ac7db7a0ea1f6a2dd2b76185c74757 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1656752 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Richard Zhao <rizhao@nvidia.com> Tested-by: Richard Zhao <rizhao@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv11b: implement gfxp wfi controlsKirill Artamonov2018-03-06
| | | | | | | | | | | | | | | | | | | | /sys/devices/gpu.0/gfxp_wfi_timeout_unit usec - microseconds sysclk - gpu clock count Treat gr_fe_gfxp_wfi_timeout_r as context-switched register on gv11b. Set default gfxp_wfi_timeout to 100 usec to match gp10b at 1GHz. bug 1888344 Signed-off-by: Kirill Artamonov <kartamonov@nvidia.com> Change-Id: I7fa64ce6912ae861244856807543b17bd7a26bed Reviewed-on: https://git-master.nvidia.com/r/1651517 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: modify logic for fecs arb idle checkseshendra Gadagottu2018-03-06
| | | | | | | | | | | | | | | | | Check these conditions for fecs arbiter idle: 1. Wait for gr_fecs_arb_ctx_cmd to idle 2. Wait for gr_fecs_ctxsw_status_1:arb_busy to idle Just waiting for condition 1, only guarantees dispatching of command but not completion of work. Bug 2056266 Change-Id: I3fcbdb9cda91fee0ff345a24bf23ba7dabf268d0 Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1667550 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: clean up memory leaks in gr initSeema Khowala2018-03-06
| | | | | | | | | | | | | | | | | | | | | | This is to resolve memory leak after modifying tpc_fs_mask sysfs which sets gr.sw_ready to false and forces gr to re-initialize. echo 1 > /sys/devices/gpu.0/force_idle echo 5 > /sys/devices/gpu.0/tpc_fs_mask echo 0 > /sys/devices/gpu.0/force_idle Bug 200393029 Change-Id: I76299f53fc87823071c672ec682c3eb51f72f513 Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1666018 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv11b: Correct PMU PG enabled masks.Deepak Goyal2018-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | PMU ucode records supported feature list for a particular chip as support mask sent via PMU_PG_PARAM_CMD_GR_INIT_PARAM. It then enables selective feature list through enable mask sent via PMU_PG_PARAM_CMD_SUB_FEATURE_MASK_UPDATE cmd. Right now only ELPG state machine mask was enabled. Only ELPG state machine was getting executed but other crucial steps in ELPG entry/exit sequence were getting skipped. Bug 200392620. Bug 200296076. Change-Id: I5e1800980990c146c731537290cb7d4c07e937c3 Signed-off-by: Deepak Goyal <dgoyal@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665767 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Seshendra Gadagottu <sgadagottu@nvidia.com> Tested-by: Seshendra Gadagottu <sgadagottu@nvidia.com> Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "Revert "Revert "gpu: nvgpu: Get coherency on gv100 + NVLINK working"""Timo Alho2018-03-05
| | | | | | | | | | | This reverts commit 89fbf39a05483917c0a9f3453fd94c724bc37375. Bug 2075315 Change-Id: Id34a0376be5160b164931926ec600f77edf69667 Signed-off-by: Timo Alho <talho@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1668487 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
* Revert "Revert "gpu: nvgpu: Get coherency on gv100 + NVLINK working""Alex Waterman2018-03-03
| | | | | | | | | | | | | | | This reverts commit 5a35a95654d561fce09a3b9abf6b82bb7a29d74b. JIRA EVLR-2333 Change-Id: I923c32496c343d39d34f6d406c38a9f6ce7dc6e0 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1667167 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add pid field to gk20a_event_id_dataSourab Gupta2018-03-03
| | | | | | | | | | | | | | | | | | QNX is going to reuse the 'struct gk20a_event_id_data' data structure for its event handling. Contrary to linux which works on fd polling, QNX needs the information about the pid to find out which process to deliver the event to. The patch adds the requisite field. Change-Id: I466e9cfaacb921c6e1c41bd92c66194b81fc6774 Signed-off-by: Sourab Gupta <sourabg@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1657994 Reviewed-by: Deepak Nibade <dnibade@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: skip channel abort for deferred resetDeepak Nibade2018-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case deferred_reset_pending is set in gk20a_fifo_handle_mmu_fault() and in gv11b_fifo_teardown_ch_tsg(), we skip resetting the engines and skip setting the error notifier Then we call gk20a_channel_abort()/gk20a_fifo_abort_tsg() which aborts the channels, and resets the syncpoint values to release all the waiters But since we don't set error notifier this could lead User to assume a successful submission without any error To fix this disable channel/TSG in case deferred_reset_pending is set and skip calls to gk20a_channel_abort()/gk20a_fifo_abort_tsg() Note that we finally abort the channel when channel is being closed Bug 200363077 Change-Id: Ia48ca369701c14d1913d8f7b66ed466b7b840224 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1664319 (cherry picked from commit ac40d082e85397f100c3d8377b1f28811485def4) Reviewed-on: https://git-master.nvidia.com/r/1666445 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Seema Khowala <seemaj@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: allocate separate client managed syncpoint for UserDeepak Nibade2018-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We right now allocate a nvgpu managed syncpoint in c->sync and share that with user space But to avoid conflicts between user space and kernel space increments allocate a separate "client managed" syncpoint for User space in c->user_sync Add new API nvgpu_nvhost_get_syncpt_client_managed() to request a client managed syncpoint from nvhost. Note that nvhost/nvgpu do not keep track of MAX/threshold value of this syncpoint Update gk20a_channel_syncpt_create() to receive a flag to indicate whether a User space syncpoint is required or not Unset NVGPU_SUPPORT_USER_SYNCPOINT for gp10b since we don't want to allocate double syncpoints per channel on that platform For gv11b, once we move to use user space submits, support for c->sync will be dropped so we keep using only one syncpoint per channel Bug 200326065 Jira NVGPU-179 Change-Id: I78d94de4276db1c897ea2a4fe4c2db8b2a179722 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665828 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "gpu: nvgpu: support user fence updates"Deepak Nibade2018-03-01
| | | | | | | | | | | | | | | | | | | | This reverts commit 0c46f8a5e112c08c172ee2c692832e1753ffbcce. We should not support tracking of MAX/threshold value for syncpoint allocated by user space Hence revert this patch Bug 200326065 Jira NVGPU-179 Change-Id: I2df8f8c13fdac91c0814b11a2b7dee30153409d4 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665827 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: do not alloc ctx buffers if already allocatedSeema Khowala2018-03-01
| | | | | | | | | | | | | | Bug 200393029 Change-Id: Ic2946958e34bcb9247179fcf2e8735c822155cce Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665338 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Rajkumar Kasirajan <rkasirajan@nvidia.com> Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: introduce explicit nvgpu_sgl typeKonsta Holtta2018-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | The operations in struct nvgpu_sgt_ops have a scatter-gather list (sgl) argument which is a void pointer. Change the type signatures to take struct nvgpu_sgl * which is an opaque marker type that makes it more difficult to pass around wrong arguments, as anything goes for void *. Explicit types add also self-documentation to the code. For some added safety, some explicit type casts are now required in implementors of the nvgpu_sgt_ops interface when converting between the general nvgpu_sgl type and implementation-specific types. This is not purely a bad thing because the casts explain clearly where type conversions are happening. Jira NVGPU-30 Jira NVGPU-52 Jira NVGPU-305 Change-Id: Ic64eed6d2d39ca5786e62b172ddb7133af16817a Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1643555 GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "gpu: nvgpu: Get coherency on gv100 + NVLINK working"Alex Waterman2018-02-28
| | | | | | | | | | | | | | Also revert other changes related to IO coherence. This may be the culprit in a recent dev-kernel lockdown. Bug 2070609 Change-Id: Ida178aef161fadbc6db9512521ea51c702c1564b Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665914 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Srikar Srimath Tirumala <srikars@nvidia.com>
* gpu: nvgpu: Use coherent aperture flagAlex Waterman2018-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using a coherent DMA API wee must make sure to program any aperture fields with the coherent aperture setting. To do this the nvgpu_aperture_mask() function was modified to take a third aperture mask argument, a coherent setting, so that code can use this function to generate coherent aperture settings. The aperture choice is some what tricky: the default version of this function uses the state of the DMA API to determine what aperture to use for SYSMEM: either coherent or non-coherent internally. Thus a kernel user need only specify the normal nvgpu_mem struct and the correct mask should be chosen. Due to many uses of nvgpu_mem structs not created directly from the DMA API wrapper it's easier to translate SYSMEM to SYSMEM_COH after creation. However, the GMMU mapping code, will encounter buffers from userspace with difference coerency attributes than the DMA API. Thus the __nvgpu_aperture_mask() really respects the aperture setting passed in regardless of the DMA API state. This aperture setting is pulled from NVGPU_VM_MAP_IO_COHERENT since this is either passed in from userspace or set by the kernel when using coherent DMA. The aperture field in attrs is upgraded to coh if this flag is set. This change also adds a coherent sysmem mask everywhere that it can. There's a couple places that do not have a coherent register field defined yet. These need to eventually be defined and added. Lastly the aperture mask code has been mvoed from the Linux vm.c code to the general vm.c code since this function has no Linux dependencies. Note: depends on https://git-master.nvidia.com/r/1664536 for new register fields. JIRA EVLR-2333 Change-Id: I4b347911ecb7c511738563fe6c34d0e6aa380d71 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1655220 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: FIFO sched fixesAlex Waterman2018-02-27
| | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous fixes for the sched code: 1. Make sure get_addr() on an SGL respects the use phys flag since the runlist needs physical addresses when NVLINK is in use. 2. Ensure the runlist is contiguous. Since the runlist memory is not virtually addressed the buffer must be physically contiguous. 3. Use all 64 bits of the runlist address in the runlist base addr register (and related fields). JIRA EVLR-2333 Change-Id: Id4fd5ba4665d3e35ff1d6ca78dea6b58894a9a9a Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1654667 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Thomas Fleury <tfleury@nvidia.com> Tested-by: Thomas Fleury <tfleury@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: vgpu: split vgpu.c into vgpu.c and vgpu_linux.cRichard Zhao2018-02-27
| | | | | | | | | | | | vgpu.c will keep common code whil vgpu_linux.c is linux specific. Jira EVLR-2364 Change-Id: Ice9782fa96c256f1b70320886d3720ab0db26244 Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1649943 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "gpu: nvgpu: Use gv11b_css_hw_set_handled_snapshots for GV11B"Srikar Srimath Tirumala2018-02-26
| | | | | | | | | | | | | This reverts commit 2f2e51bbae39009d0305f6aaf01596571a8f5d5c. Bug 2068936 Change-Id: I539cdc12a3bd0d9d7fe0ce7dbe9cb7a274eeaa57 Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1664647 Reviewed-by: Alex Waterman <alexw@nvidia.com> Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit
* gpu: nvgpu: Use gv11b_css_hw_set_handled_snapshots for GV11BMartin Radev2018-02-26
| | | | | | | | | | | | | | | | | | | The value of NV_PERF_PMASYS_MEM_BUMP is different for Volta and NVGPU_IOCTL_CHANNEL_CYCLE_STATS_SNAPSHOT_CMD_FLUSH did not have correct behavior on GV11B due to that. The patch adds an instance of css_hw_set_handled_snapshots for Volta to fix that. The patch also renames css_hw_set_handled_snapshots to gk20a_css_hw_set_handled_snapshots to make it more clear that the function is arch dependent. Bug 1960846 Change-Id: I92c35a862ecd7f918dd1458c086fc7ae42ca8fc5 Signed-off-by: Martin Radev <mradev@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1662427 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: use nvgpu_info in refcount trackingKonsta Holtta2018-02-26
| | | | | | | | | | | | | | | | | | | | | | | Use the nvgpu_info log facility instead of Linux-specific dev_info in gk20a_channel_dump_ref_actions. Also fix format types. dev_info isn't defined anymore in this file and our version is preferred anyway. Refcount tracking isn't compiled in by default, so this has went unnoticed. Jira NVGPU-22 Change-Id: If93b98c9a54d3b0deaf344a355594cb73712399c Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1663032 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-by: Seema Khowala <seemaj@nvidia.com> Reviewed-by: Alex Waterman <alexw@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: support user fence updatesDeepak Nibade2018-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for user fence updates i.e. increments added by user space in pushbuffer directly Add a submit IOCTL flag NVGPU_SUBMIT_GPFIFO_FLAGS_USER_FENCE_UPDATE to indicate if User has added increments in pushbuffer If yes, number_of_increment value is received in fence.value from User If User is adding increments in the pushbuffer then we don't need to do any job tracking in the kernel So fail the submit if we evaluate need_job_tracking to true and FLAGS_USER_FENCE_UPDATE is set User is responsible for ensuring all pre-requisites for a fast submit and to prevent kernel job tracking Since user space adds increments in the pushbuffer, just handle the threshold book keeping in kernel. Bug 200326065 Jira NVGPU-179 Change-Id: Ic0f0b1aa69e3389a4c3305fb6a559c5113719e0f Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1661854 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add user API to get a syncpointDeepak Nibade2018-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new user API NVGPU_IOCTL_CHANNEL_GET_USER_SYNCPOINT which will expose per-channel allocated syncpoint to user space API will also return current value of the syncpoint On supported platforms, this API will also return a RW semaphore address (corresponding to syncpoint shim) to user space Add new characteristics flag NVGPU_GPU_FLAGS_SUPPORT_USER_SYNCPOINT to indicate support for this new API Add new flag NVGPU_SUPPORT_USER_SYNCPOINT for use of core driver Set this flag for GV11B and GP10B for now Add a new API (*syncpt_address) in struct gk20a_channel_sync to get GPU_VA address of a syncpoint Add new API nvgpu_nvhost_syncpt_read_maxval() which will read and return MAX value of syncpoint Bug 200326065 Jira NVGPU-179 Change-Id: I9da6f17b85996f4fc6731c0bf94fca6f3181c3e0 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658009 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv100: fb hal to init and enable nvlinkThomas Fleury2018-02-26
