summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/nvgpu/gk20a/gr_gk20a.c
Commit message (Collapse)AuthorAge
...
* gpu: nvgpu: Initialize hwpm perfmons (engine_sel)Vaibhav Kachore2018-07-10
| | | | | | | | | | | | | | - For Mode-E ctxsw it is required that engine_sel is set to 0xFFFFFFFF. - Default 0 is a valid signal and causes problems. Bug 2106999 Change-Id: I5cdb4441a8e6d7e8133c31a9e361b54611dd2995 Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1770755 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: enable HWPM Mode-E context switchVaibhav Kachore2018-07-10
| | | | | | | | | | | | | | | | | | - Write new pm mode to context buffer header. Ucode use this mode to enable mode-e context switch. This is Mode-B context switch of PMs with Mode-E streamout on one context. If this mode is set, Ucode makes sure that Mode-E pipe (perfmons, routers, pma) is idle before it context switches PMs. - This allows us to collect counters in a secure way (i.e. on context basis) with stream out. Bug 2106999 Change-Id: I5a7435f09d1bf053ca428e538b0a57f3a175ac37 Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1760366 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: fix ppc broadcast address splitDeepak Nibade2018-07-05
| | | | | | | | | | | | | | | | | | | | | | In gr_gk20a_split_ppc_broadcast_addr() we convert a PPC broadcast address to its corresponding unicast address list But we consider gr.pe_count_per_gpc instead of actual number of PPCs and that leads to generating incorrect list of addresses Fix this by using gr.gpc_ppc_count[gpc_num] which gives correct number of PPC count Jira NVGPUT-117 Change-Id: If7e7c19244b90cb3c405dcba4ae7a86c782972f7 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1767838 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add HAL to get offset in gpccs segmentDeepak Nibade2018-07-05
| | | | | | | | | | | | | | | | | | | | | | In gr_gk20a_find_priv_offset_in_buffer() we right now calculate offset of a register in gpccs segment based on register address type Separate out sequence to find offset in gpccs segment and move it to new API gr_gk20a_get_offset_in_gpccs_segment() Introduce new HAL gops.gr.get_offset_in_gpccs_segment() and set above API to this HAL Call HAL from gr_gk20a_find_priv_offset_in_buffer() instead of calling direct API Jira NVGPUT-118 Change-Id: I0df798456cf63e3c3a43131f3c4ca7990b89ede0 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1761669 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: remove unnecessary nvgpu_memset callsKonsta Holtta2018-06-28
| | | | | | | | | | | | | | | | Some graphics context buffers are explicitly cleared to zero after allocation. That's not necessary because the allocator gives zero-initialized memory already, so remove the clears. Change-Id: I8f9913605801e35082762e7743762d97f88e1d12 Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1761578 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Alex Waterman <alexw@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: don't mem_{begin,end}() for grKonsta Holtta2018-06-28
| | | | | | | | | | | | | | | | | | | | | Now that GR buffers always have a kernel mapping, remove the unnecessary calls to nvgpu_mem_begin() and nvgpu_mem_end() on these buffers: - global ctx buffer mem in gr - gr ctx mem in a tsg - patch ctx mem in a gr ctx - pm ctx mem in a gr ctx - ctx_header mem in a channel (subctx header) Change-Id: Id2a8ad108aef8db8b16dce5bae8003bbcd3b23e4 Signed-off-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1760599 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Alex Waterman <alexw@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Do not use NO_KERNEL_MAPPING for GRTerje Bergstrom2018-06-20