| | | | | | | | | | | | | | | | Add the following hals: (1) init_nvlink to configure nvlink(s) for sysmem in HSHUB (2) enable_nvlink to switch from PCIe sysmem to nvlink sysmem, and setup atomics. Change-Id: I73d2370aaf8e0530158a1091d9efef4a8cf2aac5 Signed-off-by: Thomas Fleury <tfleury@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1648044 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv100: nvlink endpoint driverThomas Fleury2018-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes implements the initial (as per bringup) nvlink driver. (1) SW initialization of nvlink core driver structures (2) Nvlink interrupt handling (3) Device initialization (IOCTRL, pll and clocks, device level intr) (4) Falcon support for minion (5) Minion load and bootstrapping (6) Link initialization and DL PROD settings (7) Device Interface init (and switching HSHUB to nvlink) (8) HS set/get mode for both link and sublink (9) Topology discovery and VBIOS settings. (10) Ensures we get physical contiguous memory when Nvlink is enabled This driver includes a hack for the current single dev/single link limitation. JIRA: EVLR-2331 JIRA: EVLR-2330 JIRA: EVLR-2329 JIRA: EVLR-2328 Change-Id: Idca9a819179376cc655784482b24b575a52fa9e5 Signed-off-by: Thomas Fleury <tfleury@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1656790 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Cleanup unused variablesAlex Waterman2018-02-24
| | | | | | | | | | | | | | | | There are numerous places where variables are assigned to but then never used. This patch cleans up all these unused variables and in some cases simplifies surrounding logic. Also delete unused header includes and add necessary header includes. JIRA NVGPU-525 Signed-off-by: Alex Waterman <alexw@nvidia.com> Change-Id: Ice9ec2a0e97f262d0dcfebe22f83208dbea569d9 Reviewed-on: https://git-master.nvidia.com/r/1662548 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Cleanup warnings and LinuxismsAlex Waterman2018-02-24
| | | | | | | | | | | | | | | | | | Remove a variable which is assigned to but never used after that and convert a pr_warn() into an nvgpu_warn(). JIRA NVGPU-525 Signed-off-by: Alex Waterman <alexw@nvidia.com> Change-Id: Ia3ab64063ec48d6cd8a4a13cff2ab9b9c459a462 Reviewed-on: https://git-master.nvidia.com/r/1662544 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-by: Konsta Holtta <kholtta@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Abstract kernel_restart()Alex Waterman2018-02-24
| | | | | | | | | | | | | | | | | | This function is used in gk20a.c to handle catastrophic error conditions but is Linux specific. As such, implement an abstraction for this in driver_common.c and expose the API in nvgpu_common.h. JIRA NVGPU-525 Signed-off-by: Alex Waterman <alexw@nvidia.com> Change-Id: Ie2e417d30af5ff7db76f4d2d5b97ec96c386bd04 Reviewed-on: https://git-master.nvidia.com/r/1662543 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Deepak Nibade <dnibade@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Don't alloc comptags on GV100Alex Waterman2018-02-23
| | | | | | | | | | | We don't have compression enabled on GV100 so it does not make sense to allocate a huge CBC for this device. Change-Id: I0ff908571f28c2ba6f439b0989398bf68dce16f9 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1655279 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Cleanup map attributes debuggingAlex Waterman2018-02-22
| | | | | | | | | | | Make the map attributes printed by map debug code are more easily readable and consistent. Change-Id: I9737131a2ea44c6a080dff0095929760888b83ae Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1654518 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Use preallocated VPR bufferTerje Bergstrom2018-02-15
| | | | | | | | | | | | To prevent deadlock while allocating VPR in nvgpu, allocate all the needed VPR memory at probe time and use an internal allocator to hand out space for VPR buffers. Change-Id: I584b9a0f746d5d1dec021cdfbd6f26b4b92e4412 Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1655324 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add user API to get read-only syncpoint address mapDeepak Nibade2018-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add User space API NVGPU_AS_IOCTL_GET_SYNC_RO_MAP to get read-only syncpoint address map in user space We already map whole syncpoint shim to each address space with base address being vm->syncpt_ro_map_gpu_va This new API exposes this base GPU_VA address of syncpoint map, and unit size of each syncpoint to user space. User space can then calculate address of each syncpoint as syncpoint_address = base_gpu_va + (syncpoint_id * syncpoint_unit_size) Note that this syncpoint address is read_only, and should be only used for inserting semaphore acquires. Adding semaphore release with this address would result in MMU_FAULT Define new HAL g->ops.fifo.get_sync_ro_map and set this for all GPUs supported on Xavier SoC Bug 200327559 Change-Id: Ica0db48fc28fdd0ff2a5eb09574dac843dc5e4fd Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1649365 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-12 18:10:28 -0400