| | | | | | | | | | | | | | | | With arm64 mapping buffers to CPU is free. Remove the use of NO_KERNEL_MAPPING. Change-Id: Ic99ca6b7f8c698e2d3cb1d61a821939798bb237b Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1753709 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com> Reviewed-by: Debarshi Dutta <ddutta@nvidia.com> Reviewed-by: Lakshmanan M <lm@nvidia.com> Reviewed-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add support for FECS VAVaibhav Kachore2018-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | - On t186, ucode expects physical address to be programmed for FECS trace buffer. - On t194, ucode expects GPU VA to be programmed for FECS trace buffer. This patch adds extra support to handle this change for linux native. - Increase the size of FECS trace buffer (as few entries were getting dropped due to overflow of FECS trace buffer.) - This moves FECS trace buffer handling in global context buffer. - This adds extra check for updation of mailbox1 register. (Bug 200417403) EVLR-2077 Change-Id: I7c3324ce9341976a1375e0afe6c53c424a053723 Signed-off-by: Vaibhav Kachore <vkachore@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1536028 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Nirav Patel <nipatel@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: correct calculation of sm_id for .record_sm_error_stateRichard Zhao2018-06-14
| | | | | | | | | | | | | | | | | | Starting with Volta, one TPC could have more than 1 SMs. So .record_sm_error_state needs to have sm number as parameter. Logic tpc id should be read from gr_gpc0_gpm_pd_sm_id_r. Let the function return logical sm_id. RM server will need it to nofify client. Jira EVLR-2643 Bug 200405202 Change-Id: Iffaff05b89b1c5058616b8a6bf50dd73bd4e52f6 Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1742165 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: export APIs to allocate/destroy context buffersDeepak Nibade2018-06-14
| | | | | | | | | | | | | | | | | Export below APIs in gr_gk20a.h header gk20a_gr_alloc_ctx_buffer() gk20a_gr_destroy_ctx_buffer() Jira NVGPUT-27 Change-Id: Ia181a3f464ffbc9abe12963dd709cebee9e7dbc9 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1743364 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add HALs to allocate/map/commit global context buffersDeepak Nibade2018-06-14
| | | | | | | | | | | | | | | | | | | | | | Add below new HALs to allocate/map/commit global context buffers gops.gr.alloc_global_ctx_buffers() gops.gr.map_global_ctx_buffers() gops.gr.commit_global_ctx_buffers() Set these HALs for all the supported GPUs We right now re-use below APIs to set these HALs gr_gk20a_alloc_global_ctx_buffers() gr_gk20a_map_global_ctx_buffers() gr_gk20a_commit_global_ctx_buffers() Jira NVGPUT-27 Change-Id: I975a54e8d1716af057f982d543787748d35a256e Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1743362 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Move setting priv interrupt to priv_ringTerje Bergstrom2018-06-14
| | | | | | | | | | | | | Registers to set priv interrupts are in priv_ring, but the code was in bus HAL. Move the code and related HALs to priv_ring instead. JIRA NVGPU-588 Change-Id: I708d11f77405dbba86586a0d1da42f65bcc1de9d Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1730889 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: initialze bundle64 stateDeepak Nibade2018-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | We receive bundle with address and 64 bit values from ucode on some platforms This patch adds the support to handle 64 bit values Add struct av64_gk20a to store an address and corresponding 64 bit value Add struct av64_list_gk20a to store count and list of av64_gk20a Add API alloc_av64_list_gk20a() to allocate the list that supports 64bit values In gr_gk20a_init_ctx_vars_fw(), if we see NETLIST_REGIONID_SW_BUNDLE64_INIT, load the bundle64 state into above local structures Add new HAL gops.gr.init_sw_bundle64() and call it from gk20a_init_sw_bundle() if defined Also load the bundle for simulation cases in gr_gk20a_init_ctx_vars_sim() Jira NVGPUT-96 Change-Id: I1ab7fb37ff91c5fbd968c93d714725b01fd4f59b Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1736450 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: fix crash due to accessing incorrect TSG pointerDeepak Nibade2018-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In gk20a_gr_isr(), we handle various errors including GPC/TPC errors. And then if BPT errors are pending we call gk20a_gr_post_bpt_events() at the end and pass channel pointer to it gk20a_gr_post_bpt_events() extracts TSG pointer based on ch->tsgid But in some race conditions it is possible that we clear the error and trigger recovery and as a result channel is unbounded from TSG and closed by user space before calling gk20a_gr_post_bpt_events() And in that case the code above results in getting incorrect TSG pointer and hence crashes as below Unable to handle kernel paging request at virtual address ffffff8012000c08 ... [<ffffff8008081f84>] el1_da+0x24/0xb4 [<ffffff80086e72e0>] gk20a_tsg_get_event_data_from_id+0x30/0xb0 [<ffffff80086e7560>] gk20a_tsg_event_id_post_event+0x50/0xc8 [<ffffff800872922c>] gk20a_gr_isr+0x27c/0x12e0 To fix this extract the TSG pointer before handling all the errors and pass this pointer to gk20a_gr_post_bpt_events() will post the events if they are enabled and if TSG is still open Bug 200404720 Change-Id: I4861c72e338a2cec96f31cb9488af665c5f2be39 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1735415 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vinod Gopalakrishnakurup <vinodg@nvidia.com> Reviewed-by: Alex Waterman <alexw@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: support CAU ctxsw listDeepak Nibade2018-05-30
| | | | | | | | | | | | | | | | | | | | | | | CAU (Counter Aggregation Unit) registers might be split out from SMPC registers and moved into their own list on some platforms In gr_gk20a_init_ctx_vars_fw() add support to check if pm_cau list is available If list is available, count will be set to non-zero here In add_ctxsw_buffer_map_entries_gpcs(), parse the pm_cau list if count is non-zero Bug 2139870 Change-Id: Ia630e7d03481a6f927c6739d28ebfe49f221326f Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1733208 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Braun (SW-GPU) <matthewb@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Code updates for MISRA violationsVinod G2018-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | Code related to MC module is updated for handling MISRA violations Rule 10.1: Operands shalln't be an inappropriate essential type. Rule 10.3: Value of expression shalln't be assigned to an object with a narrow essential type. Rule 10.4: Both operands in an operator shall have the same essential type. Rule 14.4: Controlling if statement shall have essentially Boolean type. Rule 15.6: Enclose if() sequences with braces. JIRA NVGPU-646 JIRA NVGPU-659 JIRA NVGPU-671 Change-Id: Ia7ada40068eab5c164b8bad99bf8103b37a2fbc9 Signed-off-by: Vinod G <vinodg@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1720926 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: dump fecs method data and push adrSeema Khowala2018-05-10
| | | | | | | | | | | Dump fecs method data and adr if ucode times out or errors out. This is good to have for debugging. Change-Id: I79c4bc3bc30cfd09f273f4eb6b53863653227ecd Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1707761 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Remove gk20a_dbg* functionsTerje Bergstrom2018-05-09
| | | | | | | | | | | | | | | Switch all logging to nvgpu_log*(). gk20a_dbg* macros are intentionally left there because of use from other repositories. Because the new functions do not work without a pointer to struct gk20a, and piping it just for logging is excessive, some log messages are deleted. Change-Id: I00e22e75fe4596a330bb0282ab4774b3639ee31e Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1704148 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add rc_type i/p param to gk20a_fifo_recoverSeema Khowala2018-05-04
| | | | | | | | | | | | | | | | | | | | | Add below rc_types to be passed to gk20a_fifo_recover MMU_FAULT PBDMA_FAULT GR_FAULT PREEMPT_TIMEOUT CTXSW_TIMEOUT RUNLIST_UPDATE_TIMEOUT FORCE_RESET SCHED_ERR This is nice to have to know what triggered recovery. Bug 2065990 Change-Id: I202268c5f237be2180b438e8ba027fce684967b6 Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1662619 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add gr hal for fecs_ctxsw_mailbox sizeSeema Khowala2018-05-01
| | | | | | | | | | | | | | fecs_ctxsw_mailbox_size varies per chip. Use hal to get the size. Also dump fecs_ctxsw_status_1 to help debug Bug 2093809 Change-Id: I5a50281e9d78fe0e4a75d03971169e3e9679967a Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1698026 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add HAL to set ppriv timeoutsDeepak Nibade2018-04-22
| | | | | | | | | | | | | | | | | | Add new HAL gops.bus.set_ppriv_timeout_settings() to set platform specific ppriv timeouts Set this HAL for all supported GPUs for now Jira NVGPUT-35 Change-Id: I88b438a7bf381d0216e0947a16cd267461d0e8d7 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1699314 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Richard Zhao <rizhao@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "gpu: nvgpu: add hal op for gr set error notifier"Richard Zhao2018-04-19
| | | | | | | | | | | | | | | This reverts commit d6c6c6c483478654b34685b9e13ed160bad49a1c. RM server has moved to gops.fifo.set_error_notifier. gops.gr.set_error_notifier is not needed anymore. Jira VQRM-3058 Change-Id: I0fe7f914778ce66701a699aece2b36a5cd8079da Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1679708 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv100: consider floorswept FBPA for getting unicast listDeepak Nibade2018-04-16
| | | | | | | | | | | | | | | | | | | | | | | | In gr_gv11b/gk20a_create_priv_addr_table() we do not consider floorswept FBPAs and just calculate the unicast list assuming all FBPAs are present This generates incorrect list of unicast addresses Fix this introducing new HAL ops.gr.split_fbpa_broadcast_addr Set gr_gv100_get_active_fpba_mask() for GV100 Set gr_gk20a_split_fbpa_broadcast_addr() for rest of the chips gr_gv100_get_active_fpba_mask() will first get active FPBA mask and generate unicast list only for active FBPAs Bug 200398811 Jira NVGPU-556 Change-Id: Idd11d6e7ad7b6836525fe41509aeccf52038321f Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1694444 GVS: Gerrit_Virtual_Submit Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: fix gpc/tpc index for SMPC broadcast conversionDeepak Nibade2018-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | In gv11b_gr_egpc_etpc_priv_addr_table(), we call gv11b_gr_update_priv_addr_table_smpc() to convert SMPC broadcast address into list of unicast addresses But before calling gv11b_gr_update_priv_addr_table_smpc() we sometimes incorrectly set gpc_num/tpc_num to zero and that leads to generating incorrect list of unicast addresses Remove this incorrect initialization of gpc_num/tpc_num Also update gv11b_gr_egpc_etpc_priv_addr_table() to receive tpc_num along with gpc_num Bug 2099717 Jira NVGPU-580 Change-Id: Idd4e5f78dbe6ca1800efae93c66355d06417d1f2 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1691373 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: use HAL for chiplet offsetDeepak Nibade2018-04-10
| | | | | | | | | | | | | | | | | | | | | | | | We currently use hard coded values of NV_PERF_PMMGPC_CHIPLET_OFFSET and NV_PMM_FBP_STRIDE which are incorrect for Volta Add new GR HAL get_pmm_per_chiplet_offset() to get correct value per-chip Set gr_gm20b_get_pmm_per_chiplet_offset() for older chips Set gr_gv11b_get_pmm_per_chiplet_offset() for Volta Use HAL instead of hard coded values wherever required Bug 200398811 Jira NVGPU-556 Change-Id: I947e7febd4f84fae740a1bc74f99d72e1df523aa Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1690028 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add support to get unicast addresses on voltaDeepak Nibade2018-04-10
| | | | | | | | | | | | | | | | | | | | | | | | We have new broadcast registers on Volta, and we need to generate correct unicast addresses for them so that we can write those registers to context image Add new GR HAL create_priv_addr_table() to do this conversion Set gr_gk20a_create_priv_addr_table() for older chips Set gr_gv11b_create_priv_addr_table() for Volta gr_gv11b_create_priv_addr_table() will use the broadcast flags and then generate appriate list of unicast register for each broadcast register Bug 200398811 Jira NVGPU-556 Change-Id: Id53a9e56106d200fe560ffc93394cc0e976f455f Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1690027 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add broadcast address decode support for voltaDeepak Nibade2018-04-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With Volta we have more number of broadcast registers than previous chips and we don't decode them right now in gr_gk20a_decode_priv_addr() Add a new GR HAL decode_priv_addr() and set gr_gk20a_decode_priv_addr() for all previous chips Add and use gr_gv11b_decode_priv_addr() for Volta gr_gv11b_decode_priv_addr() will decode all the broadcast registers and set the broadcast flags apporiately Define below new broadcast types PRI_BROADCAST_FLAGS_PMMGPC PRI_BROADCAST_FLAGS_PMM_GPCS PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCA PRI_BROADCAST_FLAGS_PMM_GPCGS_GPCTPCB PRI_BROADCAST_FLAGS_PMMFBP PRI_BROADCAST_FLAGS_PMM_FBPS PRI_BROADCAST_FLAGS_PMM_FBPGS_LTC PRI_BROADCAST_FLAGS_PMM_FBPGS_ROP Bug 200398811 Jira NVGPU-556 Change-Id: Ic673b357a75b6af3d24a4c16bb5b6bc15974d5b7 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1690026 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gk20a: Use ENOSPC instead of ENOMEMmpurohit2018-04-06
| | | | | | | | | | | | | | | | | | | | | | Modify gr_gk20a_add_zbc() to return -ENOSPC instead of -ENOMEM when all slots are already used. ENOMEM is more meant for memory allocation failures, anyway. This is required for porting nvgpu_gpu_zbc test case using libnvrm_gpu APIs. Bug 1967537 JIRA VQRM-3348 Change-Id: Ib7bcb6ba94d2ca168bcad517a8a7260fbf278a91 Signed-off-by: Mahesh Purohit <mpurohit@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1688302 Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Bharat Nihalani <bnihalani@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Konsta Holtta <kholtta@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: handle misaligned_addr SM exceptionDeepak Nibade2018-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | We right now do not handle misaligned_addr SM exception explicitly and hence we incorrectly initiate CILP on this exception Handle this exception explicitly in this sequence - - set error notifier first - clear the interrupt - return error from gr_gv11b_handle_warp_esr_error_misaligned_addr() so that RC recovery is triggered by gk20a_gr_isr() Ensure that the error value is propagated back to gk20a_gr_isr() correctly Use nvgpu_set_error_notifier_if_empty() to set error notifier since this will prevent overwriting of error notifier value in case gk20a_gr_isr() also tries to write to some error notifier value Bug 200388475 Jira NVGPU-554 Change-Id: I84c4d202a8068e738567ccd344e05d9d5f6ad2f0 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1686781 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: initialize ctxsw state for golden context creationseshendra Gadagottu2018-04-03
| | | | | | | | | | | | | | | | | | | | If golden context creation happens before any gpu railgate then channel creation is always fine. If gpu railgate happens after gpu finalize poweon, but before golden context creation, then golden context creation is failing during first channel creation with watchdog timeout from ctxsw because of invalid ctxsw state. To Fix this issue, if the golden context is not created, then during finalize power on always query ctxsw image sizes, which is making ctxsw hw in correct state before golden context creation. Bug 2051863 Change-Id: I81d221100a099b12bad3adc2d252de4621c335a5 Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1682265 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: fix address table for GPCS_TPC6 broadcast conversionDeepak Nibade2018-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | In gr_gk20a_create_priv_addr_table() and gv11b_gr_egpc_etpc_priv_addr_table(), we create a table of unicast addresses from broadcast addresses For GPC boardcast addresses like NV_PGRAPH_PRI_EGPCS_ETPC6_SM_*, we generate the table assuming there are 7 TPCs in all the GPCs But this is incorrect in some cases like GV100 where GPC0/1 have only 6 TPCs And hence we end up generating registers which do not exist Fix this by explicitly checking the number of TPCs and ensuring that address generated is belongs to valid TPC Bug 200400376 Jira NVGPU-564 Change-Id: I65d7d6cd7f0bf16171eb54ed71f1f3840ade3495 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1686806 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add gops.fifo.set_error_notifierRichard Zhao2018-03-29
| | | | | | | | | | | | RM Server overrides it for handling stall interrupts. Jira VQRM-3058 Change-Id: I8b14f073e952d19c808cb693958626b8d8aee8ca Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1679709 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: use gpc_tpc_count[gpc] for number of tpc in a gpcSeema Khowala2018-03-29
| | | | | | | | | | | | | | | | | | | | | Using tpc_count instead of gpc_tpc_count indexed by gpc, will result in pbus error with decode error or client floorswept error codes. tpc_count represents total number of tpc while gpc_tpc_count[gpc] represents number of tpc in the indexed gpc. Bug 1998067 Change-Id: I9adfb98a6c3e209cbb02a8cd5090f6b6adc1ec4b Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1682469 Reviewed-by: Thomas Fleury <tfleury@nvidia.com> Tested-by: Thomas Fleury <tfleury@nvidia.com> Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv100: fix PMA list alignment in ctxsw bufferDeepak Nibade2018-03-21
| | | | | | | | | | | | | | | | | | | | | | | | GV100 ucode is changed so that it expects LIST_nv_perf_pma_ctx_reg list in ctxsw buffer to be 256 byte aligned but same change is not applied to other chip ucodes ADD new HAL (*add_ctxsw_reg_perf_pma) to configure PMA register list and define a common HAL gr_gk20a_add_ctxsw_reg_perf_pma() for all other chips except GV100 Define a separate HAL for GV100 gr_gv100_add_ctxsw_reg_perf_pma() and fix the required alignment in this function Bug 1998067 Change-Id: Ie172fe90e2cdbac2509f2ece953cd8552e66fc56 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1676655 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: gv100: fix num_fbpas while adding ctxsw buffer entriesDeepak Nibade2018-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For LIST_nv_pm_fbpa_ctx_regs, we right now call add_ctxsw_buffer_map_entries_subunits() to add registers corresponding to all the FBPAs But while configuring total number of registers, we do not consider floorswept FBPAs and that causes misalignment in subsequent lists for GV100 Fix this by reading disabled/floorswept FBPAs from fuse and consider only those FBPAs which are active for GV100 Add new HAL (*add_ctxsw_reg_pm_fbpa) to support this setting and define a common HAL gr_gk20a_add_ctxsw_reg_pm_fbpa() for all chips except GV100 Define GV100 specific gr_gv100_add_ctxsw_reg_pm_fbpa() with above mentioned implementation to consider floorsweeping Bug 1998067 Change-Id: Id560551bb0b8142791c117b6d27864566c90b489 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1676654 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Vijayakumar Subbu <vsubbu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add gpu_va to update_hwpm_ctxsw_mode parameters()Aparna Das2018-03-16
| | | | | | | | | | | | | | | | | It'll allow the function to use fixed mapping. Jira VQRM-2982 Change-Id: I98159c5b199ce1854b1b40704392237cadb71ef2 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1660225 Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Tested-by: Richard Zhao <rizhao@nvidia.com> Reviewed-by: Nirav Patel <nipatel@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add fault_ch to record_sm_error_stateShashank Singh2018-03-13
| | | | | | | | | | | | | | fault_ch is needed by rm-server to send the notification to guest VM. rm-server is going to use gr sources from linux Jira VQRM-2982 Change-Id: Ifb6e8a9630a471d07b89ffaa7f2ceb309220fd21 Signed-off-by: Shashank Singh <shashsingh@nvidia.com> Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1661665 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add refcounting for ctxsw disable/enableShashank Singh2018-03-12
| | | | | | | | | | | | | | | | | | | | ctxsw disable could be called recursively for RM server. Suspend contexts disables ctxsw at the beginning, then call tsg disable and preempt. If preempt timeout happens, it goes to recovery path, which will try to disable ctxsw again. More details on Bug 200331110. Jira VQRM-2982 Change-Id: I4659c842ae73ed59be51ae65b25366f24abcaf22 Signed-off-by: Shashank Singh <shashsingh@nvidia.com> Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1671716 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Sourab Gupta <sourabg@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: Enable IO coherency on GV100Alex Waterman2018-03-07
| | | | | | | | | | | | | | This reverts commit 848af2ce6de6140323a6ffe3075bf8021e119434. This is a revert of a revert, etc, etc. It re-enables IO coherence again. JIRA EVLR-2333 Change-Id: Ibf97dce2f892e48a1200a06cd38a1c5d9603be04 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1669722 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle semaphore pendingAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr handle semaphore pending needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I5fee5a491c6e54344f9da477eaf5881c50335bbc Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658298 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add debugger.post_events HAL opAparna Das2018-03-06
| | | | | | | | | | | | RM Server will need to set specific HAL op and notify vgpu client. Jira VQRM-2982 Change-Id: I679565831635ff3fadf0bdc1af5fd7a8679b6fdd Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1660226 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: make gr functions that are used by vsrv globalRichard Zhao2018-03-06
| | | | | | | | | | | | Fixed vsrv link errors for gr unification. Jira VQRM-2982 Change-Id: Icd46792191f1a9aaefbf86d2f3c0b4d5bce2384e Signed-off-by: Richard Zhao <rizhao@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1664706 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle post event idAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr post event id needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I915d089ef751023968c1e8ab181c21afeec997a5 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658382 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op to handle notify pendingAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr handle notify pending needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: I4cb88d4d769a5d5cb98a4ee6ac3fbb74245cb5f2 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1658255 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: add hal op for gr set error notifierAparna Das2018-03-06
| | | | | | | | | | | | | | The vserver variant for gr set error notifier needs different functionality to send interrupt to VM. Add HAL operation to allow overriding vserver usecase. Jira VQRM-2982 Change-Id: Ia445a27112bb6c5587dbb81100a9dafe5875b338 Signed-off-by: Aparna Das <aparnad@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1657830 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: modify logic for fecs arb idle checkseshendra Gadagottu2018-03-06
| | | | | | | | | | | | | | | | | Check these conditions for fecs arbiter idle: 1. Wait for gr_fecs_arb_ctx_cmd to idle 2. Wait for gr_fecs_ctxsw_status_1:arb_busy to idle Just waiting for condition 1, only guarantees dispatching of command but not completion of work. Bug 2056266 Change-Id: I3fcbdb9cda91fee0ff345a24bf23ba7dabf268d0 Signed-off-by: seshendra Gadagottu <sgadagottu@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1667550 Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: clean up memory leaks in gr initSeema Khowala2018-03-06
| | | | | | | | | | | | | | | | | | | | | | This is to resolve memory leak after modifying tpc_fs_mask sysfs which sets gr.sw_ready to false and forces gr to re-initialize. echo 1 > /sys/devices/gpu.0/force_idle echo 5 > /sys/devices/gpu.0/tpc_fs_mask echo 0 > /sys/devices/gpu.0/force_idle Bug 200393029 Change-Id: I76299f53fc87823071c672ec682c3eb51f72f513 Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1666018 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* Revert "Revert "Revert "gpu: nvgpu: Get coherency on gv100 + NVLINK working"""Timo Alho2018-03-05
| | | | | | | | | | | This reverts commit 89fbf39a05483917c0a9f3453fd94c724bc37375. Bug 2075315 Change-Id: Id34a0376be5160b164931926ec600f77edf69667 Signed-off-by: Timo Alho <talho@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1668487 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com>
* Revert "Revert "gpu: nvgpu: Get coherency on gv100 + NVLINK working""Alex Waterman2018-03-03
| | | | | | | | | | | | | | | This reverts commit 5a35a95654d561fce09a3b9abf6b82bb7a29d74b. JIRA EVLR-2333 Change-Id: I923c32496c343d39d34f6d406c38a9f6ce7dc6e0 Signed-off-by: Alex Waterman <alexw@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1667167 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
* gpu: nvgpu: do not alloc ctx buffers if already allocatedSeema Khowala2018-03-01
| | | | | | | | | | | | | | Bug 200393029 Change-Id: Ic2946958e34bcb9247179fcf2e8735c822155cce Signed-off-by: Seema Khowala <seemaj@nvidia.com> Reviewed-on: https://git-master.nvidia.com/r/1665338 Reviewed-by: svc-mobile-coverity <svc-mobile-coverity@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Rajkumar Kasirajan <rkasirajan@nvidia.com> Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com> Reviewed-by: mobile promotions <svcmobile_promotions@nvidia.com> Tested-by: mobile promotions <svcmobile_promotions@nvidia.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-07-16 07:45:51 -0400